- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSK100PN1B)
£13.12100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS125NYBH)
£27.33125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
In Stock35mm Compact Swivel Castor, 100kg Capacity | 35mm Polyurethane Tyre Wheel, Ball bearing (KS035PT2B)
£11.3635mm Low Level swivel castor with 60x60mm Top Plat... Read Moree and 48/38x48/38mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 52.5mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg -
Out of Stock - On the Way125mm Swivel Castor, 425kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH125PT1H)
£102.06125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 425kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080RN1B)
£8.7980mm Blue Elastic Rubber Tyre wheel on a nylon ... Read Morecentre with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors. The rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
-
In Stock160mm Stainless Steel Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS160RNB)
£57.33160mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 105x80 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock100mm AGV Swivel Castor, Twin Wheel, 310kg Load | Polyurethane Wheel, Ball bearing (GATD100ASFHUD)
Original price was: £569.41.£220.07Current price is: £220.07. Sale!This Twin wheel ... Read More100mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
Out of Stock - On the Way40mm Swivel Castor, 15kg Capacity | Polypropylene Wheel, Plain Bore (C041PLN)
£2.38A great value, general purpose, light duty cast... Read Moreor. This 40mm Top Plate Swivel Castor has a housing made from pressed steel and with four 38x38mm Fixing holes Hole Centres to accommodate 6mm bolts. The wheel is a Black Polypropylene Wheel with on a smooth Plain Bore and will not damage or mark concrete floors.
The load capacity of the castor is 15kg and the recommended load capacity over 4 castors is 45kg using manual propulsion at 4 km/h.
-
In Stock100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (422NYB)
£20.87100mm Top Plate Swivel Castor (Flexello Brand - Pr... Read Moreessed Steel) with 80x60mm Fixing Bolt Hole Centres and 128mm overall height. White Nylon Wheel with Roller Bearing. Load Capacity = 250kg Nylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most popular castor wheel material. The roller bearing in the hub (central part of the wheel) consists of steel rollers within an impact resistant plastic cage. These rollers rotate between the axle tube and the wheel hub which reduces the rolling resistance making it easy to move even under heavy loads. Roller bearings are rugged, robust and largely maintenance-free.
-
In Stock160mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH160RN1B)
£23.23160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Rubber Tyred / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSV100NY2B)
£8.75100mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
-
In Stock
250mm Swivel Castor, 1200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH250PT2H)
£211.65250mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1200kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
Out of Stock - On the Way40mm Swivel Castor, 15kg Capacity | Polypropylene Wheel, Plain Bore (1002005)
£2.3840mm Top Plate Swivel Castor (Pressed Steel) with ... Read More38x38mm Bolt Hole Centres. Polypropylene Wheel with Plain Bore. Load Capacity = 15kg -
In Stock160mm Stainless Steel Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS160RNBBH)
£62.08160mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 16mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock75mm Footmaster Levelling Castor, Stem Fitting, 100kg Capacity | Nylon Wheel (KGD-120S)
£67.7775mm Footmaster Levelling Castor with M16x 24mm St... Read Moreem Fitting. 1000kg Static and 500kg Dynamic Load Capacity. Die Cast Aluminium Foot Pad. Hex Adjuster with M16 Leveler (Spanner not included) The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity.
