Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock63mm Black Footmaster Levelling Castor, Plate Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80FBLACK)
£51.3663mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 28mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load (GD-80-F-NYN-BLK)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.- In Stock
200mm Swivel Castor, 535kg Capacity | Rubber Tyre Wheel, Ball Bearing, (TSH200RU2H)
£137.73200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 535kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- Power Towable to 6km/h.
- In Stock
125mm Black Swivel Castor, 220kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV125BRN2B)
Original price was: £21.60.£15.12Current price is: £15.12.Sale!125mm All Black Swivel Castor with Black Elastic R... Read Moreubber Tyre on a nylon centre wheel with a single ball bearing. This castor is designed for theatre applications to reduce reflection from lighting. It can also be used in any application where a pressed steel castor is required.The Swivel Brake Bracket has a 4 hole top plate with 80/77x60mm bolt hole spacing. The load capacity of this castor is 220kg using manual propulsion at 4km/h (walking speed)The Black Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is quiet and gentle on floors. The soft tread rubber (65 Shore A) absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.DOWNLOAD CATALOGUE PAGE HERE - In Stock
80mm High Temperature Swivel Castor, 100kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX080HTBH)
£19.6880mm Single Bolt Hole Swivel Castor (Pressed Steel... Read More) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 100kg - In Stock
75mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV075RMB)
£4.2675mm Top plate Swivel Castor with a Black Rubber T... Read Moreyre Wheel on a pressed steel centre. It has 55x42mm bolt hole centres and a load capacity of 50kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. - In Stock
100mm Swivel Castor | Polyurethane Tyre Wheel, Roller Bearing, 180kg Capacity (MSZ100PN1B)
£12.82100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 180kg using manual propulsion at 4km/h (walking speed)Key Specification:- Top Plate Size: 105x80mm
- Bolt Hole Centres: 80/76X60mm
- Bolt Hole Size: 9mm (to suit M8 Fixing Bolts)
- Overall Height: 125mm
- Offset: 36mm
- Swivel Radius: 86mm
- Tread width: 34mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
- Out of Stock - On the Way
60mm Low Level Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PTB200)
£54.6560mm Low Level Swivel Castor with 80x60mm Hole Cen... Read Moretres. Polyurethane Wheel with Ball bearing. Load Capacity = 200kg - In Stock
80mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080GRP1B)
£6.3680mm Grey Rubber Tyre wheel on a plastic centre wi... Read Moreth a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 70kg using manual propulsion at 4km/h (walking speed)The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications. - In Stock
100mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV100GRP1B)
£6.66100mm Grey Rubber Tyre wheel on a plastic centre w... Read Moreith a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 75kg using manual propulsion at 4km/h (walking speed)The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications. - In Stock
125mm Swivel Castor, 225kg Capacity | Rubber Tyre Wheel, Ball bearing, (HKS12520341)
£87.87125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Elastic Rubber Tyre / Aluminium Centre Wheel with Ball bearing. Load Capacity = 225kg - Out of Stock - On the Way
250mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS250PCB1500A)
£231.00250mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1500kg - In Stock
100mm Swivel Castor, 900kg Capacity | Nylon Wheel, Ball bearing (GXT100ASFMCD)
Original price was: £204.12.£128.20Current price is: £128.20.Sale!100mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a double thrust bearing in the swivel head to optimise the load capacity. The fixing bolt spacings are the European Standard size of 80x60mm. The load capacity of this castor is 900kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. The extra strong welded castor frame is powder coated to protect the frame and top plate and it is fitted with a high performance castor wheel containing two ball bearings. The bearings turn on a specially designed integrated axle shaft arrangement making this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
The double thrust bearing in the swivel head optimise heavy loads
- In Stock
50mm Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60F-80×60)
£32.5650mm Foot Master Levelling Castor with a black pow... Read Moreder coating finish. This product has a 4-hole top plate with European Size Top Plate Fitting with 80x60mm Bolt Hole Centres. The top plate is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load (GD-60-F-NYN-80x60)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
Swivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2BD)
£454.87150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor fitted with a directional lock to fix the swivel head in position. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 230mm x 230mm with bolt hole spacings of 190mm x 190mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
- In Stock
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321028)
£10.58125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
