- Sorry, this product cannot be purchased.
- Display 15 Products per page
-
In Stock
Castor Wheel 75mm | Polyurethane Tyre / Cast Iron Centre, 300kg, 12mm Ball Bearing (07535PT212)
75mm Polyurethane (Premium Grade REVVOTHANE) Ty... Read Morere on a Cast Iron Centre Wheel running on precision 12mm Ball Bearings.This is high performance wheel and the stated load capacity is based on the wheel being manually propelled at 4 km/h (walking speed).
As a high performance wheel it is often used in much more demanding applications than a standard polyurethane tyre castor wheel. As with all polyurethane tyred wheels, demanding applications involving extended periods of use or speeds greater 4 km/h the friction will generate heat build up in the polyurethane. REVVOTHANE is a high quality polyurethane that offers minimal heat build up and performs exceptionally well within the following guidelines:
- If the wheel be in continual use for more than 45 minutes, this reduces the load capacity by 25%.
- The load capacity is reduced by a further 30% if used as Drive Wheel
- Reduce load by further 20% if the running speed is between 6 km/h and 10 km/h
- Reduce the load by a further 30% if the running speed is between 10 km/h and 16 km/h
-
In Stock
80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NY)
80mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60mm Bolt Hole Centres. Nylon castor wheel with Plain Bore. Load Capacity = 150kg -
In Stock
150mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (622NY)
150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 500kg -
In Stock
100mm Fixed Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321968)
100mm Top Plate Fixed Castor (Pressed Steel) wi... Read Moreth 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock
160mm Fixed Castor, 160kg Capacity | Rubber Tyre Wheel, Plain Bore (LFV160RP)
160mm Top Plate Fixed Castor with a Grey Rubber Ty... Read Morere wheel on a Nylon Center. It as 105x80mm fixing bolt hole centres and a Load Capacity of 135kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed. -
In Stock
100mm Swivel Castor with Brake, 250kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KBCR10020241)
100mm Swivel Castor (Pressed Steel) with Swivel &a... Read Moremp; Wheel Brake. Crown Tread Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 250kg -
Out of Stock - On the Way
250mm Swivel Castor, 1200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH250PT1H)
250mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1200kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock
125mm Fixed Castor, 160kg Capacity | Polypropylene Wheel, Plain Bore (LFV125PP)
125mm top Plate Fixed Castor with a White Polyprop... Read Moreylene wheel. It has 80x60mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/h This is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. -
In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h. Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
-
In Stock
150mm Swivel Castor with Brake, 1000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (K2BT150PC2B)
150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor with Brake. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
The braking mechanism on this product is a wheel brake only. This means that when the brake is applied the brake acts only on the castor wheels while the castor's swivel head is free to turn.
This castor has a top plate measuring 170mm x 170mm with bolt hole spacings of 130mm x 130mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1,000kg Load Rating at 4km/h
-
In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
4 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In Stock
125mm Black Fixed Castor, 220kg Capacity | Rubber Tyre Wheel, Ball Bearing (MFV125BRN2B)
125mm All Black Fixed Castor with Black Elastic Ru... Read Morebber Tyre on a nylon centre wheel with a single ball bearing. This castor is designed for theatre applications to reduce reflection from lighting. It can also be used in any application where a pressed steel castor is required. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 220kg using manual propulsion at 4km/h (walking speed) The Black Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is quiet and gentle on floors. The soft tread rubber (65 Shore A) absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products. DOWNLOAD CATALOGUE PAGE HERE -
In Stock
75mm Swivel Castor, 80kg Capacity | Polypropylene wheel, Plain Bore (2KS075PPPL)
75mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Holes and a 60x60mm Top Plate. Two Black Polypropylene Wheel each with a tread width of 24mm and a smooth Plain Bore. Load Capacity = 80kg -
In Stock
100mm Fixed Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MFK100NY)
100mm Top Plate Fixed Castor (Pressed Steel) with ... Read More80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 250kg