Nylon / Polypropylene Wheels
Keystone Castors offers a wide range of white nylon / polypropylene wheels for existing castor wheel replacement and for a vast variety of industrial uses. White nylon wheels are a popular choice: relatively inexpensive compared with other hard-tread wheels like cast iron.Hard tread wheels are less likely to pick up floor ...debris and swarf than softer, easily damaged treads. Nylon wheels are available with a Roller Bearing, Ball Bearing or Plain Bore.
Non-marking, non-staining and corrosion-resistant, nylon wheels are lightweight with a high load capacity. They require minimal lubrication and provide very low rolling resistance, causing very little floor damage in most applications.
Nylon wheels are also resistant to oils, fats, alkali, soaps and detergents. However, they are not suitable for use where exposure to concentrated acids is likely. Their operating temperature is between -20 and +80 deg. C, though between -5 and +40 is optimal.
Polypropylene Wheels:
Like Nylon, polypropylene is a thermoplastic synthetic material. Polypropylene wheels share many benefits with nylon but are slightly less durable, and therefore less expensive. Read More
- Display 15 Products per page
In StockCastor Wheel 125mm | Nylon, 270kg, 12mm Plain Bore (125NY04)
£12.32125mm White Nylon Wheel With 12mm Plain Bo... Read Morere and 45mm Hub Length (the distance through the central bore). The load capacity of this wheel is 270kg using manual propulsion at 4km/h- In Stock
Castor Wheel 125mm | Nylon, 400kg, 20mm Ball bearing (AW125NYBJ49)
£15.95125mm Nylon Wheel with 20mm Ball Bearing. Load Capacity = 400kg - In Stock
Castor Wheel 125mm | Nylon, 150kg, 8mm Ball bearing (7335090)
£4.35125mm White Nylon Wheel Castor wheel with Grey Thr... Read Moreead Guards and a single ball bearing held in place by two integral thread guards. The load capacity of this caster wheel is 150kg using manual propulsion at 4km/h (walking speed)Key Specifications:- Tread Width: 35mm
- Hub Length: 45mm (Including the Thread Guards)
- Bore Size: 8mm
- Bearing Type: Single Ball Bearing
- Wheel Hardness: Shore D 75
- High Load Capacity
- Wear Resistant
- Low Rolling Resistance
- Extremely resistance to water, salts, greases, acids and alkalis
- In Stock
150mm White Nylon Wheel, 20mm Ball Bearing, 750kg (HPWH150NY2)
£43.38150mm White Nylon Caster Wheel with a 45mm Tread W... Read Moreidth, 58mm Bore (the distance through the central hole) and 20mm Ball Bearings. Load Capacity = 750kg - In Stock
Castor Wheel 100mm | Nylon, 250kg, 12mm Plain Bore (KW100NY1245)
£5.08100mm White Nylon Wheel with 12mm Plain Bore, 32mm... Read More Tread Width and 45mm hub length. Load Capacity = 250kg (using manual propulsion at 4km/h) - In Stock
100mm White Nylon Wheel, 20mm Plain Bore, 150kg (MVW100NY0B)
£6.89100mm Nylon Castor Wheel with 20mm Smooth Plain Bo... Read Morere, 36mm Tread Width and 40mm Hub Length (the distance through the central bore). The load Load Capacity is 150kg. - In Stock
Castor Wheel 75mm | Nylon, 160kg, 10mm Plain Bore (075NY03)
£4.3775mm White Nylon Wheel with a 30mm Hub Length and ... Read Morea 10mm Plain Bore. Load Capacity = 160kg - Out of Stock - On the Way
Castor Wheel 200mm | Nylon, 1200kg, 25mm Ball bearing (KW200NYBJ120025)
£63.52200mm Nylon Wheel with 25mm Ball Bearing. Load Capacity = 1200kg - Out of Stock - On the Way
Castor Wheel 200mm | White Nylon, 600kg, 20mm Plain Bore (KW200NY2060)
£20.07200mm White Nylon Castor Wheel with 20mm Smooth Pl... Read Moreain Bore, 58mm hub length and 43mm tread width. Load Capacity = 600kgNylon Castor Wheels are a hard tread and a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. Together with the strength of nylon and because it wont damage concrete floors, makes nylon wheel probably the most popular choice for the widest range of industrial and domestic applications. - In Stock
Castor Wheel 100mm | Nylon, 175kg, 12mm Roller Bearing (AW100NYB)
£6.66100mm Nylon Castor Wheel with 12mm Roller Beari... Read Moreng, 30mm Tread Width and 40mm Hub Length (the distance through the central bore). The load Load Capacity is 175kg using manual propulsion at 4km/h.
This wheel contains a Roller Bearing which consist of steel rollers housed in a plastic cage that lowers the rolling resistance even when under load.
- In Stock
Castor Wheel 100mm | Nylon, 200kg, 15mm Plain Bore (KW100NY1547)
£5.12100mm Nylon Wheel with 15mm Plain Bore. Load Capacity = 200kg - In Stock
Castor Wheel 125mm | Nylon, 250kg, 12mm Plain Bore (KW125NY1245)
£7.73125mm Nylon Wheel with 12mm Plain Bore. Load Capacity = 250kg - In Stock
Castor Wheel 150mm | Nylon, 500kg, 20mm Ball bearing (KW150NYBJ)
£17.38150mm Nylon Wheel with 20mm Ball Bearing. Load Capacity = 500kg - In Stock
Castor Wheel 63mm | Nylon, 122kg, 9mm Plain Bore (WNY25)
£1.7363mm White Nylon caster wheel with 33mm Hub Length... Read More (the distance through the central bore), 22mm Tread Width and a 9.5mm Smooth Plain Bore. Load Capacity = 122kg.Nylon Castor wheels are probably the most commonly used wheel because they offer a high load capacity for the lowest cost. They are also extremely strong, maintenance free, do not damage or mark concrete flooring and they are extremely resistant to water, salts, greases, acids and alkalis. - In Stock
Castor Wheel 200mm | Nylon, 550kg, 20mm Roller Bearing (AW200NYB)
£18.42200mm Nylon Castor Wheel with 20mm Roller Beari... Read Moreng, 80mm Tread Width and 58mm Hub Length. This wheel has a load capacity of 550kg.
This is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most castor wheel material.
The wheel has a roller bearing in the hub (central part of the wheel) which consists of rollers made of steel within a cage. These rollers rotate between the axle tube and the wheel hub. This makes the rolling resistance of the bearing relatively slight, even under heavy loads. Roller bearings are rugged, robust and largely maintenance-free.
