- Display 45 Products per page
In Stock125mm Swivel Castor, 170kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH125RU1H)
£100.57125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 170kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
200mm Swivel Castor with Brake, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800SWB)
£100.86200mm Swivel Castor with Total Stop Brake (Heavy G... Read Moreauge Pressed Steel Frame). This castor has a 135mm x 110mm Top Plate with 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- In Stock
100mm Shock Absorbing Swivel & Wheel Brake Castor With Brake, 100kg Capacity | Polyurethane Tyre Wheel (GDSB100BSFLUD75)
£101.58... Read More-variant-east-asian: normal; font-size: 14px;">100mm Shock Absorbing Swivel Castor with a swivel and wheel brake (also known as a total stop brake). This bracket houses a Polyurethane tyre wheel with an Aluminium Centre and precision ball bearings, The polyurethane tyre has a shore hardness of A90 and the Load Capacity of the castor is 100kg.
The Overall height without a load is 171mm and this reduces incrementally by up to 20mm as load increases (see image 2 - GDS100 Curve). It is fully compressed with a load of 75kg.
This is the only shock absorbing castor available with a total stop brake. The patented braking system over comes the issue of locking a swivel head that can move up and down providing customers with a castor that when braked, will stop any movement in the swivel head.
- Out of Stock - On the Way
150mm Swivel Castor, 600kg Capacity | Nylon Wheel, Ball bearing (HKS15020111)
£101.63150mm Top Plate Swivel Castor (Fabricated Steel Br... Read Moreacket) with 105x80mm Bolt Hole Centres. Solid White Nylon Wheel with Ball bearing. Load Capacity = 600kg - In Stock
150mm Swivel Castor with Brake, 600kg Capacity | Cast Iron Wheel, Ball bearing (HKB15020441)
£101.83150mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with a Cast Iron Wheel with Ball bearings. Load Capacity = 600kg using manual propulsion at 4 km/h (walking speed)Key Specifications:- Brake Style: Swivel & Wheel Brake (also known as a Total Stop Brake) which locks both the wheel and the swivel rotation.
- Top Plate Size: 149mm x 110mm
- Bolt Hole Centres: 120/105mm x 80/60mm
- Overall Height: 202mm
- Tread Width: 45mm
- In Stock
200mm Swivel Castor, 1090kg Capacity | Cast Iron Wheel, Roller Bearing (855CIB)
£101.91200mm Top Plate Swivel Castor with 140x105mm Bolt ... Read MoreHole Centres each suiting an M10 fixing bolt. The heavy duty bracket has a swivel head with roller ball bearings and has a grease nipple. The pressed steel frame has a bright zinc finish. This castor houses a quality Flexello Cast Iron Wheel that has a Roller Bearing fitted into the central bore to reducing rolling resistance. The Load Capacity of this castor is 1090kg. - Out of Stock - On the Way
125mm Swivel Castor, 425kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH125PT1H)
£102.06125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 425kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
125mm Swivel Castor with Brake, 500kg Capacity | Cast Iron Wheel, Ball bearing (HKB12520441)
£102.07125mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 500kg - Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 700kg, 20mm Plain Bore (15035PT020)
£102.30150mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 20mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Fixed Castor, 1000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKF20020241)
£102.35200mm Top Plate Fixed Castor (Fabricated Steel) wi... Read Moreth 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 1000kg - Out of Stock - On the Way
150mm Swivel Castor, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKS15020241)
£102.45150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 700kg - In Stock
100mm Fixed Castor, 900kg Capacity | Nylon Wheel, Ball bearing (GXT100ARFMCD)
Original price was: £163.28.£102.54Current price is: £102.54.Sale!100mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Fixed Castor with 80x60mm bolt hole centres. The load capacity of this castor is 900kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
- In Stock
200mm Swivel Castor, 1150kg Capacity | Cast Iron Wheel, Roller Bearing (TSH200CI15)
£102.71200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 1150kg.The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- In Stock
150mm Fixed Castor, 730kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TFH150PT2H)
£103.02150mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor) with 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with a 38mm Tread width and Ball Bearings. Load Capacity = 730kgThe Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- In Stock
100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH100PT2H)
£103.68100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor Bracket) with 105x80mm Fixing Hole Centres. The castor houses a Polyurethane Tyre Wheel on a Cast Iron Centre with two quality Ball Bearings for extremely low rolling resistance on heavy loads. The load capacity of this 100mm castors is 340kg.
