- Sorry, this product cannot be purchased.
Braked Castors
Braked Castors are sometimes referred to as lockable castors and it is usually swivel castors that have brakes. The Brake can lock either the wheel (Wheel Brake), the swivel head (Directional Lock), or both simultaneously (Total Stop or Swivel & Wheel Brake). It is un...common to find a fixed castor with a brake. Our GD Series of shock absorbing castors is one of the few that do. See GDS Shock Absorbing Castors here.Braked Castors can swivel the wheel 360 degrees about the vertical axis. They consist of a housing with a lockable brake and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor’s frame or bracket.
The plate fitting determines how the castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Braked Castors, like Swivel Castors, can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Braked Castor Offset
The Braked Castor’s offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason any swivelling castor will go in the direction you want it to go regardless its starting direction. Read More
- Display 15 Products per page
-
In Stock100mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH100NY1BSWB)
£9.51100mm Single Bolt Hole (12mm) Swivel Castor with S... Read Morewivel and Wheel Brake (Pressed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock160mm Swivel Castor with Brake, 500kg Capacity | Nylon Wheel, Plain Bore (MSK160NYBR)
£27.45160mm Top Plate Swivel Castor with Brake (Pressed ... Read MoreSteel) with 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 500kg -
In Stock200mm Swivel and Brake Castor, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH200RN1BSWB)
£34.68200mm Single Bolt Hole (12mm) Swivel Castor with S... Read Morewivel and Wheel Brake (Pressed Steel). Blue Rubber Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock75mm Stainless Steel Swivel Castor With Brake, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATB075TPR)
£11.26This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 50mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has total stop brake and a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here -
In Stock200mm Swivel Castor with Brake, 1500kg Capacity | Nylon Wheel, Ball Bearing (TSH200NY2HF)
£172.69200mm Heavy Duty Top Plate Swivel Castor With S... Read Morewivel & Wheel Brake (Fabricated Castor) with 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 1500kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
-
Out of Stock - On the WaySwivel Castor With Brake (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel (K2BT300PC2BD)
£988.99300mm Twin Wheel Extra Heavy Duty Swivel Castor wi... Read Moreth Brake and Directional Lock. The Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg. The Braking Mechanism On This Product Is A Wheel Brake Only. This Means That When The Brake Is Applied The Brake acts only to stop the rotation of the Castor Wheels. The castor's Swivel head is free to Rotate. The Directional lock fixes the swivel head in one position stopping the swivel head from rotating while allowing the wheel to rotate and for the castor to travel in a fixed direction. -
In Stock100mm Stainless Steel Swivel Castor With Brake, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS100PNBBR)
£30.12100mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Stainless Steel Castor) with 80x60mm Bolt Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
Out of Stock - On the Way75mm Swivel and Brake Castor, 75kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHB075TPR)
£7.76This apparatu... Read Mores / institutional castor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre fitted into a 10mm Single Bolt Hole Swivel Castor with a total stop brake (Pressed Steel Frame) with a double ball race in the swivel head. A total stop brake brakes both the swivel head and the wheel. The load capacity of this castor is 70kg using manual propulsion at 4km/h
This castor is fitted with a grey Thermoplastic Rubber Tyre Wheel that will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock160mm Swivel Castor with Brake, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV160RN2BSWB)
£33.22160mm Top Plate Swivel Castor with Swivel &... Read More; Wheel Brake (Pressed Steel) with 105x80 Hole Centres. Rubber Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 300kg -
In Stock100mm Swivel Castor with Brake, 600kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT100BSFHUD)
Original price was: £358.69.£225.27Current price is: £225.27. Sale!100mm Polyure... Read Morethane tyre Wheel with an aluminium centre is fitted into an extra strong Fabricated Top Plate Swivel Castor with wheel brake and 80x60mm bolt hole centres. The load capacity of this castor is 600kg at 4km/h
This high performance castor is fitted with a quality Polyurethane tyre Wheel with an aluminium centre that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
The double thrust bearing in the swivel head optimise heavy loads
-
In Stock100mm Swivel Castor with Brake, 270kg Capacity | Nylon Wheel, Ball Bearing (KBMG100NYB)
£39.78100mm Top Plate Swivel Castor with Brake (Fabricat... Read Moreed Steel) with 105x80mm fixing Hole Centres. This castor is fitted with a white Nylon Wheel and Ball Bearings. Load Capacity = 270kg using manual propulsion at 4km/h (walking speed). Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Brake Style: Swivel & Wheel Brake (also known as a Total Stop Brake). Locks the wheel and swivel rotation when applied.
- Overall Height: 143mm
- Offset: 35mm
- Swivel Radius: 138mm
- Bearing Type: Ball Bearing
- Load Capacity: 270kg (manual propulsion at 4km/h)
- Nylon castor wheels have a hard tread making them one of the easiest to move (Low tractive resistance). They have a high load capacity, are low maintenance and extremely resistant to water, salts, greases, acids and alkalis.
-
In Stock125mm Swivel Castor with Brake, 300kg Capacity | Nylon Wheel, Ball bearing (HKB12520111)
£85.74125mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 300kg -
In Stock125mm Swivel with Brake Castor, 400kg Capacity, Nylon Wheel, Ball Bearing (KS125NYBJ400SWB)
£69.10125mm Swivel Castor with Total Stop Brake (Heavy D... Read Moreuty Pressed Steel). This castors has a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 400kg -
In Stock75mm Swivel Castor with Brake, 150kg Capacity | Polyurethane Tyre Wheel, Plain Bore (361SUBR)
£34.1075mm Top Plate Swivel Castor with Footbrake (Press... Read Moreed Steel) with 80x60mm Bolt Hole Centres and 95mm Overall Height. Polyurethane Tyre on a Cast Iron Centre castor wheel with 29mm Tread Width and Smooth Plain Bore. Load Capacity = 150kg -
In Stock75mm Swivel Castor with Brake, 90kg Capacity | Rubber Tyre Wheel, Plain Bore (361RNBR)
£12.9075mm Top Plate Swivel Castor with Footbrake (Flexe... Read Morello 61 Series) with 80x60mm Bolt Hole Centres. This castor is fitted with a Blue Elastic Rubber Tyre wheel on a Nylon Centre Wheel with a Plain Bore. Load Capacity = 90kg The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial or domestic applications. This range has a single ball bearing swivel head and finished with a bright zinc plating.
