Polyurethane Tyre Wheels
Castor Wheels with a Polyurethane Tyre are one of the most popular choices of wheel for castors. The polyurethane is softer than hard treads like Nylon or Cast Iron, without compressing as much as rubber and offering great load ratings and low rolling resistance. The softer tyre reduces the risk of damage or marking on most floors, and ca...n absorb rolling vibrations, reducing noise.Polyurethane tyres are available with Nylon, Aluminium and Cast Iron Centres.
In heavy duty applications, polyurethane is hard wearing with more abrasion and tear resistance than rubber tyre castor wheels offering 10 times the useful life. Read More
- Display 15 Products per page
In StockDesigner Polyurethane Tyre Wheel 250mm | Polyurethane Tyre / Cast Iron, 2000kg, 30mm Plain Bore (25070PT030)
£244.09250mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 400kg, 20mm Ball bearing (AW125PCB)
£37.66125mm Caster Wheel with a Yellow Polyurethane Tyre... Read More (91 Shore A) on a Cast Iron Centre. It has two quality 20mm Shielded Ball bearings and a Load Capacity of 400kg.This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions. - In Stock
Castor Wheel 100mm | Polyurethane Tyre / Cast Iron Centre, 340kg, 20mm Ball Bearing (100PT2H)
£62.80100mm Polyurethane Tyre on a Cast Iron Centre C... Read Moreastor Wheel (Revvo) with 57mm Hub Length (the distance through the central bore) and a 20mm Ball Bearing. Load Capacity = 340kg
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
- In Stock
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 30mm Plain Bore (30075PT030)
£382.80300mm Polyurethane (Premium Grade REVVOTHANE) Tyre... Read Mored / Cast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 75mm | Polyurethane Tyre / Cast Iron Centre, 175kg, 12mm Roller Bearing (075PT14)
£30.2275mm Polyurethane Tyre on a Cast Iron Centre Revvo... Read More Wheel with a 45mm Hub Length (the distance through the central bore) and a 12mm Roller Bearing. Load Capacity = 175Kg - In Stock
Castor Wheel 100mm | Polyurethane Tyre / Nylon Centre, 200kg, 12mm Roller Bearing (KW100PNB1240)
£9.61100mm Red Polyurethane Tyre Castor Wheel with a Wh... Read Moreite Nylon Centre and 12mm Needle Roller Bearing, 35m Tread Width and 40mm Hub Length (the distance through the central bore / hole). The Load Capacity of with wheel is 200kg. - Out of Stock - On the Way
Castor Wheel 150mm | Polyurethane Tyre / Nylon Centre, 600kg, 20mm Plain Bore (WPN6M20)
£19.92150mm Red Polyurethane Tyre on a Grey Nylon Centre... Read More Caster Wheel (Flexello Brand) with 45mm Tread width, 60mm Hub length, 20mm Smooth Plain Bore and a Load Capacity of 600kg - In Stock
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 50mm Plain Bore Keywayed (30075PTU50)
£401.96300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 50mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1800kg, 25.4mm Taper Roller (200PTTC)
£233.67200mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel (Revvo Wheel) with 25.4mm (1 Inch) Taper Roller Bearing, 75mm Tread Width and 89mm Hub Length (the distance through the central bore). Load Capacity = 1800kg
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
- In Stock
Designer Polyurethane Tyre Wheel 200mm | Cast Iron Centre, 1400kg, 30mm Plain Bore (H20060PBM30)
Original price was: £348.52.£243.97Current price is: £243.97.Sale!200mm Polyurethane (Extra Heavy Duty) Tyred on a C... Read Moreast Iron Centre Wheel with 30mm Plain Bore. This is a high performance uses a high quality polyurethane with a tyre hardness Shore 92 (+/- 3) A. This polyurethane has a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions:Load Capacity Factors:- Load Capacity = 1050kg if uses for more than 45 minutes continuously.
- Load Capacity = 1120kg if used at speed 6 - 10km/h
- Load Capacity = 980kg if used at speed 10 - 16 km/h
- Load Capacity = 980kg if used as a Drive Wheel
- In Stock
80mm Red Polyurethane Tyre Wheel, 12mm Roller Bearing, 130kg (MVW080PN1B)
Original price was: £6.13.£3.37Current price is: £3.37.Sale!80mm Castor Wheel with a ... Read MoreRed Polyurethane Tyre on a Grey Nylon Centre and a 130kg Load Capacity.Key Features:- Wheel Diameter: 80mm
- Wheel Tread Width: 32mm
- Hub Length: 40mm (the distance through the central bore)
- Wheel Material: Red Polyurethane Tyre on a Grey Nylon Centre
- Bearing Type: Roller Bearing
- Shore Hardness: 95A
- Load Rating: 130kg (using manual propulsion at 4km/h)
- Metal Thread guards,
- M12x36mm Needle Roller Bearing,
- a Steel Tube (12mm OD X 8mm ID x 40mm Length); and,
- a 8mm x 59mm Bolt & Nut.
- In Stock
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Plain Bore Keywayed (15050PTU25)
£126.69150mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 100mm | Polyurethane Tyre / Cast Iron Centre, 250kg, 12mm Roller Bearing (100PT14)
£35.29100mm Polyurethane Tyre Wheel on a Cast Iron Centr... Read Moree Wheel (Revvo Brand) with a 12mm Roller Bearing, 29mm Tread Width and 45mm Hub Length (Distance through the central bore). Load Capacity = 250kgThis polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads. - In Stock
Castor Wheel 80mm | Polyurethane Tyre / Cast Iron Centre, 250kg, 15mm Ball bearing (KW080PCB)
£24.7380mm Polyurethane Tyre on a Cast ... Read MoreIron Centre Wheel with 15mm Ball bearings, 36mm Tread Width and 36mm Hub Length (the distance through the bore). Load Capacity = 250kg using manual propulsion at 4km/h (walking speed) - In Stock
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 30mm Plain Bore (20060PT030)
£168.88200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
