- Display 15 Products per page
In Stock125mm Fixed Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MFV125PN2B)
£11.69125mm Top Plate Fixed Castor (Pressed Steel) with ... Read More80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 200kg- In Stock
Castor Wheel 125mm | Polyurethane Tyre / Nylon, 180kg, 12mm Plain Bore (125NT04)
£12.38125mm Maroon coloured Polyurethane Tyre Castor Whe... Read Moreel with a White Nylon Centre, 35mm Tread Width, 12mm Smooth Plain Bore and 45mm Hub Length. The load capacity of this wheel is 180kg using manual propulsion at 4km/h. - In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . - In Stock
Pneumatic Wheel 400mm | Pneumatic Tyre / Red Polypropylene Centre, 150kg, 25.4mm Roller Bearing (PWP400RB1)
£30.79400mm Black Pneumatic Rubber Tyre / Red Polypropyl... Read Moreene Centre Wheel (4.8/4.00-8). This size wheel is often referred to as a 16" or 16 Inch Wheel. It has a 4 Ply rating tyre with Rib tread, 63mm Hub Length and 1 inch (1" or 25.4mm) Roller Bearing. Load Capacity = 150kg.Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impact loads from bad floors. - Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 30mm Plain Bore (20060PT030)
£168.88200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 700kg, 20mm Ball Bearing (15035PT220)
£138.83150mm Polyurethane Tyred (Premium Grade Revvothane... Read More) on a Cast Iron Centre Wheel with 20mm Ball Bearing.This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
50mm Swivel and Brake Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBHBR)
£3.32This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor with brake (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
100mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV100RP)
£5.68100mm Top Plate Swivel Castor with a Grey Rubber T... Read Moreyre Wheel on a Nylon Centre fitted. It has 80x60mm bolt hole centres and the load capacity is 70kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed. - In Stock
160mm Swivel Castor with Brake, 400kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSK160PN1BBR)
£47.37160mm Top Plate Swivel Castor With Brake (Pressed ... Read MoreSteel) With 105X80mm Fixing Bolt Hole Centres. Red Polyurethane Tyre on a white Nylon Centre Wheel With a Needle Roller Bearing. Load Capacity = 400Kg. - In Stock
Puncture Proof Wheel 370mm | Puncture Proof Tyre / Red Steel Centre, 170kg, 20mm Roller Bearing (PP370RSB20R)
£71.08370mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Rib Tread on a Red Steel Centre. This Wheel has a 20mm Roller Bearing, 100mm Tread Width, 65mm Hub Length, and 170kg Load Capacity - In Stock
100mm Swivel and Brake Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1322828)
£17.98100mm Bolt Hole Swivel Castor with a Swivel & ... Read MoreWheel brake (Pressed Steel) and a 10mm Single Bolt Hole Fitting. The wheel has a Blue Rubber Tyre (non-marking) on a black Nylon Centre with a single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h (walking speed). - In Stock
100mm Swivel Castor with Brake, 150kg Capacity | Nylon Wheel, Plain Bore (1322720)
£12.80100mm Top Plate Swivel Castor and Swivel & ... Read MoreWheel Brake (Pressed Steel) with 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
50mm Stainless Steel Fixed Castor, 50kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATF050TPR)
£6.68This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 50mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The Fixed bracket has a 55x55mm 4 hole Top Plate with slotted fixing bolt holes at 44/38.5x44/38.5mm. The load capacity of this castor is 50kg using manual propulsion at 4km/hThe grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors.Download Series Data Sheet here - In Stock
160mm Swivel Castor, 480kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK160PN2B)
£35.60160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Red Polyurethane Tyre on a White Nylon Centre Wheel with Ball Bearings. Load Capacity = 480kg. - In Stock
200mm Fixed Castor, 1000kg Capacity | Nylon Wheel, Ball bearing (HKF20020111)
£78.76200mm Top Plate Fixed Castor (Fabricated Steel) wi... Read Moreth 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 1000kg
