Polyurethane Tyre Wheels
Castor Wheels with a Polyurethane Tyre are one of the most popular choices of wheel for castors. The polyurethane is softer than hard treads like Nylon or Cast Iron, without compressing as much as rubber and offering great load ratings and low rolling resistance. The softer tyre reduces the risk of damage or marking on most floors, and ca...n absorb rolling vibrations, reducing noise.Polyurethane tyres are available with Nylon, Aluminium and Cast Iron Centres.
In heavy duty applications, polyurethane is hard wearing with more abrasion and tear resistance than rubber tyre castor wheels offering 10 times the useful life. Read More
- Display 15 Products per page
In StockDesigner Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 25mm Ball Bearing (10040PT225)
£111.53100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 100mm | Polyurethane Tyre / Nylon Centre, 125kg, 8mm Ball bearing (AW100NPB)
£11.93100mm Castor Wheel with an Orange Polyurethane Tyr... Read Moree on a Black Nylon Centre, The wheel has a 30mm Tread Width and 40mm Hub Length with an 8mm Single Ball Bearing and a Load Capacity of 125kg - In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
£89.37150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h.Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
- In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Roller Bearing (150PT15)
£62.74150mm Polyurethane Tyre on a Cast Iron Centre Whee... Read Morel (Revvo) with a 20mm Roller Bearing, 38mm Tread Width, 60mm Hub (the distance through the central bore) and a 92-97 shore A hardness. This castor wheel's Load Capacity is 730kg using manual propulsion and 4 km/h.Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move. - Out of Stock - On the Way
Castor Wheel 150mm | Polyurethane Tyre / Nylon Centre, 600kg, 20mm Plain Bore (WPN6M20)
£19.92150mm Red Polyurethane Tyre on a Grey Nylon Centre... Read More Caster Wheel (Flexello Brand) with 45mm Tread width, 60mm Hub length, 20mm Smooth Plain Bore and a Load Capacity of 600kg - Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Ball Bearing (15050PT225)
£136.57150mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 80mm | Polyurethane Tyre / Nylon Centre, 100kg, 8mm Ball Bearing (AW080NPB)
£10.9480mm Castor Wheel with an Orange Polyurethane Tyre... Read More on a black Nylon Centre. This wheel has a 25mm Tread Width, 8mm Single Ball Bearing and 39mm Hub length (the distance through the central bore). The load capacity is 100kg - In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1800kg, 25mm Ball Bearing (200PT2P)
£195.35200mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel With 25mm Ball Bearing. This wheel has a relatively wide 75mm Tread Width and 83mm Hub Length (distance through the central bore) and can be power towed, The Load Capacity of this castor wheel is 1800kg at towing speeds of 6km/h.
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
- In Stock
Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1800kg, 25.4mm Taper Roller (200PTTC)
£233.67200mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel (Revvo Wheel) with 25.4mm (1 Inch) Taper Roller Bearing, 75mm Tread Width and 89mm Hub Length (the distance through the central bore). Load Capacity = 1800kg
This polyurethane tyre has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads.
- In Stock
Crown Tread Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 750kg, 20mm Ball bearing (CR20020241)
£62.20200mm Crown Tread Polyurethane / Cast Iron Wheel w... Read Moreith 20mm Ball Bearing. Load Capacity = 750kg - In Stock
Castor Wheel, 150mm | Polyurethane Tyre / Cast Iron Centre, 725kg Capacity, 25.4mm Roller Bearing (WSU6LRB)
£70.75150mm Castor Wheel with red Polyurethane Tyre on a... Read More red painted Cast Iron Centre (Flexello Brand). This wheel comes with a grease nipple for ease of lubrication maintenance. It has a Tread Width of 45mm, a hub length (the distance through the central bore) of 60mm and a 1 inch (24.5mm) Needle Roller Bearing. The Load Capacity is 725kg. - Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 700kg, 20mm Plain Bore (15035PT020)
£102.30150mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 20mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Castor Wheel 160mm | Polyurethane Tyre / Cast Iron Centre, 850kg, 20mm Ball bearing (KW160PC2B)
Original price was: £64.78.£51.83Current price is: £51.83.Sale!160mm Caster Wheel with a Polyurethane Tyr... Read Moree (94 Shore A) on a Cast Iron Centre with quality 20mm precision Shielded Ball bearings, a 60mm hub length and a Load Capacity of 850kg using manual propulsion at 4km/h (waking speed)This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions. - In Stock
Crown Tread Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 550kg, 20mm Ball bearing (CR15020241)
£43.10150mm Crown Tread Polyurethane / Cast Iron Wheel w... Read Moreith 20mm Ball Bearing. Load Capacity = 550kg - In Stock
Castor Wheel 125mm | Polyurethane Tyre / Cast Iron Centre, 400kg, 20mm Ball bearing (AW125PCB)
£37.66125mm Caster Wheel with a Yellow Polyurethane Tyre... Read More (91 Shore A) on a Cast Iron Centre. It has two quality 20mm Shielded Ball bearings and a Load Capacity of 400kg.This castor wheel has a high load rating for heavy duty applications yet gentle on concrete flooring. The polyurethane used on this wheel has a low rolling resistance, excellent elasticity and is resistant to compression and abrasions.
