- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (Flexello 461RNB)
£25.48100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel fitted with a Roller Bearing. Load Capacity = 160kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating and has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. The roller bearing consists of steel rollers in a plastic cage that minimise rolling resistance even under heavy loads.
-
In Stock
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Plain Bore (561RN)
£34.53125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 180kg -
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Plain Bore (Flexello 422RN)
£27.16100mm Top Plate Swivel Castor (Heavy Duty Pressed ... Read MoreSteel Frame) with 80X60mm Bolt Hole Centres to suit an 8mm Bolt. The wheel is an Elastic Blue Rubber Tyre on a Nylon Centre with a smooth Plain Bore. The load capacity is 160kg using manual propulsion at 4km/h (walking speed). The Blue Elastic Rubber Tyre is a soft tread and is gentle on floors and non-marking.
-
In Stock125mm Swivel Castor, 325kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561SUB)
£53.61125mm Top Plate Swivel Castor made from Pressed St... Read Moreeel (Flexello Brand) and has a ball bearing swivel race. The Top Plate has four fixing holes to suit 10mm bolts and are slotted to 140/120mm x 105/95mm Bolt Hole Centres. The caster wheel has a Red Polyurethane Tyre on a Cast Iron Centre Wheel with with A 35mm Tread Width and a Needle Roller Bearing. Load Capacity = 325kg -
In Stock60mm Swivel Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0B)
£8.9860mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to a 10mm bolt hole to fit the expander fitting's bolt that is 10mm.
-
In Stock
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (522RNB)
£30.43125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg -
In Stock125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (522PNB)
£29.82125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. The castor wheel has a Red Polyurethane Tyre on a Grey Nylon Centre Wheel with a quality Roller Bearing. The Load Capacity is 250kg using manual propulsion at 4km/h. -
Out of Stock - On the Way50mm Swivel Castor, 60kg Capacity | Nylon Wheel, Plain Bore (2KS050NYPL)
£6.0650mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Bolt Holes. Nylon Wheel with Plain Bore. Load Capacity = 60kg -
In Stock50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PP)
£3.1950mm Swivel Castor with a 4 hole top plate and 48/... Read More38x48/38mm bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg -
In Stock100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Roller Bearing (461NYB)
£13.05100mm Top Plate Swivel Castor (Flexello 61 Series)... Read More with 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel fitted with a Roller Bearing. This is a robust castor with a load Capacity of 270kg using manual propulsion at 4km/h. The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm. -
In Stock125mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Plain Bore (KS125APNBH)
£14.97125mm Single Bolt Hole (12mm) Swivel Castor wit... Read Moreh Red Polyurethane Tyre on a White Nylon Centred Wheel and Plain Bore. The Load Capacity of this castor is 130kg using manual propulsion at 4 km/h.
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. Polyurethane is non-marking and gentle on floors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
-
In Stock100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH100PT1H)
£108.74100mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 340kg Features of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- Power Towable to 6km/h.
-
In Stock75mm Footmaster Castor with Levelling Foot, 700kg Capacity | Nylon Wheel, Ball bearing (KGDL75ASFNYD)
Original price was: £85.44.£51.03Current price is: £51.03. Sale!This 75mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot (GDL-75-ASF-NYD). This castor is a swivel castor with a load capacity of 700kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear. The overall height of the castor is 110mm and the adjustable foot can extend by up to 18mm to enable precise levelling. The load capacity of this product is 700kg and the recommended maximum total load over 4 castors is 2,100kg. -
In Stock125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (522NYB)
£23.84125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock50mm Low Level Swivel Castor, 160kg Capacity | Nylon Wheel, Plain Bore (2SL050NY0L)
Original price was: £18.51.£14.90Current price is: £14.90. Sale!50mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend) with round top plate. The Nylon Wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of this castor is 160kg. This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation. This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes)
