- Display 15 Products per page
Out of Stock - On the Way125mm Swivel Castor with Brake, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (1322038)
£17.90125mm Top Plate Swivel Castor and Swivel & ... Read MoreWheel Brake (Pressed Steel) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
160mm Fixed Castor, 500kg Capacity | Nylon Wheel, Ball, Bearing (KF160NYBJ500)
£43.22160mm Fixed Castor (Heavy Duty Pressed Steel) with... Read More a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 500kg - In Stock
Adjustable Feet, Tilting, M10 x 37.5mm Stem, 75kg Load Capacity (GL32XM10X37.5T)
£1.86Tilting Adjustable Levelling Feet with M10 x 37.5m... Read Morem Stem and 32mm Base Diameter (20mm Base Height). Maximum Tile Angle = 20 Degrees. Load Capacity = 75kg - In Stock
200mm Fixed Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (KF200NYBJ800)
£61.60200mm Fixed Castor with a 135mm x 110mm Top Plate ... Read Moreand 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- In Stock
100mm Fixed Castor, 160kg Capacity | Rubber Tyre Wheel, Ball Bearing (MFV100RN2B)
£8.90100mm Blue Elastic Rubber Tyre on a nylon centr... Read Moree wheel with a ball bearing fitted into a pressed steel Fixed castor bracket. The Fixed Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres. It is also non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket makes this castors a great performer and one of our most popular products.</p>
This castor is often used on flight cases as well as in many medical, industrial and domestic applications.<br></p>
- In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel with Single Ball Bearing (MSVH100RN2B)
£10.35100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel (Shore A 65) on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h.Key Specification:- Bolt Hole Size: 13mm (to suit 12mm Fixing Bolt)
- Overall Height: 127mm
- Offset: 40mm
- Swivel Radius: 90mm
- Tread width: 35mm
- Bearing Type: Single Ball Bearing
- Tyre Hardness: Shore A 65
- High Load Capacity
- Low Rolling Resistance
- Reduce Vibration
- Low noise Operation
- In Stock
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 30mm Plain Bore (15050PT030)
£106.15150mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
V Grooved Wheel 200mm | V Grooved Cast Iron, 1000kg, 20mm Ball Bearing (200CV2H)
£126.99200mm V-Groove Cast Iron Wheel (Genuine Revvo bran... Read Mored) with a clear resin shellac finish and a 20mm Ball Bearing. The wheel's load capacity is 1,000kg and is ideal for use on inverted angle iron rail. - In Stock
Castor Wheel 150mm | Rubber Tyre / Cast Iron, 400kg, 20mm Ball Bearing (15020341)
£31.29150mm Castor Wheel with Black Rubber Tyre on a Cas... Read Moret Iron. This wheel has 20mm Ball Bearings and a load capacity of 400kg using manual propulsion at 4km/h. - In Stock
35mm Compact Braked Castor, 100kg Capacity | 35mm Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBR)
£12.8535mm Low Level swivel with brake castor with 60x60... Read Moremm Top Plate and 48/38x48/38mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 52.5mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 400kg, 20mm Ball bearing (AW125PCB)
£37.66125mm Caster Wheel with a Yellow Polyurethane Tyre... Read More (91 Shore A) on a Cast Iron Centre. It has two quality 20mm Shielded Ball bearings and a Load Capacity of 400kg.This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions. - In Stock
V Grooved Wheel 200mm | V Grooved Cast Iron, 1000kg, 25mm Roller Bearing (200CV1H)
£94.97200mm V-Groove Cast Iron Wheel (Genuine Revvo bran... Read Mored) with a clear resin shellac finish and a 25mm Roller Bearing. The wheel's load capacity is 1,000kg and is ideal for use on inverted angle iron rail. - In Stock
Puncture Proof Wheel 300mm | Puncture Proof Tyre / Red Steel Centre, 150kg, 25mm Roller Bearing (PP300RSB25D)
£63.11300mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) on a Red Steel Centre. This Wheel has a 25mm Roller Bearing, 100mm Tread Width, 65mm Hub Length, and 150kg Load Capacity - In Stock
200mm Fixed Castor, 1150kg Capacity | Cast Iron Wheel, Ball Bearing (TFH200CI2H)
£89.10200mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor) and a high quality Cast Iron Wheel with Ball Bearings. Load Capacity = 1150kgThe Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- Power Towable to 6km/h.
- In Stock
Expander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm.
