Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock35mm Compact Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBH)
£10.2935mm Low Level swivel castor with 10mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg- In Stock
100mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG100PCB)
£41.72100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 350kg using manual propulsion at 4km/h (walking speed).Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Tread Hardness: 92 +/-3 Shore A
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Polyurethane tyre castor wheels offer high load capacity and exceptional wear resistance—lasting up to 10 times longer than rubber wheels under similar conditions. With a soft tread that’s softer than concrete, they won’t damage floors and operate with minimal noise. Resistant to oils, greases, petrol, and a wide range of chemicals, they’re ideal for demanding environments.
- In Stock
125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV125PN2B)
£13.05125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 200kg - In Stock
100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Roller Bearing (TS4100NY14)
£22.34100mm Swivel Castor (REVVO Brand) with a White Nyl... Read Moreon Wheel. The top plate measures 135mm x 110mm and the Fixing Bolt Hole Centres are 105x80mm.The castor wheel has a 35mm Tread Width with a Needle Roller Bearing and the Load Capacity is 225kg using manual propulsion at 4km/h (walking speed).The white nylon wheel is a hard tread which provides the lowest rolling resistance and maximum mobility. Being nylon the wheel is non-marking and will not damage concrete floors. - In Stock
Swivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2B)
£614.98250mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint.This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance.The Castor Has A 2800kg Load Rating At 4Km/H - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (XS100NYB130)
Original price was: £6.36.£5.97Current price is: £5.97.Sale!100mm Top Plate Swivel Castor with 80mm x 60mm Bol... Read Moret Hole Centres and a White Nylon Wheel with Needle Roller Bearing. The castor is made from Pressed Steel and the bolt holes are slotted to 80/77mm x 60mm and each of the 4 holes suit an 8mm fixing bolt. The load capacity is 150kg using manual propulsion at 4km/h (walking speed) - In Stock
200mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSK200RN2B)
£42.48200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Black Nylon Centre Wheel with Ball Bearings. Load Capacity = 400kg.Elastic Rubber Tyres have a soft tread and are both gentle on floors and non-marking. They are an excellent choice when a rubber tyre is needed and the weight to be carried is more than what a castor with a standard rubber tyre can hold. - In Stock
35mm Compact Braked Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBHBR)
£11.7835mm Low Level swivel with brake castor with 10mm ... Read MoreSingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
160mm Swivel Castor, 300kg Capacity | Nylon Wheel, Roller Bearing (MSV160NY1B)
£20.84160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 300kg - In Stock
125mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS125RNBBH)
£38.43125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH100PN1B)
£8.28100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a roller bearing fitted into a single bolt hole pressed steel swivel castor bracket. The Swivel Bracket has 12mm single bolt hole. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
- In Stock
Swivel Castor (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST300PC2B)
£770.74300mm Twin Wheel Extra Heavy Duty Swivel Castor. T... Read Morehe Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg. - In Stock
80mm Swivel Castor Threaded Stem, 90kg Capacity | Blue Rubber Tyre wheel, Plain Bore (K361RNST)
£10.8780mm Stem Fitting Swivel Castor with M12x25mm Thre... Read Moreaded Stem. Blue Rubber Tyre Wheel with a Nylon Centre and Plain Bore. The Load Capacity of this castor is 90kg at 4km/h using manual propulsion.This castor has a ball bearing swivel head and finished with a bright zinc plating.Key Specifications:- Threaded Stem Size: M12x25mm
- Overall Height: 95mm
- Wheel Material: Blue Elastic Rubber Tyre on a Black Nylon Centre
- Swivel Radius: 64.5mm
- In Stock
160mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSZH160PN1B)
£24.27160mm Single Bolt Hole (16mm) Swivel Castor (Press... Read Moreed Steel). The wheel has a Red Polyurethane Tyre (Shore A 92) on a White Nylon Centre with a Roller Bearing. The Load Capacity is 300kg using manual propulsion at 4km/h (walking speed).Key Specifications:- Bolt Hole Size: 16mm (To reduce the bolt hole to suit a 12mm fixing bolt, a reducing washer can be used. Click here for the ACZ600.)
- Overall Height: 185mm
- Tread Width: 40mm
- Bearing Type: Roller Bearing
- Swivel Radius: 140mm
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
- In Stock
150mm Swivel Castor, 370kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH150RU15)
£95.17150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 370kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
