Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Popularity (sales)
- Display 15 Products per page
In Stock125mm Swivel Castor, 100kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS125TPR)
£7.87Keystone Appa... Read Moreratus / Institutional Castor with 125mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor with slotted bolt hole centres measuring 61.5/56 x 51.5/46.5 mm. The load capacity of this castor is 100kg using manual propulsion at 4km/h
Running on a quality ball bearing the wheel offers excellent rolling performance. This popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors and has a large plastic thread guard to protect the ball bearing from dirt ingress
- In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG200RUB)
£59.64200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
160mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG160PCB)
£76.04160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
160mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG160PAB)
£54.68160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG100CRPCB)
£42.61100mm Swivel Castor (Fabricated Steel) with 4 hole... Read More top plate and 105X80mm bolt hole centres. This castor comes with a Crown Tread Polyurethane Tyre on a cast iron centre wheel complete with Ball Bearing. Load Capacity = 300kg using manual propulsion at 4km/h (walking speed).Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Crowned Tread for easy manoeuvrability
- In Stock
200mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG200CRPCB)
£87.43200mm Swivel Castor (Fabricated Steel) and Crown T... Read Moreread Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 600kg - In Stock
150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150RUB)
£52.33150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kg - In Stock
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150EAB)
£38.67150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 300kg - In Stock
125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball Bearing, (KSMG125PCB)
£50.53125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kgKey Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 400kg (manual propulsion at 4km/h)
- Polyurethane tyre castor wheels offer high load capacity and exceptional wear resistance—lasting up to 10 times longer than rubber wheels under similar conditions. With a soft tread that’s softer than concrete, they won’t damage floors and operate with minimal noise. Resistant to oils, greases, petrol, and a wide range of chemicals, they’re ideal for demanding environments.
- In Stock
125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Ball Bearing, (KSMG125EAB)
£38.31125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith with 105x80mm Fixing Bolt Hole Centres. This castor is fitted with a Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 250kg using manual propulsion at 4km/h (walking speed).Key Specifications & Features- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Load Capacity: 250kg (manual propulsion at 4km/h)
- Elastic rubber tyre castor wheels have a higher load capacity and lower rolling resistance (easier to get moving) than normal rubber tyre. They have a high resistance to wear and offer excellent running and operating comfort.
- In Stock
125mm Fabricated Steel Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG125CRPCB)
£55.12125mm Swivel Castor (Fabricated Steel) with 105x80... Read Moremm Fixing Bolt Hole Centres. The wheel has a Crown Tread Polyurethane Tyred on Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 350kgKey Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Tread Hardness: 92 +/-3 Shore A
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Crowned Polyurethane Tread for easy manoeuvrability.
- In Stock
100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Ball Bearing (KSMG100NYB)
£33.02100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. This castor houses a Nylon Wheel with Ball Bearing. Load Capacity = 270kg using manual propulsion at 4km/h (walking speed),Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 270kg (manual propulsion at 4km/h)
- Nylon castor wheels have a high load capacity at a low cost. They are maintenance free and extremely resistant to water, salts, greases, acids and alkalis
- In Stock
200mm Swivel Castor, 2000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT200ASFHUD)
Original price was: £546.24.£343.06Current price is: £343.06.Sale!200mm Polyuretha... Read Morene tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 2000kg at 4km/hThis high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are criticalThe swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head. - In Stock
150mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT150ASFHUD)
Original price was: £476.39.£299.19Current price is: £299.19.Sale!150mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes incorporate the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- Out of Stock - On the Way
125mm Swivel Castor, 1500kg Capacity | Cast Nylon Wheel, Ball bearing (GXT125ASFMCD)
Original price was: £376.72.£236.60Current price is: £236.60.Sale!125mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
