- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Plain Bore (Flexello 422RN)
£27.16100mm Top Plate Swivel Castor (Heavy Duty Pressed ... Read MoreSteel Frame) with 80X60mm Bolt Hole Centres to suit an 8mm Bolt. The wheel is an Elastic Blue Rubber Tyre on a Nylon Centre with a smooth Plain Bore. The load capacity is 160kg using manual propulsion at 4km/h (walking speed). The Blue Elastic Rubber Tyre is a soft tread and is gentle on floors and non-marking.
-
In Stock100mm LAG Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23606)
£58.16100mm Top Plate Swivel Castor (LAG Pressed Steel... Read More) with a large Top Plate measuring 135 x 110mm and 105 x 80mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 40mm Tread Width and Ball Bearings. Load Capacity = 300kg -
In Stock125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MSK125NY)
£13.64125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Nylon Wheel with a Smooth Plain Bore. Load Capacity = 250kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. The nylon wheel is insensitive to water and will not mark or damage most flooring.
-
In Stock200mm Swivel Castor, 205kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV200RP)
£21.64200mm Top Plate Swivel Castor with a Grey Rubber T... Read Moreyre wheel on a Nylon Center. It as 105x80mm fixing bolt hole centres and a Load Capacity of 205kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed. -
In Stock125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV125RPBH)
£6.91125mm Grey Rubber Tyre on a nylon centre wheel fit... Read Moreted in a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 100kg load capacity using manual propulsion at 4 km/h. This castor is fitted with a grey rubber tyre that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings -
In Stock100mm Swivel Castor, 320kg Capacity | Cast Iron Wheel, Roller Bearing (TSH100CI1H)
£83.46100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 320kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock240mm Swivel Castor 150kg Load Capacity, Puncture Proof, Pressed Steel Bracket (KS260EVA)
£96.35240mm Puncture Proof Swivel Castor (Pressed Steel)... Read More with 200X160mm Top Plate Dimensions and 150X115mm Fixing Bolt Hole Centres. This Castors has an Overall Height of 297mm. The wheel has an 85mm Tread Width and Roller Bearing. Load Capacity = 150kg. -
In Stock100mm Swivel Castor with 19mm to 21.5mm Round Expander Fitting, 100kg Capacity | Rubber Tyre Wheel (194550)
£13.49100mm Grey Therm... Read Moreoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 19mm - 21.5mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 100kg using manual propulsion at 4km/h. The expander fitting is designed to fit into an round hollow tube with an internal diameter of 19mm to 21.5mm. This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. -
In Stock125mm Swivel Castor, 720kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH125PT1H)
£200.16125mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105X80mm Fixing Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 720kg -
In Stock100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH100PT2H)
£103.68100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor Bracket) with 105x80mm Fixing Hole Centres. The castor houses a Polyurethane Tyre Wheel on a Cast Iron Centre with two quality Ball Bearings for extremely low rolling resistance on heavy loads. The load capacity of this 100mm castors is 340kg.
Features of the Revvo H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock100mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NY)
£17.71100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Fixing Hole Centres. This castor has a White Nylon Wheel with a Smooth Plain Bore. The Load Capacity is 150kg using manual propulsion at 4km/m (walking Speed). Key Specifications- Top Plate Size: 100x85mm
- Bolt Hole Centres: 80x60mm
- Bolt Hole Size: 8.5x12mm (suits 8mm Fixing Bolts)
- Offset: 37mm
- Overall Height: 128mm
- Stainless Steel Grade: AISI 304
-
In Stock75mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball bearing (PH75NSF)
Original price was: £37.12.£34.81Current price is: £34.81. Sale!75mm Low Level Swivel Castor with 78/64x78/64mm... Read More slotted bolt holes and a 500kg Load Capacity. This castor has a black painted finish and is fitted with an extra heavy duty Cast Nylon Wheel that turns on ball bearings.
This castor is ideal for heavy duty applications where there is an height restriction and the White nylon wheel is non-marking and wont damage concrete floors.
-
In Stock63mm Swivel Castor, 60kg Capacity | 63mm Rubber Tyre Wheel, Plain Bore (261RNST)
Original price was: £12.31.£9.46Current price is: £9.46. Sale!63mm Threaded Stem Fitting Swivel Castor (Pressed ... Read MoreSteel) with M12x25mm Threaded Stem and an overall height of 81mm. The wheel has a Blue Elastic Rubber Tyre with a Black Nylon Centre, 25mm Tread Width and a Smooth Plain Bore. Load Capacity = 60kg. Elastic Blue Rubber tyres are stronger than standard natural rubber. It has a soft tread and is both gentle on floors and non-marking while absorbing fine vibrations when moving which provides user comfort and limits noise. -
In Stock100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321768)
£14.42100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock
160mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV160RP)
£19.76160mm Top Plate Swivel Castor with a Grey Rubber T... Read Moreyre wheel on a Nylon Center. It as 105x80mm fixing bolt hole centres and a Load Capacity of 135kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed.
