Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Popularity (sales)
- Display 15 Products per page
In Stock42mm Footmaster Levelling Castor, Plate Fitting, 60kg Capacity | 42mm Nylon Wheel (KGD-40F)
£21.8242mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 42mm x 42mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 20mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 60kg Static Load and 30kg Dynamic Load (GD-40-F-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.- In Stock
100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Plain Bore (TS4100NY04)
£20.19100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 225kg - In Stock
97mm Footmaster Levelling Castor, Plate Fitting, 1500kg Capacity | 97mm Nylon Wheel (KGD-150F)
£95.5997mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting (GD-150-F-MCN). 1500kg Static and 750kg Dynamic Load Capacity. The Die Cast Aluminium Foot Pad is operated by a Hex Adjuster with M20 Leveler (Spanner not included)The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. - In Stock
100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (MSW100APCB)
Original price was: £36.76.£20.22Current price is: £20.22.Sale!100mm Top Plate Swivel Castor with an extra strong... Read More fabricated (welded) bracket. This castor has a top plate with 4 fixing holes with 105x80mm bolt hole centres. The wheel is a Polyurethane Tyre / Cast Iron Centre Wheel running on two Ball Bearings for exceptional rolling performance. This castor has a Load Capacity of 300kg using manual propulsion at 4 km/h (walking speed).Key Specifications- Top Plate Dimensions: 135x110mm
- Bolt Hole Centres: 105x80/75mm
- Bolt Hole Size: 11mm (suits 10mm Fixing Bolts)
- Overall Height: 146mm
- Offset: 30mm +/- 2mm
- Wheel Material: Polyurethane Tyre on a Cast Iron Centre
- Tread Width: 40mm
- Bearing Type: Ball Bearings
- In Stock
50mm Compact Swivel Castor, 200kg Capacity | 50mm Nylon Wheel, Ball bearing (KS050NYBJ200)
£9.1250mm Low Level swivel castor (Black Painted Frame)... Read More. This High Load small and compact Low Level compact castor has an overall height of 71mm and a Black Nylon Wheel with Ball bearings. The Load Capacity is 200kg using manual propulsion at 4km/hKey Specifications:- Top Plate Size: 71x55mm
- Fixing Bolt Hole Centres: 53x36mm
- Fixing Bolt Hole size: 6mm
- Overall Height: 71mm
- Swivel Radius: 55mm
- Wheel Material: Black Nylon
- Bearing Type: Ball Bearings
- Tread width: 24mm
- Load Capacity: 200kg
- In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV100PN2B)
£9.44100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.</p> - In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 1000kg Capacity | Nylon Wheel (KGD-120F)
£67.7775mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting (GD-120-F-NYN). 1000kg Static and 500kg Dynamic Load Capacity. Die Cast Aluminium Foot Pad. Hex Adjuster with M16 Leveller (Spanner not included)This is a multi-functional swivel castor that provides mobility and levelling functions which allows users to move and position large equipment into place with added stability using the levelling feature.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. - In Stock
50mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV050RPBH)
£2.3850mm Single Bolt Hole Swivel Castor with a non mar... Read Moreking Grey Rubber Tyre Wheel with a nylon centre. This castor has a 10mm Single Bolt Hole Swivel Castor and has a Pressed Steel frame. The load capacity is 50kg using manual propulsion at 4km/hThe a grey rubber tyre that will not mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings - In Stock
100mm Swivel Castor, 200kg Capacity | Wheel, Roller Bearing (LSV100RNB200)
£15.17100mm Elastic Bl... Read Moreue Rubber Tyre Wheel on a black nylon centre fitted into a Top Plate Swivel Castor with 80x60mm bolt hole centres. The load capacity of this castor is 200kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with an elastic blue rubber tyre that provides a higher load capacity than a standard grey or black rubber tyred wheel. The wheel is fitted with a roller bearing that offers low rolling resistance and rubber tyre is gentle on floors. This castor is ideal for most general purpose domestic or industrial castor where the travel speed of the castor is low and generally should not exceed 4km/h (walking speed). - In Stock
100mm Spring Loaded Gate Castor with non-marking wheel, 57kg Load Capacity (GCLD100)
Original price was: £13.09.£10.11Current price is: £10.11.Sale!Standard Gate Castor spring loaded for use on unev... Read Moreen surfaces. This gate castor comes with a swivel castor bracket with a 100mm non-marking wheel. It comes pre-drilled with two 10mm fixing holes spaced 60mm apart.Spring loaded gate castors help with opening and closing heavy gates (57kg) and because the spring allows the height to adjust with when it moves, it is suitable for use on uneven surfaces. The gate castor will help support the gate to help prevent it from dragging on the floor and hinge damage - In Stock
75mm Footmaster Castor with Levelling Foot, 700kg Capacity | Nylon Wheel, Ball bearing (KGDL75ASFNYD)
Original price was: £85.44.£51.03Current price is: £51.03.Sale!This 75mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot (GDL-75-ASF-NYD). This castor is a swivel castor with a load capacity of 700kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The overall height of the castor is 110mm and the adjustable foot can extend by up to 18mm to enable precise levelling.The load capacity of this product is 700kg and the recommended maximum total load over 4 castors is 2,100kg. - Out of Stock - On the Way
75mm Footmaster Levelling Castor, Stem Fitting, 100kg Capacity | Nylon Wheel (KGD-120S)
£67.7775mm Footmaster Levelling Castor with M16x 24mm St... Read Moreem Fitting (GD-120-S-NYN). 1000kg Static and 500kg Dynamic Load Capacity. Die Cast Aluminium Foot Pad. Hex Adjuster with M16 Leveler (Spanner not included)The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. - In Stock
80mm Swivel Castor, 130kg Capacity | Nylon Wheel, Roller Bearing (MSVH080NY1B)
£6.6480mm Single Bolt Hole (12mm) Swivel Castor with Ny... Read Morelon Wheel with Roller Bearing. Load Capacity = 130kg - In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH100RN1B)
£9.53100mm Blue Elastic Rubber Tyre wheel on a nylon ce... Read Morentre with a roller bearing fitted into a pressed steel single bolt hole swivel castor bracket to suit a 12mm bolt. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)Key Specification:- Bolt Hole Size: 13mm (to suit 12mm Fixing Bolt)
- Overall Height: 127mm
- Offset: 40mm
- Swivel Radius: 90mm
- Tread width: 35mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 65
- High Load Capacity
- Low Rolling Resistance
- Non-Marking & Gentle on Floors
- Reduce Vibration
- Low noise Operation
- In Stock
125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSK125PN1B)
£16.30125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Hole Centres and 157mm Overall Height. Polyurethane Tyre caster wheel with a nylon Centre Wheel and 34mm Tread Width with Roller Bearing. Load Capacity = 250kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.
