- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
Out of Stock - On the Way200mm Swivel Castor, 1500kg Capacity | Nylon Wheel, Ball Bearing (TSH200NY2H)
£144.43200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 1500kg Features of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- Power Towable to 6km/h.
-
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (461PAB)
£32.75100mm Top Plate Swivel Castor with 105x80mm Bolt H... Read Moreole Centres. Polyurethane Tyre / Aluminium Centre Wheel with Ball Bearings. The Load Capacity is 300kg using manual propulsion at 4km/h. Key Specifications:- Top Plate Size: 128x102mm
- Bolt Hole Centres: 100/105mm x 76/60mm
- Overall Height: 125mm
- Offset: 26mm
- Wheel Material: Polyurethane Tyre (94 Shore A) / Aluminium Centre
- Bearing Type: Ball Bearings
-
In Stock130mm Shock Absorbing Swivel Castor, 350kg Capacity | 130mm Polyurethane Tyre Wheel (GDS13075SF)
£143.19130mm Shock Absorbing Swivel Castor (GDS130ASFHUD)... Read More, Polyurethane tyre on Aluminium Centre, Load Capacity = 350kg. Overall height without load = 200mm. Overall height reduces incrementally up to 30mm as load increases (see image 2 - GDS130 Compression Curve) and is fully compressed with a load of 120kg. -
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK100PC2B)
£54.89100mm Top Plate Swivel Castor (Heavy Gauge Pressed... Read More Steel) with an Orange Polyurethane Tyre on a Cast Iron Centre Wheel with Dual Ball Bearings. The Load Capacity is 300kg using manual propulsion at 4km/h (walking speed) Key Specifications:- Top Plate Dimensions: 105x85mm
- Bolt Hole Centres: 80x60mm
- Bolt Hole Size: 9mm (to suit M8 Fixing Bolts)
- Overall Height: 130mm
- Offset: 45mm
- Swivel Radius: 95mm
- Wheel Material: Orange Polyurethane Tyre on a Cast Iron Centre
- Tyre Hardness: 95 Shore A
- Wheel Tread Width: 40mm
- Bearing Type: Ball Bearings
- Heavy Gauge Steel: 5mm Top Plate / 4mm Bracket
- High Load Capacity Wheel
- Quiet Operation
- Gentle on Floors
-
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.75125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock100mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV100RMB)
£6.63100mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 80x60mm fixing bolt hole centres and the load capacity is 70kg using manual propulsion at 4km/h This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed.
-
Out of Stock - On the Way80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH080RN1B)
£8.0180mm Single Bolt Hole (12mm) Swivel Castor with Bl... Read Moreue Rubber Tyre Wheel / Nylon Centre and Roller Bearing. Load Capacity = 130kg -
In Stock100mm Swivel Castor, 320kg Capacity | Cast Iron Wheel, Roller Bearing (TSH100CI1H)
£83.46100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 320kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock50mm Swivel Castor, 54kg Capacity | Nylon Wheel, Plain Bore (961NY)
£3.5850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 54kg -
In Stock150mm Twin Wheel Swivel Castor, 1240kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH150PT15)
£249.90150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105x80mm Fixing Bolt Hole Centres. This castor comes with two high quality Polyurethane Tyre Wheels with a Cast Iron Centre complete with Roller Bearing. Load Capacity = 1240kg. Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: 105mm x 80/75mm
- Overall Height: 202mm
- Tread Width: 38mm (each wheel)
- Bearing Type: Needle Roller Bearing
-
In Stock100mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG100EAB)
£30.98100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. The castor wheel is a Black Rubber Tyre on an Aluminium Centre with Ball Bearing. Load Capacity = 200kg using manual propulsion at 4km/h (walking speed). Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Elastic rubber tyre castor wheels have a higher load capacity and lower rolling resistance (easier to get moving) than normal rubber tyre. They have a high resistance to wear and offer excellent running and operating comfort.
-
In Stock50mm Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60F)
£32.5650mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load (GD-60-F-NYN) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock300mm Swivel Castor, 1800kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS300PCB1800A)
£306.76300mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1800kg -
In Stock150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (661PNB)
£49.78150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 600kg -
In Stock160mm Swivel Castor, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160BRP1B)
£16.16160mm Top Plate Swivel Castor. The castor wheel ha... Read Mores a Black Rubber Tyre on a Black Polypropylene (Plastic) Centre Wheel with Roller Bearing. The Load Capacity is 135kg using manual propulsion at 4km/h. Key Specifications:- Plate Size: 135X110mm
- Bolt Hole Centres: 105x80/75mm
- Bolt Hole Size: 11mm (suits 10mm fixing bolts)
- Overall height: 196mm
- Offset: 55mm
- Swivel Radius: 135mm
- Bearing Type: Roller Bearing
