- Sorry, this product cannot be purchased.
- Display 15 Products per page
-
In StockHigh Temperature Wheel 100mm | Phenolic Resin, 305kg, 15mm Plain Bore (WAN4M15)
£6.68100mm High Temperature Phenolic Resin Wheel (ra... Read Moreted to 120 Degrees Celsius) with 41mm Hub Length (distance through the central bore) and a 15mm Smooth Plain Bore. Load Capacity = 305Kg.
-
In Stock125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball Bearing, (KSMG125PCB)
£50.53125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kg Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 400kg (manual propulsion at 4km/h)
- Polyurethane tyre castor wheels offer high load capacity and exceptional wear resistance—lasting up to 10 times longer than rubber wheels under similar conditions. With a soft tread that’s softer than concrete, they won’t damage floors and operate with minimal noise. Resistant to oils, greases, petrol, and a wide range of chemicals, they’re ideal for demanding environments.
-
In Stock50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (2SL050PT0L)
Original price was: £26.21.£24.59Current price is: £24.59. Sale!50mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend). The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg. This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation. This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes)
-
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH125NY1B)
£9.43125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock200mm Fixed Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (MFK200NY2B)
£33.16200mm Top Plate Fixed Castor (Pressed Steel) with ... Read More105x80mm Bolt Hole Centres. White Nylon Wheel with Ball Bearing. Load Capacity = 500kg -
In StockAdjustable Feet, Tilting, M10 x 100mm Stem, 250kg Load Capacity, 55mm Base (GL55XM10X100T)
£2.17Tilting Adjustable Levelling Feet with M10 x 100mm... Read More Stem and 55mm Base Diameter (20mm Base Height). Maximum Tile Angle = 20 Degrees. Load Capacity = 250kg -
In StockPallet Roller, 82mm X 100mm, Nylon, Without Bearing (47x14mm Bearing Seat), 900kg (KR82100NY)
£14.9282mm X 100mm White Nylon Pallet Roller sold withou... Read Moret bearings and has a 47mm x 14mm bearing seat. Load Capacity = 900kg. -
In Stock63mm Footmaster Levelling Castor, 500kg Capacity | 63mm Nylon Wheel (KGDR-80F)
£65.0763mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting. 500kg Static and 250kg Dynamic Load Capacity Die Cast Aluminium Foot Pad With Vibration Damping Rubber Pad. Nylon Handwheel with Retractable Ratchet. The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. -
In StockDesigner Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 20mm Ball Bearing (10040PT220)
£105.70100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 20mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock125mm AGV Swivel Castor, Twin Wheel, 440kg Load | Polyurethane Wheel, Ball bearing (GATD125ASFHUD)
Original price was: £700.30.£270.65Current price is: £270.65. Sale!This Twin wheel ... Read More125mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In StockThreaded Inset, Square, M10 | Suits 25mm x 25mm Tube OD with 1.5mm Wall Thickness (SQRM105807)
£0.95Square Insert with M10 Thread for Square tube with... Read More outside Diameter of 25mm x 25mm and wall thickness of 1.5mm. Load Capacity = 200kg -
In Stock
160mm Fixed Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (MFK160NY2B)
£27.75160mm Top Plate Fixed Castor (Pressed Steel) with ... Read More105x80mm Fixing Bolt Hole Centres. Nylon Wheel with a 50mm Tread Width and Ball Bearings. Load Capacity = 500kg. This castor is made from 4mm thick heavy gauge pressed steel. It is a product that is built to last and is great for arduous applications. The white nylon castor wheel is a hard tread and contains Ball Bearings which ensures the lowest rolling resistance. Nylon is probably the most popular wheel used because it is relatively inexpensive, strong and long lasting. It is unaffected by water and resistant to most chemicals except acids and chlorines.
-
Out of Stock - On the WayTeflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.11Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree. This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. -
In Stock200mm Swivel Castor with Brake, 500kg Capacity | Nylon wheel, Roller Bearing (MSK200NY1BBR)
£35.55200mm Top Plate Swivel Castor with Brake (Pressed ... Read MoreSteel) with 105x80mm Bolt Hole Centres. White Nylon Wheel with a Needle Roller Bearing. Load Capacity = 500kg. The brake is a total stop brake (also known as a swivel & wheel brake) because it stops both the wheel and the swivel rotation when applied. The pressed steel housing is made from heavy gauge steel with a 5mm thick Top Plate and 4mm thick forks, it is a castor built to last and suitable for arduous applications.
-
In Stock125mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Plain Bore (KS125APNBHBR)
£19.74125mm Single Bolt Hole (12mm) Swivel Castor wi... Read Moreth brake and Red Polyurethane Tyre on a White Nylon Centred Wheel (Plain Bore). The Load Capacity of this castor is 130kg using manual propulsion at 4 km/h.
The brake on this castor is a Total Stop Brake which is also known as a Swivel and Wheel Brake. This means that when the brake is applied, not only is the wheel braked but the swivel action is also locked.
A Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. Polyurethane is also non-marking and gentle on floors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
