- You cannot add that amount to the basket — we have 1 in stock and you already have 1 in your basket. View basket
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock35mm Compact Swivel Castor, 100kg Capacity | 35mm Polyurethane Tyre Wheel, Ball bearing (KS035PT2B)
£11.3635mm Low Level swivel castor with 60x60mm Top Plat... Read Moree and 48/38x48/38mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 52.5mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg -
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSK100PN1B)
£13.12100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KB100NPSBJ300)
£46.95100mm Top Plate Swivel Castor (Pressed Steel) with... Read More brake. 80x60 Hole Centres. Soft Polyurethane Tyre (Shore A 80) / Nylon Centre. Load Capacity = 300kg -
In Stock250mm Swivel Castor, 1200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH250PT1H)
£181.78250mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1200kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG100CRPCB)
£42.61100mm Swivel Castor (Fabricated Steel) with 4 hole... Read More top plate and 105X80mm bolt hole centres. This castor comes with a Crown Tread Polyurethane Tyre on a cast iron centre wheel complete with Ball Bearing. Load Capacity = 300kg using manual propulsion at 4km/h (walking speed). Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Crowned Tread for easy manoeuvrability
-
Out of Stock - On the Way
160mm Swivel Castor, 480kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK160PN2B)
£35.60160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Red Polyurethane Tyre on a White Nylon Centre Wheel with Ball Bearings. Load Capacity = 480kg.
-
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH100PN1B)
£8.28100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a roller bearing fitted into a single bolt hole pressed steel swivel castor bracket. The Swivel Bracket has 12mm single bolt hole. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
-
In Stock125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (561RNB)
£35.96125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105mm Bolt Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg -
In Stock75mm Black Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£62.7575mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100-F-NYN-BLK) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRBH)
£9.1350mm Twin Wheel Single Bolt Hole Swivel Castor (Pr... Read Moreessed Steel) with 10mm Fixing Hole. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg -
In Stock60mm Compact Swivel Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBHBR)
£22.0560mm Low Level swivel with brake castor and 12mm S... Read Moreingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock
63mm Swivel Castor, 60kg Capacity | 63mm Rubber Tyre Wheel, Plain Bore (261RN)
£8.8063mm Swivel Castor (Pressed Steel) with 4-hole top... Read More plate and 76x44.5mm Fixing Bolt Hole Centres and an overall height of 81mm. The wheel has a Blue Elastic Rubber Tyre with a black Nylon Centre, 25mm Tread Width and a smooth Plain Bore. Load Capacity = 60kg. Elastic Blue Rubber tyres are stronger than standard natural rubber. It has a soft tread and is both gentle on floors and non-marking while absorbing fine vibrations when moving which provides user comfort and limits noise. -
In Stock50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRPL)
£10.1250mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 46x46mm Fixing Holes. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg -
In Stock80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSVH080RN2B)
£9.8680mm Single Bolt Hole (12mm) Pressed Steel Swivel ... Read MoreCastor. This castors has an Elastic Blue Rubber Tyred wheel on a Nylon Wheel with a Single Ball Bearing. The Load Capacity is 140kg using manual propulsion at 4km/h. -
In Stock100mm Stainless Steel Swivel Castor, 370kg Capacity | Nylon Wheel, Ball Bearings (33605)
£99.90100mm Heavy Duty Top Plate Swivel Castor and nylon... Read More wheel with ball bearings. The top plate and frames are made from AISI 304 Stainless Steel Castor and the Stainless Steel balls from AISI 420. This castor has a 137mm overall height. Upgrade your equipment with our 100mm Heavy Duty Stainless Steel Swivel Castor, designed for superior performance in demanding environments. Ideal for both industrial and domestic applications, this castor is built to resist corrosion and heavy use. The swivel head includes a double ball race with a hardened ball race track, ensuring smooth and reliable movement. Key Features:- Load Capacity: Supports up to 370kg, making it ideal for heavy loads.
- Top Plate Dimensions: Measures 105x80mm, with fixing bolt hole centres at 80x60mm and accommodates 8mm bolts for easy installation.
- Wheel Material: The castor features a white nylon (polyamide) wheel with a 37mm tread width, designed to provide non-marking performance.
- Precision Bearings: Fitted with two precision ball bearings, this castor offers the lowest rolling and swivel resistance in its class, ensuring effortless movement even under heavy loads.
