- Display 15 Products per page
DiscontinuedCastor Wheel 150mm | Cast Iron, 1000kg, 20mm Plain Bore, 150CI05 (150CI05)
£19.98150mm Cast Iron Wheel (Revvo Brand) 45mm Tread Wid... Read Moreth, 60mm Hub Length and 20mm Smooth Plain Bore. Load Capacity = 1000kgThese castor wheels are able to withstand high temperatures and combine strength and shock resistance with long life and economy, The have very low tractive resistance and are first choice where ease of movement is required. Cast Iron can cause floor wear and noise. Although protected by a clear lacquer finish, like all ferrous metals, they will eventually rust.The Revvo CI Series cast iron wheels are close grained casting of grey iron material sometimes described as semi-steel.This item has been discontinued. Please click here to see our WCI6M20 for the closest alternative.- In Stock
Puncture Proof Wheel 370mm | Puncture Proof Tyre / Red Polypropylene Centre, 170kg, 25.4mm Plain Bore (PP370RP1R)
£43.64370mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Rib Tread on a Red Polypropylene Centre. This Wheel has a 25.4mm Plain Bore, 100mm Tread Width, 66mm Hub Length, and 170kg Load Capacity - In Stock
Castor Wheel 150mm | Cast Iron, 1180kg, 25.4mm Plain Bore (WCI6L)
£35.77150mm Flexello Cast Iron Castor Wheel with 25.4mm ... Read More(1 Inch) Plain Bore, 45mm Tread Width and 60mm Hub Length (the distance through the central Bore). The load capacity of this caster wheel is 1180kg.Cast Iron Castor Wheels are a great choice for many rough service applications because they are strong, shock resistant and have a long working life. They have a very low tractive resistance which aids in the ease of movement and are not susceptible to picking up swarf and other floor debris which may hamper the performance of other Castor Wheel materials. - In Stock
Headed Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm.The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length).The total length of the product is 15mm. - In Stock
Pneumatic Wheel 260mm | Pneumatic Tyre / Red Polypropylene Centre, 120kg, 25.4mm Roller Bearing (PWP260RB1)
£21.65260mm Black Pneumatic Rubber Tyre on a Red Polypro... Read Morepylene Centre Wheel (3.00-4). 4-Ply rating tyre with Diamond tread. This wheel has a 73mm Hub Length and 1 inch (25.4mm) Roller Bearing with a Load Capacity of 120kg using manual propulsion at 4km/h (walking speed).Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impacts from bumpy surfaces. - In Stock
Pneumatic Wheel 400mm | Pneumatic Tyre / Metal Centre, 136kg, 25.4mm Roller Bearing (BWR400-825.4/634411)
£45.57400mm (16 inch) Pneumatic Wheel (4.80/4.00-8) with... Read More block pattern tread on a Red Painted Metal Centre. The wheel has a 1 Inch (25.4mm) Roller Bearing and the load capacity is 136kg at 4km/h using manual propulsion- This wheel is sized 4.80/4.00-8 with a 4 ply tyre thickness making it a strong medium duty wheel.
- Though it has a 16" wheel diameter, it is also commonly referred to as a 400mm wheel.
- Suitable for a 1" axle shaft and can be use as a wheelbarrow wheel.
- If it is being used as a wheelbarrow replacement wheel, please check the hub length (distance through the central bearing bore) and the diameter of the bearing bore to ensure this wheel is compatible.
- In Stock
200mm Stainless Steel Fixed Castor, 300kg Capacity | Nylon Wheel, Plain Bore (MFS200NY)
£38.68200mm Top Plate Fixed Castor (Stainless Steel Cast... Read Moreor) with 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 300kg - In Stock
100mm Grey Electro-Conductive Thermoplastic Wheel, 80kg (100TPREC378)
£6.16100mm grey electroconductive thermoplastic polyure... Read Morethane wheel with 8mm precision ball bearing complete with thread guards. The load capacity of the wheel is 80kg and the tread width is 30mm.The tread has a 95 Shore A hardness and the hub length (the distance through the castor wheel's central bore) is 37mm. These castor wheels have an electric resistivity of 100.000 Ohm. - In Stock
Designer Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 1200kg, 30mm Plain Bore Keywayed (25045PTU30)
£185.96250mm Polyurethane (Extra Heavy Duty) Tyre / Cast ... Read MoreIron Centre Wheel with 30mm Keyway Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where this industrial wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 75mm | Nylon, 60kg, 10mm Plain Bore (075NY02)
£4.3775mm White Nylon Wheel with a 24mm Hub Length and ... Read Morea 10mm Plain Bore. Load Capacity = 60kg - In Stock
100mm Swivel Castor with Brake, 250kg Capacity | Nylon Wheel, Roller Bearing (422NYBTSB)
£31.14100mm Swivel Castor with Swivel & Wheel Brake ... Read More(Pressed Steel frame). The top plate has 80x60mm Bolt Hole Centres and 128mm Overall Height. The White Nylon Wheel has a tread width of 32mm and contains a Roller Bearing. Load Capacity = 250kgNylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most popular castor wheel material.The roller bearing in the hub (central part of the wheel) consists of steel rollers within an impact resistant plastic cage. These rollers rotate between the axle tube and the wheel hub which reduces the rolling resistance making it easy to move even under heavy loads. Roller bearings are rugged, robust and largely maintenance-free. - In Stock
Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 400kg, 20mm Ball bearing (AW125PCB)
£37.66125mm Caster Wheel with a Yellow Polyurethane Tyre... Read More (91 Shore A) on a Cast Iron Centre. It has two quality 20mm Shielded Ball bearings and a Load Capacity of 400kg.This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions. - In Stock
40mm Furniture Swivel Castor With Brake, 40kg Capacity | Polypropylene Wheel (TW40TSB)
£1.4640mm Twin Wheel Furniture Swivel Castor with brake... Read More and M8 x 15mm Threaded Stem. Black Polypropylene Wheels with a load Capacity of 40kg.This castor is an excellent choice for furniture, display equipment / stands and other light duty indoor applications. - In Stock
40mm Furniture Swivel Castor, 40kg Capacity | Polypropylene Wheel (TW42SS)
£2.2640mm Twin Wheel Stem & Socket Fitting Furnitur... Read Moree Castor. Black Polypropylene Tyres. - Out of Stock - On the Way
125mm Swivel Castor with Brake, 1500kg Capacity | Cast Nylon Wheel, Ball bearing (GXT125BSFMCD)
Original price was: £467.61.£293.68Current price is: £293.68.Sale!125mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with wheel brake and 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
