- Sorry, this product cannot be purchased.
Special Offers
In our special offers section you can find and buy castors and wheels that we currently promoting at a special sale price.These are generally products that we currently have either an excess of stock or new ranges of castors and wheels that we are promoting.
- Display 15 Products per page
-
In Stock
100mm Braked Castor with 21.5mm to 24mm Round Expander Fitting, 100kg Capacity | Rubber Tyre Wheel (194553)
100mm Grey Therm... Read Moreoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with Brake. This castor comes complete with a 21.5mm - 24.5mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 100kg using manual propulsion at 4km/h. The expander fitting is designed to fit into an round hollow tube with an internal diameter of 21.5mm to 24.5mm. This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. -
In Stock
Designer Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 1200kg, 30mm Plain Bore Keywayed (25045PTU30)
250mm Polyurethane (Extra Heavy Duty) Tyre / Cast ... Read MoreIron Centre Wheel with 30mm Keyway Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where this industrial wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock
150mm Shock Absorbing Fixed Castor, 360kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP150ARFMUD)
150mm Shock absorbing (14mm Compression) fixed ... Read Morecastor and Polyurethane Tyred Aluminium Wheel. Load Capacity = 360kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is between 11 and 12mm.
-
In Stock
60mm Twin Wheel Swivel Castor | Polyurethane Tyre Wheel, Ball Bearing, 150kg Capacity (GAJSD60ASFHUD)
60mm Swivel Castor with Dual Polyurethane ... Read MoreTyres for AGVs Maximize your AGV’s performance with our high-quality Automated Guided Vehicle Castors. This 70mm swivel castor features dual (twin) polyurethane tyres mounted on durable aluminium centres, complemented by precision ball bearings. Designed to meet the high demands of AGV applications, this castor ensures smooth, efficient, and reliable operation in industrial settings. The black powder-coated bracket offers superior protection compared to standard zinc-plated frames, enhancing durability in harsh environments. Its low overall height of just 87mm makes it ideal for compact AGV systems, ensuring stability without compromising load capacity—supporting up to 150kg (450kg over 4 castors).Key Specifications:
- Top Plate Fixing: 86x61mm bolt hole spacing with 9mm drilled holes, suited for 8mm bolts.
- Dual Polyurethane Tyres: 95 Shore A hardness for low tractive resistance, smooth and quiet operation.
- Non-Marking Tyres: Protects floors and reduces maintenance costs.
- Robust Swivel Bracket: Double ball race swivel head for enhanced manoeuvrability and durability.
Benefits:
- Optimized for AGVs: Engineered for automated guided vehicles, ensuring reliable, continuous performance.
- Smooth, Quiet Operation: Polyurethane tyres reduce rolling resistance and noise, enhancing efficiency.
- Long-Lasting Durability: Strong aluminium centres and black powder-coated brackets for extended lifespan.
-
In Stock
175mm Swivel Castor with Brake (Powder Coated), 800kg Capacity | Polyurethane Tyre Wheel (KGHP175BSFMUD)
175mm Heavy-duty Swivel & Wheel Brake Castor w... Read Moreith a Powder Coated Pressed Steel Bracket and a 225mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features:- 800kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Total Stop Brake System: Applying the brake pedal simultaneously locks both the wheel and the swivel rotation.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
-
Out of Stock - On the Way
200mm Shock Absorbing Swivel Castor, 450kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP200ASFMUD)
200mm Shock absorbing (15mm Compression) Swivel... Read More castor and Polyurethane Tyred Aluminium Wheel. Load Capacity = 450kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is just over 10mm.
-
In Stock
200mm Shock Absorbing Fixed Castor, 450kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP200ARFMUD)
200mm Shock absorbing (15mm Compression) fixed ... Read Morecastor and Polyurethane Tyred Aluminium Wheel. Load Capacity = 450kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg which is just over 10mm.
-
In Stock
200mm Shock Absorbing Fixed Castor With Brake, 450kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP200BRFMUD)
200mm Shock absorbing (15mm Compression) fixed ... Read Morecastor with Brake and Polyurethane Tyre on an Aluminium Centre Wheel. Load Capacity = 450kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment.
