- Display 15 Products per page
Out of Stock - On the Way125mm Swivel Castor with Brake, 150kg Capacity | Nylon Wheel, Plain Bore (1322010)
£12.39125mm Top Plate Swivel Castor and Swivel & ... Read MoreWheel Brake (Pressed Steel) with 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
125mm Swivel and Brake Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSVH125RN2BSWB)
£16.51125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor with Swivel and Wheel Brake. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
50mm Swivel and Brake Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBHBR)
£3.32This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor with brake (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
Rubber Tyre Trolley/Sack Truck Wheel 200mm | Black Rubber Tyre / Red Polypropylene (Plastic) Centre, 200kg, 25.4mm Roller Bearing (EPR200R25.4/51RED)
£7.28200mm Black Solid Rubber Tyre on a Red Polypropyle... Read Morene (Plastic) Centre with a 1 inch (25.4mm) Roller Bearing. The Load Capacity of this wheel is 200kg using manual propulsion at 4 km/h (walking speed). The roller bearing consists of steel rollers housed in a plastic cage that roll on the axle to reduce the rolling resistance even under load.This 8 inch (20 centimetre) diameter wheel (from outside edge of the black rubber tyre) is suitable for use as a trolley or cart wheel, sack truck wheel, castor wheel or anywhere where the axle the wheel is being fitted onto has a 24.5mm (1 Inch) diameter. - In Stock
100mm Swivel Castor, 300kg Capacity | Cast Iron Wheel, Roller Bearing (KSMG100CIB)
£28.41100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. The wheel is a solid Cast Iron Wheel with a Needle Roller Bearing. Load Capacity = 300kg using manual propulsion at 4km/h (walking speed).Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Roller Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Cast iron castor wheels have a very hard tread making them the easiest of wheels to move (low tractive resistance). They have a very high load capacity, extremely wear resistant and not affected by swarf or aggressive materials.
- In Stock
125mm Fixed Castor, 100kg Capacity | Rubber Tyre Wheel, Roller Bearing (MFV125GRP1B)
£7.73125mm Top Plate Fixed Castor (Pressed Steel) with ... Read More80x60 Hole Centres. Grey Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 100kg - In Stock
Guide Roller, 40mm X 15mm, Polyurethane Tyre, 10mm Ball Bearing, 100kg (KGR4015PTSTB10)
£38.0940mm Guide Roller with a 15mm Tread Width with a s... Read Moreingle 10mm shielded ball bearing (6000ZZ). The wheel's tyre is polyurethane (91 Shore A Hardness) on a steel centre with a Load Capacity of 100kg. - In Stock
Designer Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 1200kg, 30mm Plain Bore Keywayed (25045PTU30)
£185.96250mm Polyurethane (Extra Heavy Duty) Tyre / Cast ... Read MoreIron Centre Wheel with 30mm Keyway Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where this industrial wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (Flexello 461RNB)
£25.48100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel fitted with a Roller Bearing. Load Capacity = 160kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating and has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. The roller bearing consists of steel rollers in a plastic cage that minimise rolling resistance even under heavy loads.
- In Stock
Rail Wheel 150mm | Parallel Tread, 1000kg, 20mm Ball Bearing (150CF2H)
£57.81150mm Revvo Cast Iron Flanged wheel with 90parallel tread and 20mm Ball Bearings. Revvo Cast Iron wheels are manufactured from close grain casting sometime described as 'semi steel' to BSEN1561, This enables a very high load capacity of 1,000kg per wheel.The Hub Length (distance through the central bore) is 57mm and the tread width is 35mm with a flange groove of 14mm. The wheel is finished with a clear resin shellac coating. Ideal for rail use.Revvo Cast iron Flanged wheels share the same characteristics of other cast iron wheels combining strength and shock resistance with long life and economy. They have a very low tractive resistance are are a great choice when ease of movement is required. - Out of Stock - On the Way
Swivel Castor With Brake (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel (K2BT300PC2BD)
£988.99300mm Twin Wheel Extra Heavy Duty Swivel Castor wi... Read Moreth Brake and Directional Lock. The Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg.The Braking Mechanism On This Product Is A Wheel Brake Only. This Means That When The Brake Is Applied The Brake acts only to stop the rotation of the Castor Wheels. The castor's Swivel head is free to Rotate.The Directional lock fixes the swivel head in one position stopping the swivel head from rotating while allowing the wheel to rotate and for the castor to travel in a fixed direction. - In Stock
75mm Swivel and Brake Castor, 75kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHB075TPR)
£7.76This apparatu... Read Mores / institutional castor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre fitted into a 10mm Single Bolt Hole Swivel Castor with a total stop brake (Pressed Steel Frame) with a double ball race in the swivel head. A total stop brake brakes both the swivel head and the wheel. The load capacity of this castor is 70kg using manual propulsion at 4km/h
This castor is fitted with a grey Thermoplastic Rubber Tyre Wheel that will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
Designer Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 2000kg, 30mm Plain Bore (25070PT030)
£244.09250mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Pallet Roller, 82mm X 80mm, Polyurethane Tyre, 20mm Ball Bearing, 700kg (KR8280PTB)
£28.3582mm X 80mm Pallet Roller with a polyurethane tyre... Read More (92 Shore A Hardness) on a steel centre. 20mm Ball Bearing and a Load Capacity of 700kg (working speed 4 km/h).This pallet roller is abrasion resistant with a low rolling resistance. - In Stock
Steel Pallet Feet 127mm x 127mm (KPF1A)
£4.07Pallet Feet: 127mm X 127mm Self-C... Read Moreolour Steel Pallet Feet (2.34 plate thickness) and 56x56mm top to suit max. 50mm Square Post.
