- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock160mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG160PAB)
£54.68160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 500kg -
In Stock150mm Swivel Castor, 500kg Capacity | Cast Iron Wheel, Ball Bearing (KSMG150CIB)
£42.34150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a Cast Iron Wheel with Ball Bearing. Load Capacity = 500kg using manual propulsion at 4km/h (walking speed) Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
-
In Stock50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRPL)
£10.1250mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 46x46mm Fixing Holes. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg -
In Stock100mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS100TPR)
£10.21This apparatu... Read Mores / institutional castor comes with a 100mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR10020241)
£37.18100mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred Wheel with Ball Bearing. Load Capacity = 250kg -
In StockSwivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2B)
£614.98250mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint. This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance. The Castor Has A 2800kg Load Rating At 4Km/H -
In Stock100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel with Single Ball Bearing (MSVH100RN2B)
£10.35100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. -
In Stock150mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS150PNBBH)
£41.92150mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock75mm AGV Swivel Castor, Twin Wheel, 250kg Load | Polyurethane Wheel, Ball bearing (GATD75ASFHUD)
Original price was: £510.48.£197.30Current price is: £197.30. Sale!This Twin wheel ... Read More75mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock200mm Swivel Castor, 400kg Capacity | Black Rubber Tyre Wheel, Ball bearing (MSK200EA2B)
£46.13200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Hole Centres. Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 400kg. Elastic Rubber Tyres have a soft tread and are gentle on floors. They are an excellent choice when a rubber tyre is needed and the weight to be carried is more than what a castor with a standard rubber tyre can hold.
-
In Stock60mm Swivel Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0B)
£8.9860mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to a 10mm bolt hole to fit the expander fitting's bolt that is 10mm.
-
Out of Stock - On the Way97mm Footmaster Levelling Castor, Plate Fitting, 1500kg Capacity | 97mm Nylon Wheel (KGD-150F)
£95.5997mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting (GD-150-F-MCN). 1500kg Static and 750kg Dynamic Load Capacity. The Die Cast Aluminium Foot Pad is operated by a Hex Adjuster with M20 Leveler (Spanner not included) The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity.
-
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (461PNB)
£23.81100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
-
In Stock125mm Stainless Steel Swivel Castor, 600kg Capacity | Nylon Wheel, Plain Bore (33661)
£135.78125mm Heavy Duty Top Plate Swivel Castor and nylon... Read More wheel with a 600kg load capacity. The top plate and frames are made from AISI 304 Stainless Steel Castor and the Stainless Steel balls from AISI 420. This castor has a 172mm overall height. Upgrade your equipment with our 125mm Heavy Duty Stainless Steel Swivel Castor, designed for superior performance in demanding environments. Ideal for both industrial and domestic applications, this castor is built to resist corrosion and heavy use. The swivel head includes a double ball race with a hardened ball race track, ensuring smooth and reliable movement. Key Features:- Load Capacity: Supports up to 600kg, making it ideal for heavy loads.
- Top Plate Dimensions: Measures 135x110mm, with fixing bolt hole centres at 105x80mm and accommodates 12mm bolts for easy installation.
- Wheel Material: The castor features a white nylon (polyamide) wheel with a 45mm tread width, designed to provide non-marking performance.
-
In Stock125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball bearing, (HKS12520241)
£89.17125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 400kg