Features of the Revvo H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822SUB)
£103.73200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg - Out of Stock - On the Way
250mm Fixed Castor, 1100kg Capacity | Nylon Wheel, Ball Bearing (KF250NYB1100)
£103.89250mm Top Plate Fixed Castor (Pressed Steel) with ... Read More160x120 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 1100kg - In Stock
50mm Stainless Steel Footmaster Levelling Castor, 280kg Capacity | Nylon Wheel, Plain Bore (KSGDN-60F)
Original price was: £148.64.£104.05Current price is: £104.05.Sale!50mm Stainless Steel Footmaster levelling castor h... Read Moreas a stainless steel forged steel plate and castor frame. This castor has a Top Plate Fitting and 280kg Static and 140kg Dynamic Load Capacity. Machine Cast Nylon Wheel With Vibration Damping Rubber Pad. Nylon Handwheel height adjustment operation. The overall height is 82mm when the wheel is engaged with a total lift of up to 15mm using the rubber footpad.This stainless steel Footmaster Levelling castor has a double ball bearing with hardened stainless steel bearings in the swivel head and has completely corrosion-resistant components applied.Footmaster levelling castors are a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place.Because of the lifting and lowering function, like regular Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load for each Footmaster Castor is half the castor's Static Load Capacity of when the castor is stationary and the foot-pads are lowered.This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity. - In Stock
200mm Fixed Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TFH200PT15)
£104.12200mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor) with 105x80/75mm Fixing Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1100kgThe Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- In Stock
100mm Heavy Duty Gate Castor , 110kg Capacity | Fixed Castor with Nylon Wheel (GCBF100NY)
£104.68100mm Gate Castor with 100mm Fixed Castor and Nylo... Read Moren Wheel. This gate castor has a black weatherproof finish for outdoor use. The bracket body is fabricated in heavy duty steel and the castor housing is zinc plated.The Telescopic Compression starts at 20kg of pressure and is fully compressed at 30kg with a maximum travel of 65mmThe side mounted plate has 12mm fixing bolt holes that are spaced 190mm apart and the mounted bracket will protrude 78mm from the gate it has been fitted to.Gate castors are important to support large doors or heavy sliding steel gates. Our gate castors are spring loaded and this self levelling spring incorporated into the gate castor copes with uneven floors and provides support for the door to alleviate some of the strain on the hinges. Furthermore, a suitable gate castor will prevent damage to your flooring caused by the door or gate dragging on the floor. - In Stock
200mm Swivel Castor with Brake, 600kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KBMG200PCB)
£105.13200mm Top Plate Swivel Castor with Brake (Fabricat... Read Moreed Steel) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 600kg - In Stock
200mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS200APCB800BR)
£105.67200mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Heavy Gauge Pressed Steel Bracket) with 105x80mm Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 800kg - In Stock
Designer Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 20mm Ball Bearing (10040PT220)
£105.70100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 20mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
160mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (4670FTP160P63)
£106.08160mm Top Plate Swivel Castor (Pressed Steel) With... Read More 105X80mm Bolt Hole Centres. This very heavy duty castor houses an extremely strong Polyurethane Tyre Wheel on a Cast Iron Centre Wheel With Ball Bearing. Load Capacity = 800Kg - In Stock
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Plain Bore (15050PT025)
£106.15150mm Polyurethane (Extra Heavy Duty) Tyre on a Ca... Read Morest Iron Centre Wheel with 25mm Smooth Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Fixed Castor, 1500kg Capacity | Nylon Wheel, Ball Bearing (TFH200NY2H)
£106.22200mm Heavy Duty Top Plate Fixed Castor (Fabric... Read Moreated Castor) with 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 1500kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- In Stock
150mm Swivel Castor, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HST150PC2B)
£106.25150mm Top Plate Swivel Castor (Black Painted Fabri... Read Morecated Steel) with 120mm x 60mm or 105x80mm Fixing Bolt Hole Centres. The wheel has a Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings and the load capacity is 700kg and 4km/h (walking speed) using manual propulsion. - In Stock
150mm Swivel Castor with Brake, 370kg Capacity | Rubber Tyre Wheel, Ball bearing (HKB15020341)
£107.83150mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 370kg - In Stock
150mm Swivel Castor with Brake, 520kg Capacity | Nylon Wheel, Roller Bearing (655NYBSWB)
£108.23150mm Flexello Top Plate Swivel Castor and Swivel ... Read More& Wheel Brake (Heavy Duty Pressed Steel) with 140X105mm Fixing Bolt Hole Centres. Nylon Wheel with a Roller Bearing. Load Capacity = 520kg. Recommended Maximumm Total Load over 4 Castors = 1560kg : 3 x Load Capacity of Castor (520kg)The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and has roller ball bearings in the swivel head. - In Stock
260mm Swivel Castor, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KS260PPD)
£108.23260mm Puncture Proof Swivel Castor (Pressed Steel)... Read More with 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kgThe wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. - In Stock
100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH100PT1H)
£108.74100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 340kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1045kg, 20mm Ball Bearing (WSU8BJM20)
