- Sorry, this product cannot be purchased.
Polyurethane Tyre Wheels
Castor Wheels with a Polyurethane Tyre are one of the most popular choice of wheel for casters. The polyurethane is softer than a hard treads like Nylon or Cast Iron while still offering great load ratings and low rolling resistance.Polyurethane tyres are available with Nylon, Aluminium and Cast Iron Centres.
... The softer tyre means it is more elastic and not only will it not damage or mark most flooring,. Furthermore, it can absorb rolling vibrations from the floor which reduces noise and increases user comfort.
Being harder than a soft tread like Rubber, a polyurethane tyre is more resistant to compression and has a lower rolling resistance. Rolling resistance is the force required to keep the wheel in motion at a constant speed when under load.
In heavy duty applications, polyurethane is hard wearing with more abrasion and tear resistance than rubber tyre castor wheels offering 10 times the useful life.
As an alterative to Cast Iron, polyurethane can offer similar load capacity. The added benefit is that they are more gentle on floors. Though the tyre will wear more quickly than Cast Iron, on larger sizes, bonded polyurethane wheels can be retyred. This is generally at a lower cost than the buying a new wheel. Read More
- Display 15 Products per page
-
In StockDesigner Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Plain Bore Keywayed (15050PTU25)
£126.69150mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockDesigner Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1000kg, 25mm Plain Bore Keywayed (20040PTU25)
£123.29200mm Polyurethane (Extra Heavy Duty) Tyre on a... Read More Cast Iron Centre Wheel with 40mm Tread Width, 25mm Keyway Plain Bore and 50mm Hub Length.
This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCrown Tread Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 450kg, 20mm Ball bearing (CR12520241)
£37.31125mm Crown Tread Polyurethane / Cast Iron Wheel w... Read Moreith 20mm Ball Bearing. Load Capacity = 450kg -
In StockCastor Wheel 150mm | Polyurethane Tyre / Nylon Centre, 400kg, 20mm Ball bearing (AW150PNBJ)
£20.09150mm Red Polyurethane Tyre on a Nylon Centre Whee... Read Morel with a 37mm Tread Width and 60mm hub length (the distance through the central bore). The castor wheel is fitted with 20mm Ball bearings to enable smooth and easy operation. The wheel is very strong with a load capacity of 400kg at 4km/h (walking speed) using manual propulsion, making it suitable for most industrial and domestic applications. -
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 650kg, 20mm Ball bearing (AW150PCB50)
£41.81150mm Caster Wheel with a Yellow Polyurethane Tyre... Read More (91 Shore A) on a Cast Iron Centre. It has two quality 20mm Shielded Ball bearings, a 50mm hub length and a Load Capacity of 650kg. This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions. -
In StockCastor Wheel 100mm | Polyurethane Tyre / Cast Iron Centre, 250kg, 12mm Roller Bearing (100PT14)
£35.29100mm Polyurethane Tyre Wheel on a Cast Iron Centr... Read Moree Wheel (Revvo Brand) with a 12mm Roller Bearing, 29mm Tread Width and 45mm Hub Length (Distance through the central bore). Load Capacity = 250kg This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads. -
In StockDesigner Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 2000kg, 30mm Plain Bore (25070PT030)
£244.09250mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 725kg, 20mm Roller Bearing (WSU6RBM20)
£63.99150mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel with a 20mm Roller Bearing (Flexello). Load Capacity = 725kg
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making it smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required start the wheel rolling.
-
In StockCastor Wheel 250mm | Polyurethane Tyre / Cast Iron Centre, 2950kg, 31.8mm Taper Roller (WSU210TM)
£330.54250mm Red Polyurethane Tyre on a Cast Iron Centre ... Read More(Flexello Brand). The wheel has a tread width of 76mm and a 92mm hub length (the distance through the central bore). The central bore contains 31.8mm (1 1/4 inch) Taper Roller Bearings for lower rolling resistance and makes the wheel suitable for power towing. The Load Capacity is 2,950Kg.
-
In StockCastor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1100kg, 20mm Ball Bearing (20020241)
£65.43200mm Polyurethane Tyre on a Cast Iron Centre Cast... Read Moreor Wheel with 20mm Ball Bearings, 50mm Tread Width and 60mm Hub Length (the distance through the bore). Load Capacity = 1100kg The polyurethane used as the tyre is a high quality polyurethane that has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads. -
In StockCastor Wheel 160mm | Polyurethane Tyre / Aluminium Centre, 600kg, 20mm Ball bearing (AW160PAB)
£32.97160mm Castor Wheel with a Polyurethane Tyre (Shore... Read More A 94) on an Aluminium Centre with 20mm Ball bearings. Load Capacity = 600kg using manual propulsion at 4km/h. Key Specifications:- Tread Width: 50mm
- Hub Length: 60mm (the distance through the central bore)
- Bearing Type: 20mm Ball Bearing
- Tyre Hardness: Shore A 94
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Low Noise Operation
-
In StockDesigner Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 30mm Plain Bore (30075PT030)
£382.80300mm Polyurethane (Premium Grade REVVOTHANE) Tyre... Read Mored / Cast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems. The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Roller Bearing (150PT15)
£62.74150mm Polyurethane Tyre on a Cast Iron Centre Whee... Read Morel (Revvo) with a 20mm Roller Bearing, 38mm Tread Width, 60mm Hub (the distance through the central bore) and a 92-97 shore A hardness. This castor wheel's Load Capacity is 730kg using manual propulsion and 4 km/h. Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move. -
In StockCastor Wheel 250mm | Polyurethane Tyre / Cast Iron Centre, 1200kg, 25mm Ball Bearing (250PT2H)
£132.48250mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel (Revvo) with 25mm Ball Bearings, 45mm Tread Width and 57mm Hub Length (the distance through the bore). Load Capacity = 1200kg
The REVVOTHANE polyurethane used as the tyre is a high quality polyurethane that has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
-
In StockCastor Wheel 250mm | Polyurethane Tyre / Cast Iron Centre, 2500kg, 25mm Ball Bearing (250PT2P)
£280.63250mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel (Revvo) with 25mm Ball Bearings. The wheel has a 75mm Tread Width and 83mm Hub Length (the distance through the central bore) and a Load Capacity of 2,500kg.
This quality polyurethane tyre is made for superior performance and has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
