Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Popularity (sales)
- Display 15 Products per page
In Stock50mm Compact Swivel Castor, 150kg Capacity | 50mm Polyurethane Tyre Wheel, Ball bearing (KS050PT2B)
£15.6550mm Low Level swivel castor with 90x66mm Top Plat... Read Moree and 75/61x51/45mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 73mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg- In Stock
50mm Compact Swivel Castor, 200kg Capacity | 50mm Nylon Wheel, Ball bearing (KS050NYBJ200)
£9.1250mm Low Level swivel castor (Black Painted Frame)... Read More. This High Load small and compact Low Level compact castor has an overall height of 71mm and a Black Nylon Wheel with Ball bearings. The Load Capacity is 200kg using manual propulsion at 4km/hKey Specifications:- Top Plate Size: 71x55mm
- Fixing Bolt Hole Centres: 53x36mm
- Fixing Bolt Hole size: 6mm
- Overall Height: 71mm
- Swivel Radius: 55mm
- Wheel Material: Black Nylon
- Bearing Type: Ball Bearings
- Tread width: 24mm
- Load Capacity: 200kg
- In Stock
63mm Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80S)
£48.0963mm Foot Master Levelling Castor with an M12 x 18... Read Moremm Threaded Stem finished in an ivory coloured powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load (GD-80-S-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
80mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSZH080PN1B)
£7.1880mm Single Bolt Hole (12mm) Swivel Castor (Presse... Read Mored Steel). Polyurethane Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 130kg using manual propulsion at 4km/h. - In Stock
42mm Footmaster Levelling Castor, Plate Fitting, 60kg Capacity | 42mm Nylon Wheel (KGD-40F)
£21.8242mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 42mm x 42mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 20mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 60kg Static Load and 30kg Dynamic Load (GD-40-F-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
200mm Swivel Castor, 205kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV200RMB)
£21.03200mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres, an overall height of 235mm and a load capacity of 205kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. - In Stock
75mm Swivel Castor, 170kg Capacity | Nylon Wheel, Plain Bore (361NYST)
£14.0675mm Stem Fitting Swivel Castor (Flexello Pressed ... Read MoreSteel) with M12x25mm Threaded Stem. The castor houses a white Nylon Wheel with Plain Bore. Load Capacity = 170kg.The Nylon castor wheel is a hard tread made from quality nylon. It will not damage or mark concrete floors and is not susceptible to picking up floor debris and swarf. Nylon is a popular wheel choice because it is light weight and has a high load capacity relative to other wheel materials of the same size. It is not affected by water and is insensitive to many chemicals apart from acids. - In Stock
50mm Footmaster Levelling Castor, 250kg Capacity | Nylon Wheel (KGDR-60F)
£47.5550mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber pad vibration damping rubber pad. This foot pad has a Retractable Ratchet operation.This product's load capacity has been increased to 280kg Static Load and 140kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS100RNB)
£24.97100mm Top Plate Swivel Castor (Stainless Steel Bra... Read Morecket) with 80x60mm Hole Centres and 128mm overall height.The non-marking Elastic Blue Rubber Tyre / Nylon Centre Wheel has a 36mm Tread Width and contains a Stainless Steel Needle Roller Bearing to reduce the rolling resistance. Load Capacity = 150kg - In Stock
80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080RN1B)
£8.7980mm Blue Elastic Rubber Tyre (65 Shore A) wheel o... Read Moren a nylon centre with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Top Plate Size: 105x80mm
- Bolt Hole Centre: 80/77x60mm
- Bolt Hole Size: 9mm (to suit 8mm fixing bolts)
- Overall Height: 105mm
- Castor Offset: 40mm
- Swivel Radius: 90mm
- Bearing Type: Roller Bearing
- Wheel Material: Blue Elastic Rubber Tyre on Black Nylon Centre
- Shore Hardness: 65A
- In Stock
125mm Black Swivel Castor, 220kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV125BRN2B)
Original price was: £21.60.£15.12Current price is: £15.12.Sale!125mm All Black Swivel Castor with Black Elastic R... Read Moreubber Tyre on a nylon centre wheel with a single ball bearing. This castor is designed for theatre applications to reduce reflection from lighting. It can also be used in any application where a pressed steel castor is required.The Swivel Brake Bracket has a 4 hole top plate with 80/77x60mm bolt hole spacing. The load capacity of this castor is 220kg using manual propulsion at 4km/h (walking speed)The Black Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is quiet and gentle on floors. The soft tread rubber (65 Shore A) absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.DOWNLOAD CATALOGUE PAGE HERE - In Stock
50mm Footmaster Levelling Castor, 250kg Capacity | Nylon Wheel (KGDR-60S)
£46.47M12 x 18mm Threaded Stem Fitting Foot Master Le... Read Morevelling Castor with an ivory coloured powder coating finish. This product has a black Nylon Wheel with a 25mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Retractable Ratchet operation.
.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- In Stock
35mm Compact Braked Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBHBR)
£11.7835mm Low Level swivel with brake castor with 10mm ... Read MoreSingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
125mm High Temperature Swivel Castor, 150kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX125HT)
£34.25125mm High Temperature Swivel Castor (Pressed Stee... Read Morel). The top plate has four fixing holes with 80x60mm Bolt Hole spacing and the wheel is made from black phenolic resin with a smooth plain bore. It is Rated to +280 degrees C and has a load capacity of 150kg - In Stock
80mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV080PN1B)
£7.9780mm Red Polyurethane Tyre on a Nylon Centre Wheel... Read More with a roller bearing fitted into a pressed steel Swivel Castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Top Plate Size: 105x80mm
- Bolt Hole Centre: 80/77x60mm
- Bolt Hole Size: 9mm (to suit 8mm fixing bolts)
- Overall Height: 105mm
- Castor Offset: 40mm
- Bearing Type: Roller Bearing
- Wheel Material: Red Polyurethane Tyre on Grey Nylon Centre
- Shore Hardness: 95A
