- Display 15 Products per page
In Stock50mm Swivel Castor with Brake, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV050RPBR)
£3.4050mm Swivel with Brake Castor with a Grey Rubber T... Read Moreyre Wheel on a nylon centre. This castor has a top plate with 36x36mm fixing bolt hole centres which suit a 6mm Bolt. The load capacity of this castor is 50kg using manual propulsion at 4km/hThis popular general, light duty all purpose castor has a a grey rubber tyre wheel that will not mark or damage the floor. It is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed.- In Stock
200mm Fixed Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (KF200NYBJ800)
£61.60200mm Fixed Castor with a 135mm x 110mm Top Plate ... Read Moreand 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Out of Stock - On the Way
Swivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2BD)
£619.41250mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor Fitted with A Directional Lock To Lock Swivel Head In A Fixed Direction. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint.
This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance.
The Castor Has A 2800kg Load Rating At 4Km/H
- In Stock
V Grooved Wheel 200mm | V Grooved Cast Iron, 1000kg, 25mm Roller Bearing (200CV1H)
£94.97200mm V-Groove Cast Iron Wheel (Genuine Revvo bran... Read Mored) with a clear resin shellac finish and a 25mm Roller Bearing. The wheel's load capacity is 1,000kg and is ideal for use on inverted angle iron rail. - In Stock
160mm Swivel Castor, 450kg Capacity | Nylon Wheel, Ball Bearing (KSMG160NYB)
£38.86160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 450kg - In Stock
Swivel Castor (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST300PC2B)
£770.74300mm Twin Wheel Extra Heavy Duty Swivel Castor. T... Read Morehe Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg. - In Stock
125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Ball Bearing, (KSMG125EAB)
£38.31125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith with 105x80mm Fixing Bolt Hole Centres. This castor is fitted with a Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 250kg using manual propulsion at 4km/h (walking speed).Key Specifications & Features- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Load Capacity: 250kg (manual propulsion at 4km/h)
- Elastic rubber tyre castor wheels have a higher load capacity and lower rolling resistance (easier to get moving) than normal rubber tyre. They have a high resistance to wear and offer excellent running and operating comfort.
- In Stock
100mm Swivel Castor, 80kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV100RPBH)
£6.10100mm Grey Rubber Tyre wheel with a polypropyle... Read Morene centre fitted into a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a grey rubber tyre that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
125mm Swivel Castor with Brake, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSK125RN1BBR)
£23.97125mm Top Plate Swivel Castor with a Total Stop Br... Read Moreake (Pressed Steel) and 80x60mm Bolt Hole Centres. The overall height of the castor is 157mm and the Blue Elastic Rubber Tyre with a Nylon Centre Wheel contains a Roller Bearing and has a 40m Tread Width. Load Capacity = 250kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.Blue elastic rubber tyres provide the benefits of a rubber tyre wheel such as being gentle on floors and absorbing fine vibrations but they can hold more weight and are non-marking. They are a great solution if you need a rubber tyre wheel but the load being carried is too much for a castor with a standard rubber tyre wheel. - In Stock
125mm Swivel Castor with Brake, 170kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS125UERSWBBLACK)
£22.07125mm Top Plate Swivel Castor with Brake (Pressed ... Read MoreSteel) with 80X60mm Hole Centres.Black Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 170kg - Out of Stock - On the Way
250mm Swivel Castor with Brake, 1150kg Capacity | Cast Iron Wheel, Ball bearing (HKB25025441)
£157.66250mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1150kg - In Stock
Adjustable Feet, Rigid, M8 x 25mm Stem, 250kg Load Capacity, 30mm Base (GL30XM8X25R)
£0.74Rigid Adjustable Levelling Feet with M8 x 25mm Ste... Read Morem and 30mm Base Diameter (16mm Base Height). Load Capacity = 250kg - In Stock
High Temperature Wheel 100mm | Phenolic Resin, 125kg, 12mm Plain Bore (KW100HT)
£9.86100mm High Temperature Phenolic Resin Wheel with 1... Read More2mm smooth plain bore. Suitable for high temperatures to +280 Degree Celsius. Load Capacity = 125kg - In Stock
Steel Wheel Tube: 20mm OD x 12mm ID x 59mm Len (TUBE205912)
£2.02Steel wheel tube to reduce a 20mm bore to 12mm. Th... Read Moreis steel tube is 59mm Long and has a 20mm Outside Diameter with an internal diameter of 12mm. - In Stock
40mm Furniture Swivel Castor With Brake, 40kg Capacity | Polypropylene Wheel (TW42SSB)
£2.4940mm Twin Wheel Braked Stem & Socket Fitting F... Read Moreurniture Castor. Black Polypropylene Tyres.
