- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock60mm Compact Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBH)
£20.0460mm Low Level swivel castor with 12mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PP)
£2.2750mm White Polyp... Read Moreropylene Wheel fitted into a Top Plate Swivel Castor with 36x36mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/h This popular general purpose castor is fitted with a hard white polypropylene wheel that will not mark or damage the floor. Because this wheel is a hard tread it will offer less rolling and swivelling resistance than a soft rubber tread. This castor is ideal for most domestic and industrial, light duty castor uses where a small yet sturdy castor in needed. -
In Stock75mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS075TPR)
£5.61This apparatu... Read Mores / institutional castor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 75kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock200mm Swivel Castor, 205kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV200RMB)
£21.03200mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres, an overall height of 235mm and a load capacity of 205kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In StockSwivel Castor (Twin Wheel), 200mm, 2000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST200PC2B)
£409.55200mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint. This Castor Has A Top Plate Measuring 200mm X 200mm with Bolt Hole Spacings Of 160mm X 160mm Drilled To 17mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance. The Castor Has A 2000kg Load Rating At 4Km/H -
In Stock60mm Compact Twin Wheel Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball bearing (2KS060PT2B)
£23.4860mm Low Level twin wheel swivel castor with 105x8... Read More0mm Top Plate and 80/76x60mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 2x19mmTread Width (41mm across both wheels) and Ball bearings. Load Capacity = 150kg. The swivel head has a double ball race for excellent swivelling and the polyurethane tyres have a 95 Shore A hardness. -
In Stock80mm Stainless Steel Swivel Castor, 120kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS080PNBBH)
£22.0780mm Bolt Hole Swivel Castor (Stainless Steel Cast... Read Moreor) with 12mm Bolt Hole. Polyurethane Tyre on a White Nylon Centre Wheel with Stainless Steel Roller Bearing. Load Capacity = 120kg -
In Stock97mm Footmaster Levelling Castor, Plate Fitting, 1500kg Capacity | 97mm Nylon Wheel (KGD-150F)
£95.5997mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting. 1500kg Static and 750kg Dynamic Load Capacity. The Die Cast Aluminium Foot Pad is operated by a Hex Adjuster with M20 Leveler (Spanner not included) The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity.
-
In Stock150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Roller Bearing (655RTB)
£94.21150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Rubber Tyre on Cast Iron Centre with a needle roller bearing. Load Capacity = 400kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
-
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (661RNB)
£48.60150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock100mm Swivel Castor, 320kg Capacity | Cast Iron Wheel, Roller Bearing (TSH100CI1H)
£83.46100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 320kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH125PN1B)
£10.86125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Polyurethane Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (422NY)
Original price was: £15.92.£13.16Current price is: £13.16. Sale!100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres and 128mm Overall Height. The Nylon Wheel has a Plain Bore and 32mm Tread Width. Load Capacity = 250kg Nylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most castor wheel material.
-
In Stock125mm Swivel Castor, 500kg Capacity | Cast Iron Wheel, Ball bearing (HKS12520441)
£69.55125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 500kg -
Out of Stock - On the Way80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH080RN1B)
£8.0180mm Single Bolt Hole (12mm) Swivel Castor with Bl... Read Moreue Rubber Tyre Wheel / Nylon Centre and Roller Bearing. Load Capacity = 130kg
