- Sorry, this product cannot be purchased.
Castor Accessories and Fittings
Our range of castor fittings can adapt castor wheels to your requirements. We supply the fixings required to expand or reduce bolt holes as needed, replace ball bearings and wheel tubes, add castor wheel locks and more.
- Display 15 Products per page
-
In StockExpander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 20mm OD x 12.5mm ID x 61.5mm Len (TUBE2653010)
£2.02Steel wheel tube to reduce a 20mm bore to 12.5mm. ... Read MoreThis steel tube has a 20mm Outside Diameter x 12.5mm Inside Diameter and 61.5mm Long and suits an M12 bolt. The tube is to suit a castor wheel with a 20mm bore and 60mm hub length. -
In Stock6201-2RS Dual Rubber Sealed Ball Bearing 12mm x 32mm x 10mm (62012RS)
Original price was: £1.90.£1.52Current price is: £1.52. Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 12mm
- Outer Diameter: 32mm
- Width: 10mm
-
In Stock6004-2RS Dual Rubber Sealed Ball Bearing 20mm x 42mm x 12mm (60042RS)
Original price was: £2.20.£1.76Current price is: £1.76. Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 42mm
- Width: 12mm
-
In StockCastor Fixing Plate 105mm x 80mm Bolt Hole Centres (PLATE135x110)
£4.33Our un-plated castor fixing plate is made for y... Read Moreou to weld / attach to your equipment to give you a suitable base to attach your castor.
The plate measures 135x110mm and is 3mm thick. It comes with 4 horizontally slotted bolt fixing holes with 105mm x 80mm bolt hole centres. Each hole measures 11mm x 15mm and suits 10mm bolts.
You can purchase the fixing bolts here
-
In StockM6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In StockCastor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.34Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor. The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts. You can purchase the fixing bolts here -
In StockExpander Fitting, Square Tube, 24mm to 27mm (WR4724/27)
£3.22Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
Expander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
Expander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockTeflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree. This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In StockRetaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2110mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. -
In Stock
Expander Fitting, Square Tube, 19mm to 21.5mm (WR4719/21.5)
£2.87Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm.
