- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock75mm Stainless Steel Swivel Castor, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATS075TPR)
£8.94This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here -
In Stock50mm Swivel Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBH)
£2.33This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In StockSwivel Castor (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST300PC2BD)
£911.75300mm Twin Wheel Extra Heavy Duty Swivel Castor wi... Read Moreth Directional Lock. The Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg. The directional lock fixes the swivel head in one direction for straight line travel. -
In Stock125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MSK125NY)
£13.64125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Nylon Wheel with a Smooth Plain Bore. Load Capacity = 250kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. The nylon wheel is insensitive to water and will not mark or damage most flooring.
-
In Stock80mm Swivel Castor, 130kg Capacity | Nylon Wheel, Roller Bearing (MSVH080NY1B)
£6.6480mm Single Bolt Hole (12mm) Swivel Castor with Ny... Read Morelon Wheel with Roller Bearing. Load Capacity = 130kg -
In Stock50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PP)
£3.1950mm Swivel Castor with a 4 hole top plate and 48/... Read More38x48/38mm bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg -
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV100RN2B)
£10.50100mm Swivel Castor bracket (Pressed Steel) fitted... Read More with a Blue Elastic Rubber Tyre on a nylon centre wheel with a ball bearing. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed) The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products. This castor is often used on flight cases as well as in many medical, industrial and domestic applications. -
In Stock50mm Swivel Castor, 40kg Capacity | Nylon Wheel, Plain Bore (1350000)
£2.2350mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres. White Nylon Wheel with Plain Bore. Load Capacity = 40kg -
In Stock100mm High Temperature Swivel Castor, 125kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX100HTBH)
£18.31100mm Single Bolt Hole Swivel Castor (Pressed Stee... Read Morel) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 125kg -
In Stock80mm Stainless Steel Swivel Castor, 120kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS080PNB)
£20.7680mm Top Plate Stainless Steel Swivel Castor. This... Read More castor has a top plate measuring 100x85mm with 80x60mm fixing Bolt Hole Centres. The castor wheel has a Polyurethane Tyre on a white Nylon Centre Wheel with a stainless steel Roller Bearing. The Load Capacity is 120kg using manual propulsion at 4km/h. -
In Stock125mm Swivel Castor, 370kg Capacity | Polyurethane Tyre Wheel, Ball bearing (MSW125APCB)
£36.27125mm Top Plate Swivel Castor (Fabricated Steel). ... Read More105x80 bolt hole centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Journal. Load Capacity = 370kg -
In Stock97mm Footmaster Levelling Castor, Plate Fitting, 1500kg Capacity | 97mm Nylon Wheel (KGD-150F)
£95.5997mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting. 1500kg Static and 750kg Dynamic Load Capacity. The Die Cast Aluminium Foot Pad is operated by a Hex Adjuster with M20 Leveler (Spanner not included) The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity.
-
In Stock63mm Swivel Castor, 122kg Capacity | 63mm Nylon Wheel, Plain Bore (261NY)
£6.2163mm Top Plate Swivel Castor (Pressed Steel) with ... Read More76x44.5mm Bolt Hole Centres and 81mm Overall Height. White Nylon caster wheel with 22mm Tread Width and Smooth Plain Bore. Load Capacity = 122kg -
Out of Stock - On the Way125mm Swivel Castor, 425kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH125PT1H)
£102.06125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 425kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock150mm Swivel Castor (Powder Coated), 700kg Capacity | Polyurethane Tyre Wheel (KGHP150ASFMUD)
Original price was: £137.41.£79.66Current price is: £79.66. Sale!150mm Heavy-duty Swivel Castor with a Powder Coate... Read Mored Pressed Steel Bracket and a 200mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features:- 700kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