£109.54200mm Red Polyurethane Tyre on a Red Painted Cast ... Read MoreIron Centre, 20mm Ball Bearing, 51mm Tread Width, 60mm Hub Length (the distance through the central bore) and a Load Capacity of 1045Kg - In Stock
100mm Heavy Duty Gate Castor, 110kg Capacity | Swivel Castor with Nylon Wheel (GCBS100NY)
£109.54100mm Gate Castor with 100mm Swivel Castor and Nyl... Read Moreon Wheel. It is finished with a black weatherproof coating for outdoor use. The bracket body is fabricated in heavy duty steel and the castor housing is zinc plated.The Telescopic Compression starts at 20kg of pressure and is fully compressed at 30kg with a maximum travel of 65mmThe side mounted plate has 12mm fixing bolt holes that are spaced 190mm apart and the mounted bracket will protrude 78mm from the gate it has been fitted to.Gate castors are important to support large doors or heavy sliding steel gates. Our gate castors are spring loaded and this self levelling spring incorporated into the gate castor copes with uneven floors and provides support for the door to alleviate some of the strain on the hinges. Furthermore, a suitable gate castor will prevent damage to your flooring caused by the door or gate dragging on the floor. - In Stock
150mm Swivel Castor with Brake, 400kg Capacity | Rubber Tyre Wheel, Roller Bearing (655RTBSWB)
£109.92150mm Top Plate Swivel Castor with Swivel &... Read More Wheel Brake. The 4 hole top plate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Rubber Tyre on Cast Iron Centre with a Needle Roller Bearing. Load Capacity = 400kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
- In Stock
125mm Swivel Castor with Brake, 400kg Capacity | Polyurethane Tyre Wheel, Ball bearing, (HKB12520241)
£109.96125mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 400kg - In Stock
Designer Polyurethane Tyre Wheel 125mm | Polyurethane Tyre / Cast Iron, 600kg, 25mm Ball Bearing (12545PT225)
£111.20125mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Swivel Castor, 535kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH200RU15)
£111.22200mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 535kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
Designer Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 25mm Ball Bearing (10040PT225)
£111.53100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Swivel Castor with Brake (Powder Coated), 900kg Capacity | Polyurethane Tyre Wheel (KGHP200BSFMUD)
Original price was: £192.50.£111.60Current price is: £111.60.Sale!200mm Heavy-duty Swivel & Wheel Brake Castor w... Read Moreith a Powder Coated Pressed Steel Bracket and a 250mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball BearingsFeatures:- 900kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Total Stop Brake System: Applying the brake pedal simultaneously locks both the wheel and the swivel rotation.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
- In Stock
150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (BS5150PC2BA)
£112.08150mm Bolt Hole Swivel Castor (Fabricated Steel) w... Read Moreith 19.8mm Single Bolt Hole (to suit a 3/4" fixing Bolt). This is an extra heavy duty single bolt hole castor and the wheel has a Polyurethane Tyre wheel on a Cast Iron Centre with 50mm Tread width and Ball Bearing fitted. The Load Capacity is 600kg at 4km/h (walking speed) using manual propulsion.Key Specifications:- Ball Bearing Swivel Head
- Wheel Bearing Type: Ball Bearing
- Overall Height: 200mm
- Tread Width: 50mm
- Offset: 44.5mm
- Fixing Bolt Hole Size: 19.8mm
- Zinc Plated
- Load Capacity: 600kg using manual propulsion at km/h (walking speed)
- In Stock
150mm Swivel Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (TSH150NY2H)
£112.09150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 800kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
150mm Swivel Castor, 725kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (655SUB)
Original price was: £145.52.£112.48Current price is: £112.48.Sale!150mm Top Plate Swivel Castor. The 4 hole top plat... Read Moree measures 162mm x 140mm with 140mm x 105mm Fixing Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Polyurethane Tyre on Cast Iron Centre with a needle roller bearing. Load Capacity = 725kg.The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head. - In Stock
82mm Low Level Swivel Castor, 650kg Capacity | 82mm Polyurethane Tyre Wheel, Ball bearing (KS8270PTB)
£112.5082mm Low Level Top Plate Swivel Castor (Low Level ... Read MoreCastor) with 140x105 Hole Centres. Polyurethane Wheel with Ball bearing. Load Capacity = 650kg - In Stock
Mini Scene Shifter Castor, 300kg Load Capacity (MINISS)
£114.30Move heavy loads effortlessly with the Mini Scene Shifter, engineered for smooth, precise handling. Built for demanding environments like theatres, studios, and event venues, this compact yet powerful sceneshifter features a durable swivel head and high-performance swivel castors designed for seamless mobility.
The solid steel Tri-Plate base with 55x55mm bolt hole centres ensures secure mounting, while the three 35mm polyurethane swivel castors provide superior grip and glide across a variety of surfaces. Each castor includes a ball journal wheel system to minimise friction and maximise control.
Key Features:
- Heavy-duty Mini SceneShifter with 300kg load capacity
- 3 high-quality swivel castors for 360° manoeuvrability
- Durable steel Tri-Plate with 55x55mm bolt hole centres
- Polyurethane-tyred castors for smooth and quiet operation
- Ball journal wheels reduce resistance for effortless movement
- Ideal for theatres, conference centres, production sets, and more
Whether you're staging a scene, shifting equipment, or managing backstage logistics, this mini sceneshifter is a dependable, heavy-duty solution for tight turns and heavy loads.
- In Stock
125mm Swivel Castor with Brake, 250kg Capacity | Rubber Tyre Wheel, Ball bearing, (HKB12520341)
£115.01125mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Elastic Rubber Tyre / Aluminium Centre Wheel with Ball bearing. Load Capacity = 250kg
