- Display 15 Products per page
Out of Stock - On the WayV Grooved Wheel 150mm | Cast Iron, 900kg, 20mm Ball bearing (KW150CV2H)
£54.03150mm V-Grooved (92 degree angle) Cast Iron Wheel ... Read Morewith 20mm Ball Bearings. Load Capacity = 900kg- In Stock
Pneumatic Wheel 360mm | Pneumatic Tyre / Red Polypropylene Centre, 125kg, 25.4mm Roller Bearing (PWP360RB1)
£28.17360mm Black Pneumatic Rubber Tyre on a Red Polypro... Read Morepylene Centre Wheel (3.50-8). 4 Ply rating tyre with Rib tread, 63mm Hub Length and 1 inch (25.4mm) Roller Bearing. Load Capacity = 125kg.Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impact loads from bad floors. - In Stock
125mm Swivel Castor, 100kg Capacity | Grey Rubber Tyre Wheel, Roller Bearing (MSV125GRP1B)
£8.85125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Grey Non-Marking Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 100kg - In Stock
100mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1322788)
£13.55100mm Bolt Hole Swivel Castor and Swivel & Whe... Read Moreel brake (Pressed Steel) with 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg - In Stock
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 50mm Plain Bore Keywayed (30075PTU50)
£401.96300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 50mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 300mm | Polyurethane Tyre / Cast Iron Centre, 4080kg, 31.8mm Taper Roller (WSU312TM)
£499.95300mm Red Polyurethane Tyre on a Cast Iron Centre ... Read More(Flexello Brand). The wheel has a tread width of 102mm and a 118mm hub length (the distance through the central bore). The central bore contains 31.8mm (1 1/4 inch) Taper Roller Bearings for lower rolling resistance and making the wheel suitable for power towing. The Load Capacity is 4,080Kg. - In Stock
Expander Fitting, Square Tube, 24mm to 27mm (WR4724/27)
£3.22Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
100mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSVH100NY2BSWB)
£10.41100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor with Swivel and Wheel Brake. This castor has Nylon Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - Out of Stock - On the Way
Stainless Steel Fixed Castor, 200kg Capacity | 125mm Nylon Wheel, Plain Bore (IFNY12510030)
Original price was: £18.52.£9.80Current price is: £9.80.Sale!125mm Top Plate Fixed Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 200kg - In Stock
75mm Stainless Steel Swivel Castor, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATS075TPR)
£8.94This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/hThe grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors.Download Series Data Sheet here - In Stock
100mm Stainless Steel Fixed Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MFS100PNB)
£19.80100mm Top Plate Fixed Castor (Stainless Steel Cast... Read Moreor) with 80x60mm Bolt Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
Castor Wheel 125mm | Nylon, 150kg, 8mm Ball bearing (7335090)
£4.35125mm White Nylon Wheel Castor wheel with Grey Thr... Read Moreead Guards and a single ball bearing held in place by two integral thread guards. The load capacity of this caster wheel is 150kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Tread Width: 35mm
- Hub Length: 45mm (Including the Thread Guards)
- Bore Size: 8mm
- Bearing Type: Single Ball Bearing
- Wheel Hardness: Shore D 75
- High Load Capacity
- Wear Resistant
- Low Rolling Resistance
- Extremely resistance to water, salts, greases, acids and alkalis
- Out of Stock - On the Way
150mm Fixed Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KFMG150PCB)
£56.98150mm Top Plate Fixed Castor (Fabricated Steel) wi... Read Moreth a Polyurethane Tyre wheel with a Cast Iron Centre and Ball Bearings. Load Capacity = 500kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
- In Stock
Castor Wheel 75mm | Cast Iron, 170kg, 12mm Plain Bore (WCI3M12)
£8.8175mm Cast Iron Wheel with 12mm smooth Plain Bore. ... Read MoreThis Flexello branded castor wheel has a tread width of 32mm and the wheel's hub length is 40mm. Load Capacity = 170kg - In Stock
80mm Fixed Castor, 130kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MFV080PN1BC)
£7.0680mm Red Polyurethane Tyre Wheel on a Nylon Centre... Read More with a roller bearing fitted into a pressed steel Fixed castor bracket. The Fixed Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket and you have a castor that is a great choice for the wide range of industrial and domestic applications.
