Polyurethane Tyre Wheels
Castor Wheels with a Polyurethane Tyre are one of the most popular choice of wheel for casters. The polyurethane is softer than a hard treads like Nylon or Cast Iron while still offering great load ratings and low rolling resistance.Polyurethane tyres are available with Nylon, Aluminium and Cast Iron Centres.
... The softer tyre means it is more elastic and not only will it not damage or mark most flooring,. Furthermore, it can absorb rolling vibrations from the floor which reduces noise and increases user comfort.
Being harder than a soft tread like Rubber, a polyurethane tyre is more resistant to compression and has a lower rolling resistance. Rolling resistance is the force required to keep the wheel in motion at a constant speed when under load.
In heavy duty applications, polyurethane is hard wearing with more abrasion and tear resistance than rubber tyre castor wheels offering 10 times the useful life.
As an alterative to Cast Iron, polyurethane can offer similar load capacity. The added benefit is that they are more gentle on floors. Though the tyre will wear more quickly than Cast Iron, on larger sizes, bonded polyurethane wheels can be retyred. This is generally at a lower cost than the buying a new wheel. Read More
- Display 15 Products per page
Out of Stock - On the WayCastor Wheel 100mm | Polyurethane Tyre / Nylon Centre, 160kg, 12mm Roller Bearing (WPN41RBM12)
£10.60100mm Red Polyurethane Tyre Castor Wheel with a Gr... Read Moreey Nylon Centre and 12mm Needle Roller Bearing. The Load Capacity of with wheel is 160kg.This wheel has been discontinued. The alternative with the same product specifications is KW100PNB1240- In Stock
Crown Tread Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 450kg, 20mm Ball bearing (CR12520241)
£37.31125mm Crown Tread Polyurethane tyre on a Cast Iron... Read More Wheel. This castor wheel has a 50mm Tread Width (at it's widest point) and 20mm Ball Bearings. Load Capacity = 450kg - In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
£89.37150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h.Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
- In Stock
Designer Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 50mm Plain Bore Keywayed (30075PTU50)
£401.96300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 50mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- Pre-Order
Castor Wheel 400mm | Polyurethane Tyre / Cast Iron Centre, 6120kg, 34.9mm Taper Roller (WSU516TM)
400mm Red Polyurethane Tyre on a Cast Iron Centre ... Read More(Flexello Brand). The wheel has a tread width of 127mm and a 143mm hub length (the distance through the central bore). The central bore contains 34.9mm Taper Roller Bearings for lower rolling resistance and making the wheel suitable for power towing. The Load Capacity is 6120Kg. - In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1800kg, 25mm Ball Bearing (200PT2P)
£195.35200mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel With 25mm Ball Bearing. This wheel has a relatively wide 75mm Tread Width and 83mm Hub Length (distance through the central bore) and can be power towed, The Load Capacity of this castor wheel is 1800kg at towing speeds of 6km/h.
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
- Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Ball Bearing (15050PT225)
£136.57150mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1000kg, 25mm Plain Bore Keywayed (20040PTU25)
£123.29200mm Polyurethane (Extra Heavy Duty) Tyre on a... Read More Cast Iron Centre Wheel with 40mm Tread Width, 25mm Keyway Plain Bore and 50mm Hub Length.
This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 100mm | Polyurethane Tyre / Nylon Centre, 125kg, 8mm Ball bearing (AW100NPB)
£11.93100mm Castor Wheel with an Orange Polyurethane Tyr... Read Moree on a Black Nylon Centre, The wheel has a 30mm Tread Width and 40mm Hub Length with an 8mm Single Ball Bearing and a Load Capacity of 125kg - In Stock
Castor Wheel 100mm | Polyurethane Tyre / Cast Iron Centre, 340kg, 20mm Ball Bearing (100PT2H)
£62.80100mm Polyurethane Tyre on a Cast Iron Centre C... Read Moreastor Wheel (Revvo) with 57mm Hub Length (the distance through the central bore) and a 20mm Ball Bearing. Load Capacity = 340kg
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
- Discontinued
Castor Wheel 100mm | Polyurethane Tyre / Nylon Centre, 250kg, 15mm Plain Bore (WPN4M15)
£11.96100mm Red Polyurethane Tyre on a Grey Nylon Centre... Read More castor wheel with 35mm Tread Width, 48mm Hub Length and 15mm smooth plain bore. Load Capacity = 250kgThis product has been discontinued. Our alternative is the KW100PN1548 (click here to view castor wheel)KW100PN1548 Specifications:- Diameter: 100mm
- Central Bore: 15mm
- Bearing Type: Smooth Plain Bore
- Tread Width: 34mm
- Hub Length: 48mm
- Load Capacity: 220kg
- In Stock
Castor Wheel 125mm | Polyurethane Tyre / Nylon Centre, 300kg, 15mm Roller Bearing (WPN5RBM15)
£20.17125mm Castor Wheel with a Red Polyurethane Tyred o... Read Moren a Grey Nylon Centre (Genuine Flexello Brand) with a quality 15mm Roller Bearing. Load Capacity = 300kg - In Stock
150mm Polyurethane Tyre / Nylon Centre Wheel, 20mm Roller Bearing, 600kg (WPN6KRB20)
£25.90150mm Red Polyurethane Tyre on a White Nylon Centr... Read Moree wheel (Flexello). This castor wheel has a tread width of 45mm and a hub length (the distance through the central bore) of 58mm.The wheel is fitted with a 20mm Needle Roller Bearing to reduce the rolling resistance.With a load capacity of 600kg at 4km/h (walking speed) using manual propulsion, this is one of the strongest polyurethane tyre / nylon centre wheels available. - In Stock
Castor Wheel 250mm | Polyurethane Tyre / Cast Iron Centre, 2950kg, 31.8mm Taper Roller (WSU210TM)
£330.54250mm Red Polyurethane Tyre on a Cast Iron Centre ... Read More(Flexello Brand). The wheel has a tread width of 76mm and a 92mm hub length (the distance through the central bore). The central bore contains 31.8mm (1 ¼ inch) Taper Roller Bearings for lower rolling resistance and makes the wheel suitable for power towing. The Load Capacity is 2,950Kg. - In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1045kg, 25mm Roller Bearing, 25.4mm Bore (WSU8LRB)
£98.53200mm Polyurethane Tyre / Cast Iron Centre Wheel w... Read Moreith 25.4mm (1 Inch) Roller Bearing. Load Capacity = 1045kg