For a typical example, with a trolley or machinery using 4 of these castors please divide the total weight by 3. If the total weight being carried is 500kg then the relevant reading for the compression of the rubber pad on the chart's 'Y' axis is given at 167kg (500kg / 3 = 167kg) along the 'X' axis, which is just over 10mm.
-
In Stock
100mm Fixed Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (MFW100APCB)
100mm Fixed Castor with an extra strong fabricated... Read More (welded) steel bracket. Fixed castors are sometimes referred to as rigid castors. This castor has a top plate measuring 135mm x 110mm and 4 fixing bolt holes with 105x80mm. The Load Capacity is 300kg using manual propulsion at 4 km/h. The wheel has a Polyurethane Tyre bonded onto a Cast Iron Centre with two Ball Bearing for exceptional rolling performance. Key Specifications- Top Plate Dimensions: 135x110mm
- Bolt Hole Centres: 105x80/75mm
- Overall Height: 146mm
- Wheel Material: Polyurethane Tyre on a Cast Iron Centre
- Tread Width: 40mm
- Bearing Type: Ball Bearings
-
In Stock
80mm Stainless Steel Swivel and Brake Castor (Plate), Polyurethane Tyre wheel, Roller Bearing, 150kg (IBPN08014030)
80mm Top Plate Swivel Stainless Steel Castor (Flex... Read Moreello Brand) with Swivel and Wheel Brake. This castor has a 105x85mm top plate with 80x60mm fixing bolt hole centres. The caster wheel has a Polyurethane Tyre on a Nylon Centre with a stainless steel roller bearing. The wheel's tread width is 30mm and the load capacity is 150kg using manual propulsion at 4km/h. -
In Stock
50mm Furniture Castor, 50kg Capacity | Wheel (44-PAIR)
Sold in Pack o... Read Moref 2 with 1 Left Hand castor and 1 Right Hand castor
50mm Shepherd Castor with M8x16mm Threaded Stem. Standard Metal Tread Wheel. Load Capacity = 50kg. This pack of 2 castors comes with 1 Left Hand and 1 Right Hand Ball Type Castor.
These casters should be fitted diagonally opposite each other.
-
In Stock
100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (LSV100NY250)
100mm Top Plate ... Read MoreSwivel Castor with a White Nylon Wheel. The Castors Top Plate measures 102mm x 84mm and is drilled with 80x60mm fixing bolt hole centres. The overall height is128mm. The castor wheel has a tread width of 35mm, a smooth plain bore. The load capacity of this castor is 250kg using manual propulsion at 4km/h The White Nylon wheel is non-marking and won't damage concrete floors making it and ideal castor for most general purpose domestic or industrial castor applications. -
In Stock
650mm Heavy Duty Turntable , 1500kg Load Capacity (650L)
650mm Diameter Turntable for fitting to trailers a... Read Morend agricultural vehicles - The Turntable is supplied un-drilled. Connecting the "A" frame with the trailer chassis they allow a full swivel action at speeds of up to 15 mph and the Axial Load rating is 1500 kg. -
In Stock
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 50mm Plain Bore Keywayed (30075PTU50)
300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 50mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock
100mm Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (MSW100APCBBR)
100mm Top Plate Swivel Castor with Side Mounted Wh... Read Moreeel Brake. The housing is made with an extra strong fabricated (welded) bracket and the top plate has 4 fixing holes with 105x80mm bolt hole centres. The wheel is a Polyurethane Tyre / Cast Iron Centre Wheel running on two Ball Bearings for exceptional rolling performance. This castor has a Load Capacity of 300kg using manual propulsion at 4 km/h (walking speed). Key Specifications- Top Plate Dimensions: 135x110mm
- Bolt Hole Centres: 105x80/75mm
- Overall Height: 146mm
- Offset: 30mm +/- 2mm
- Wheel Material: Polyurethane Tyre on a Cast Iron Centre
- Tread Width: 40mm
- Bearing Type: Ball Bearings
- Brake Style: Wheel Brake: When applied, the wheel is locked but the swivel head can freely rotate.