- Display 15 Products per page
Out of Stock - On the Way125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (1321088)
£14.33125mm Bolt Hole Swivel Castor (Pressed Steel) w... Read Moreith 10mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This product has been discontinued. The closest alternative is our 1321768 which is the same bracket and wheel but with a roller bearing rather than a ball bearing.
- In Stock
Puncture Proof Wheel 400mm | Puncture Proof Tyre / Red Steel Centre, 200kg, 25mm Roller Bearing (PP400RSB25D)
£92.25400mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) on a Red Steel Centre. This size wheel is often referred to as a 16" or 16 Inch Wheel and has a 25mm Roller Bearing, 100mm Tread Width, 65mm Hub Length, and 200kg Load Capacity - In Stock
Pneumatic Wheel 360mm | Pneumatic Tyre / Red Polypropylene Centre, 125kg, 20mm Roller Bearing (PWP360RB20)
£28.56360mm Black Pneumatic Rubber Tyre / Red Polypropyl... Read Moreene Centre Wheel (3.50-8). This pneumatic castor wheel has a 4 Ply rating tyre with Rib tread, 63mm Hub Length and 20mm Roller Bearing. Load Capacity = 125kg.Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impact loads from bad floors. - In Stock
100mm Swivel Castor with Brake, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV100PN2BSWB)
£10.23100mm Red Polyurethane Tyre Wheel on a Nylon Centt... Read Morere with a ball bearing fitted into a pressed steel swivel and brake castor bracket. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.</p> - In Stock
Castor Wheel 100mm | Nylon, 300kg, 15mm Ball bearing (AW100NYBJ40)
£11.87100mm White Nylon Castor Wheel with 15mm Ball Jour... Read Morenal, 40mm Tread width and 40mm Hub Length (the distance through the central bore). This wheel is rated to 300kg - In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Roller Bearing (150PT15)
£62.74150mm Polyurethane Tyre on a Cast Iron Centre Whee... Read Morel (Revvo) with a 20mm Roller Bearing, 38mm Tread Width, 60mm Hub (the distance through the central bore) and a 92-97 shore A hardness. This castor wheel's Load Capacity is 730kg using manual propulsion and 4 km/h.Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move. - In Stock
Puncture Proof Wheelbarrow Wheel 355mm | Black Rubber tyre / Steel Centre, 16mm / 19mm bore
Original price was: £44.13.£30.89Current price is: £30.89.Sale!355mm (14") diameter puncture proof wheelbarrow wh... Read Moreeel with a White Painted Steel centre (3.50-8). This wheel suits either 16mm (5/8") or 19mm (3/4") axles and is sold with spacers to vary the hub wheel's hub length (the distance through the central bore). With a 180kg load capacity it is suitable for heavy duty applications.This flat-free universal replacement wheelbarrow wheel has a rib tread and a 75mm Tread Width. It has a special foam filled tyre that has the same cushioning and bounce as a typical pneumatic wheel. As the name suggests, it has the added benefit of not being susceptible to punctures from nails and other sharp objects.Changing the bore size:
The hub of this wheel arrives to you fitted with a 16mm (5/8" bearing). This can be removed and replaced with 19mm (3/4" bushes) wheel bushes if needed. The 19mm bushings are included in the kit.To change the bore size simply remove the existing bearings by gently prising both out with a screwdriver and hammer. To prevent damaging the new bushings when knocking them in gently with a hammer, it is recommended that a piece of wood is placed over the bearing:The wheel has a 75mm hub (the distance through the central bore). This can be extended to suit your wheelbarrow by the use of the spacers supplied (see image below for details):When replacing your wheelbarrow's front wheel, it is advised that you remove the wheel from the wheelbarrow and check the shaft size and the hub length (the distance through the central bore) before purchasing. If you have any doubts, please do not hesitate to phone or send us an email for assistance. - In Stock
Castor Wheel 125mm | Nylon, 150kg, 8mm Ball bearing (7335090)
£4.35125mm White Nylon Wheel Castor wheel with Grey Thr... Read Moreead Guards and a single ball bearing held in place by two integral thread guards. The load capacity of this caster wheel is 150kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Tread Width: 35mm
- Hub Length: 45mm (Including the Thread Guards)
- Bore Size: 8mm
- Bearing Type: Single Ball Bearing
- Wheel Hardness: Shore D 75
- High Load Capacity
- Wear Resistant
- Low Rolling Resistance
- Extremely resistance to water, salts, greases, acids and alkalis
- In Stock
High Temperature Wheel 80mm | Phenolic Resin, 100kg, 12mm Plain Bore (BOO0803512)
£10.6380mm High Temperature Wheel made from quality Phen... Read Moreolic Resin suitable for use in temperatures up to +280 Degrees Celsius. It is a hard wheel with low tractive resistance and has a maximum Load Capacity of 100kg and the wheel comes with a smooth 12mm Plain Bore, 35mm Wheel Tread Width and a 45mm Hub Length (the distance through the central bore). - Out of Stock - On the Way
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS125RNB180)
£43.98125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg - In Stock
Adjustable Feet, Tilting, M10 x 50mm Stem, 250kg Load Capacity, 55mm Base (GL55XM10X50T)
£1.69Tilting Adjustable Levelling Feet with M10 x 50mm ... Read MoreStem and 55mm Base Diameter (20mm Base Height). Maximum Tile Angle = 20 Degrees. Load Capacity = 250kg - In Stock
125mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH125NY1BSWB)
£11.52125mm Single Bolt Hole (12mm) Swivel Castor with S... Read Morewivel and Wheel Brake (Pressed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK100PC2B)
£33.40100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
100mm Swivel Castor | Polyurethane Tyre Wheel, Roller Bearing, 180kg Capacity (MSZ100PN1B)
£12.82100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 180kg using manual propulsion at 4km/h (walking speed)Key Specification:- Top Plate Size: 105x80mm
- Bolt Hole Centres: 80/76X60mm
- Bolt Hole Size: 9mm (to suit M8 Fixing Bolts)
- Overall Height: 125mm
- Offset: 36mm
- Swivel Radius: 86mm
- Tread width: 34mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
- In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1000kg, 20mm Ball Bearing (20020241)
£65.43200mm Polyurethane Tyre on a Cast Iron Centre Cast... Read Moreor Wheel with 20mm Ball Bearings, 50mm Tread Width and 60mm Hub Length (the distance through the bore). Load Capacity = 1000kgThe polyurethane used as the tyre is a high quality polyurethane that has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
