Nylon / Polypropylene Wheels
Keystone Castors offers a wide range of white nylon / polypropylene wheels for existing castor wheel replacement and for a vast variety of industrial uses. White nylon wheels are a popular choice: relatively inexpensive compared with other hard-tread wheels like cast iron.Hard tread wheels are less likely to pick up floor ...debris and swarf than softer, easily damaged treads. Nylon wheels are available with a Roller Bearing, Ball Bearing or Plain Bore.
Non-marking, non-staining and corrosion-resistant, nylon wheels are lightweight with a high load capacity. They require minimal lubrication and provide very low rolling resistance, causing very little floor damage in most applications.
Nylon wheels are also resistant to oils, fats, alkali, soaps and detergents. However, they are not suitable for use where exposure to concentrated acids is likely. Their operating temperature is between -20 and +80 deg. C, though between -5 and +40 is optimal.
Polypropylene Wheels:
Like Nylon, polypropylene is a thermoplastic synthetic material. Polypropylene wheels share many benefits with nylon but are slightly less durable, and therefore less expensive. Read More
- Display 15 Products per page
In StockCastor Wheel 50mm | Nylon, 54kg, 6mm Plain Bore (WNY20)
£1.2950mm White Nylon Castor Wheel with 6.4mm Plain Bor... Read Moree, 17mm Tread Width and 27mm hub length (the distance through the central bore). The load capacity of this wheel is 54kg- In Stock
Castor Wheel 63mm | Nylon, 122kg, 9mm Plain Bore (WNY25)
£1.7363mm White Nylon caster wheel with 33mm Hub Length... Read More (the distance through the central bore), 22mm Tread Width and a 9.5mm Smooth Plain Bore. Load Capacity = 122kg.Nylon Castor wheels are probably the most commonly used wheel because they offer a high load capacity for the lowest cost. They are also extremely strong, maintenance free, do not damage or mark concrete flooring and they are extremely resistant to water, salts, greases, acids and alkalis. - In Stock
Castor Wheel 75mm | Nylon, 170kg, 12mm Plain Bore (WNY3M12)
£2.5475mm White Nylon Castor Wheel with 12mm Smooth Pla... Read Morein Bore, 40mm Hub Length and 25mm Tread Width. Load Capacity = 170kg. - In Stock
Castor Wheel 100mm | Polypropylene, 125kg, 12mm Plain Bore (KW100ED1240)
£2.78100mm Grey Polypropylene (Plastic) Wheel with 12mm... Read More Smooth Plain Bore. The wheel has a 32mm Tread Width and 40mm Hub Length (the distance through the central Bore) and the load capacity is 125kg using manual propulsion at 4km/h. - In Stock
100mm White Nylon Wheel, 12mm Roller Bearing, 150kg (MVW100NY1B)
Original price was: £6.90.£3.10Current price is: £3.10.Sale!100mm White Nylon Castor Wheel with 12mm Roller Be... Read Morearing, 36mm Tread Width and 40mm Hub Length (the distance through the central bore). The load Load Capacity is 150kg.The 100mm wheel wheel comes with thread guards, an M12x36mm Needle Roller Bearing, a Steel Tube (12mm OD X 8mm ID x 40mm Length) and a 8mm x 59mm Bolt & nut.Without the castor wheel's tube fittings, the plain bore is 20mm. - In Stock
Castor Wheel 125mm | Nylon, 150kg, 8mm Ball bearing (7335090)
£4.35125mm White Nylon Wheel Castor wheel with Grey Thr... Read Moreead Guards and a single ball bearing held in place by two integral thread guards. The load capacity of this caster wheel is 150kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Tread Width: 35mm
- Hub Length: 45mm (Including the Thread Guards)
- Bore Size: 8mm
- Bearing Type: Single Ball Bearing
- Wheel Hardness: Shore D 75
- High Load Capacity
- Wear Resistant
- Low Rolling Resistance
- Extremely resistance to water, salts, greases, acids and alkalis
- In Stock
Castor Wheel 75mm | Nylon, 60kg, 10mm Plain Bore (075NY02)
£4.3775mm White Nylon Wheel with a 24mm Hub Length and ... Read Morea 10mm Plain Bore. Load Capacity = 60kg - In Stock
Castor Wheel 75mm | Nylon, 160kg, 10mm Plain Bore (075NY03)
£4.3775mm White Nylon Wheel with a 30mm Hub Length and ... Read Morea 10mm Plain Bore. Load Capacity = 160kg - In Stock
Castor Wheel 125mm | Nylon, 300kg, 15mm Roller bearing (AW125NYB)
Original price was: £9.25.£4.63Current price is: £4.63.Sale!125mm Nylon Castor Wheel with 50mm Hub Length (Dis... Read Moretance through the Central Bore) and 15mm Roller Bearing. Load Capacity = 300kg - In Stock
Castor Wheel 100mm | Nylon, 250kg, 12mm Plain Bore (KW100NY1245)
£5.08100mm White Nylon Wheel with 12mm Plain Bore, 32mm... Read More Tread Width and 45mm hub length. Load Capacity = 250kg (using manual propulsion at 4km/h) - In Stock
Castor Wheel 100mm | Nylon, 200kg, 15mm Plain Bore (KW100NY1547)
£5.12100mm Nylon Wheel with 15mm Plain Bore. Load Capacity = 200kg - In Stock
Castor Wheel 125mm | Nylon, 350kg, 15mm Plain Bore (KW125NY1547)
£5.60125mm Nylon Wheel with 15mm Plain Bore. Load Capacity = 250kg - In Stock
Castor Wheel 100mm | Nylon, 270kg, 15mm Plain Bore (WNY4M15)
£5.65100mm White Nylon Castor Wheel with 15mm Bore and ... Read Morea Load Capacity of 270kg.Key Specifications:- Wheel Diameter: 100mm
- Bore Size: 15mm
- Tread Width: 32mm
- Hub Length: 48mm (the distance through the central bore)
- In Stock
Castor Wheel 100mm | Nylon, 350kg, 15mm Plain Bore (KW100NY350)
£6.02100mm Nylon Wheel with 15mm Plain Bore. Load Capacity = 350kg - In Stock
Castor Wheel 125mm | Nylon, 200kg, 12mm Plain Bore (DW125NY4012)
£6.20125mm Nylon Wheel With 12mm Smooth Plain Bore and ... Read More40mm Tread Width. The distance through the central bore (Hub Length) is 45mm. Load Capacity = 200kg
