- Display 15 Products per page
In StockM6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
- In Stock
150mm Fixed Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing, 189mm Height (KF150PCB500)
£56.63150mm Top Plate Fixed Castor (Pressed Steel) with ... Read More105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
Pallet Roller, 82mm X 80mm, Nylon, 20mm Ball Bearing, 680kg (KR8280NYB)
£18.2582mm x 80mm White Nylon Pallet Roller with 20mm B... Read Moreall Bearing. Load Capacity = 680kg - In Stock
250mm Swivel Castor, 1150kg Capacity | Cast Iron Wheel, Ball bearing (HKS25025441)
£123.87250mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1150kg - In Stock
160mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSK160RN2B)
£37.26160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Black Nylon Centre Wheel with Ball Bearings. Load Capacity = 300kg.Blue elastic rubber tyres are gentle on floors and non-marking. They are a popular choice when a castor with a rubber tyre is needed but the weight to be carried is heavier than what a castor with a standard rubber tyre wheel can hold. - In Stock
125mm Swivel Castor, 85kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321053)
£9.98125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Grey Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 85kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100F-105X80)
Original price was: £57.04.£53.50Current price is: £53.50.Sale!75mm Foot Master Levelling Castor with an Ivory Co... Read Morelour powder coating finish. This product has a 4-hole top plate with 105mm x 80mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
200mm Fixed Castor, 400kg Capacity | Rubber Tyre Wheel, Roller Bearing (829RNB)
£57.59200mm Top Plate Fixed Castor (Pressed Steel) with ... Read More105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with Roller Bearing. Load Capacity = 400kg using manual propulsion at 4km/h. - In Stock
Designer Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 20mm Ball Bearing (10040PT220)
£105.70100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 20mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Fixed Castor, 1000kg Capacity | Cast Iron Wheel, Ball bearing (HKF20020441)
£58.25200mm Top Plate Fixed Castor (Fabricated Steel) wi... Read Moreth 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1000kg - In Stock
100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH100PT1H)
£108.74100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 340kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
125mm Fabricated Steel Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG125CRPCB)
£55.12125mm Swivel Castor (Fabricated Steel) with 105x80... Read Moremm Fixing Bolt Hole Centres. The wheel has a Crown Tread Polyurethane Tyred on Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 350kgKey Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Tread Hardness: 92 +/-3 Shore A
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Crowned Polyurethane Tread for easy manoeuvrability.
- In Stock
Pneumatic Wheel 300mm | Pneumatic Tyre / Red Polypropylene Centre, 150kg, 20mm Plain Bore (PWP300PB20)
£28.22300mm Black Pneumatic Rubber Tyre / Red Polypropyl... Read Moreene Centre Wheel (4.00-4). This pneumatic castor wheel has a 4 Ply rating tyre with Diamond tread, 73mm Hub Length and 20mm Plain Bore. Load Capacity = 150kg.Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impacts from bumpy surfaces. - In Stock
150mm Stainless Steel Fixed Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MFS150PNB)
£33.21150mm Top Plate Fixed Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor with Brake, 250kg Capacity | Polyurethane Tyre Wheel, Plain Bore (461PNBR)
£31.60100mm Top Plate Swivel Castor with Footbrake (F... Read Morelexello 61 Series) with 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 250kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
