Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 45 Products per page
- In Stock
75mm Stainless Steel Swivel Castor, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATS075TPR)
£8.63This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/hThe grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors.Download Series Data Sheet here - In Stock
100mm Swivel Castor, 320kg Capacity | Cast Iron Wheel, Roller Bearing (TSH100CI1H)
£80.63100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 320kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
80mm High Temperature Swivel Castor, 100kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX080HTBH)
£19.0180mm Single Bolt Hole Swivel Castor (Pressed Steel... Read More) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 100kg - In Stock
160mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH160NY1B)
£17.09160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel) and Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
125mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT125ASFHUD)
£236.14125mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1100kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- Out of Stock - On the Way
125mm Swivel Castor, 1500kg Capacity | Cast Nylon Wheel, Ball bearing (GXT125ASFMCD)
£200.42125mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- In Stock
75mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV075RPBH)
£3.53This castor c... Read Moreomes with a 75mm Grey Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 70kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- Out of Stock - On the Way
125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNB)
£29.53125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - Out of Stock - On the Way
300mm Swivel Castor, 4080kg Capacity | Polyurethane Tyre Wheel, Taper Roller (EH312SUTM)
£1,309.22Extra Heavy Duty Swivel Castor with 300mm Polyu... Read Morerethane Tyre Cast Iron wheel on taper roller bearings. The swivel head contains double taper roller bearings which means it is suited to very heavy applications and with a grease nipple in the swivel head enables re-greasing. The bracket is fabricated forge steel and coated with a black electrostatic finish. The load capacity of this castor is 4,080kg and is suitable for power towing,
The castor has an overall height of 422mm and the top plate measures 178mm x 153mm with bolt hole centres of 127mm x 102mm that are suitable for 16mm bolts, The swivel radius of the castor is the radius of the circle the outer dimension of the wheel would make when swivelling in a stationary position. This is 222mm for this product.
- In Stock
125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSK125RN1B)
£20.46125mm Top Plate Fixed Castor (Pressed Steel) with ... Read More80x60mm Hole Centres and 157mm overall height. The Blue Elastic Rubber Tyre wheel on a Nylon Centre contains a roller bearing and has a 40mm Tread Width. Load Capacity = 250kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.Blue elastic rubber tyres provide the benefits of a rubber tyre wheel such as being gentle on floors and absorbing fine vibrations but they can hold more weight and are non-marking. They are a great solution if you need a rubber tyre wheel but the load being carried is too much for a castor with a standard rubber tyre wheel. - In Stock
200mm Swivel Castor, 6000kg Capacity | Machine Cast Nylon Wheel, Ball bearing (UGXT200ASFMCQ)
£777.27200mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a grease nipple in the swivel head. The bolt holes centres are 210x160mm bolt hole centres and the load capacity is 6,000kg. This castor is Power Towable to 4km/h
This super heavy duty high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
- In Stock
125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV125PN2B)
£12.60125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 200kg - In Stock
125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Ball bearing, (HKS12520341)
£84.89125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Elastic Rubber Tyre / Aluminium Centre Wheel with Ball bearing. Load Capacity = 250kg - In Stock
200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£78.72200mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- In Stock
125mm Swivel Castor, 630kg Capacity | Cast Iron Wheel, Roller Bearing (TSH125CI1H)
£85.54125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 630kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
160mm Swivel Castor, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160GRP1B)
£15.41160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Bolt Hole Centres. Grey Non-Marking Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 135kg - Out of Stock - On the Way
100mm Swivel Castor, 300kg Capacity | Cast Iron Wheel, Roller Bearing (KSMG100CIB)
£27.44100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. The wheel is a solid Cast Iron Wheel with a Needle Roller Bearing. Load Capacity = 300kg - Out of Stock - On the Way
200mm Swivel Castor, 500kg Capacity | Nylon wheel, Roller Bearing (MSK200NY1B)
£33.98200mm Heavy Duty Swivel Castor (Pressed Steel) wit... Read Moreh 105x80mm Fixing Bolt Hole Centres. This castor has an overall height of 240mm and houses a White Nylon Wheel with a 50mm Tread Width and a Needle Roller Bearing. The Load Capacity is 500kg using manual propulsion at 4km/w (walking speed). - In Stock
150mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT150ASFHUD)
£246.37150mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes incorporate the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NY)
£17.11100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Bolt Hole Centres and 128mm overall height. White nylon caster wheel with 30mm Tread Width and Smooth Plain Bore. Load Capacity = 150kg - Out of Stock - On the Way
- In Stock
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Plain Bore (661RN)
£38.32150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 300kg - In Stock
100mm Heavy Duty Swivel Castor, 500kg Capacity | White Nylon Wheel, Ball Bearing (HSV100NY2B)
£26.14100mm Heavy Duty Top Plate Swivel Castor with Heav... Read Morey Gauge Pressed Steel and a load capacity of 500kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 37mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.
- In Stock
63mm Footmaster Castor with Levelling Foot, 500kg Capacity | 63mm Nylon Wheel, Plain Bore (KGDL65ASFNYN)
Original price was: £60.88.£38.39Current price is: £38.39. Sale!This 63mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot. This castor is a swivel castor with a load capacity of 500kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The overall height of the castor is 98mm and the adjustable foot can extend by up to 18mm to enable precise levelling.The load capacity of this product is 500kg and the recommended maximum total load over 4 castors is 1,500kg. - Out of Stock - On the Way
125mm High Temperature Swivel Castor, 150kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX125HTBH)
£31.55125mm Single Bolt Hole Swivel Castor (Pressed Stee... Read Morel) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 125kg - In Stock
160mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH160PN1B)
£22.44160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Polyurethane Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
100mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG100PCB)
£40.30100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 350kg - In Stock
80mm High Temperature Swivel Castor, 100kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX080HT)
£16.6980mm Swivel Castor (Pressed Steel) with 80x60mm Bo... Read Morelt Hole Centres, 108mm Overall Height and High Temperature Black Phenolic Wheel with 35m Tread Width and Smooth Plain Bore. This castor is Rated to +280 degrees C. and has a Load Capacity of 100kg - In Stock
160mm Swivel Castor, 300kg Capacity | Nylon Wheel, Roller Bearing (MSV160NY1B)
£20.13160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 300kg - In Stock
50mm Shock Absorbing Swivel Castor, 40kg Capacity | Polyurethane Tyre Wheel (GDS05065SF)
Original price was: £45.02.£29.27Current price is: £29.27. Sale!50mm Shock absorbing Swivel Castor with Top plate ... Read Moremeasuring 55x55mm and 42x42mm fixing bolt holes centres to suit 6mm fixing bolts. The wheel as a soft (Shore 80A) polyurethane tyre for high elasticity and is fitted with a precision ball bearing. This castor has as load capacity of 40kg.The Top Plate is made from pressed steel and has a double ball race with hardened bearing seats in the swivel head for smooth swivel rotation. The frame is aluminium. The parts have powder coated and zinc plated for protection.The shock absorbing functions means that the overall height can vary by 10mm. The castor's height without load is 100mm and this reduces incrementally by up to 10mm as the load increases providing up t0 10mm of compression for a fine shock absorbing function. - In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£60.6275mm Foot Master Levelling Castor with an Black... Read More powder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation
This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- In Stock
35mm Compact Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBH)
£9.9435mm Low Level swivel castor with 10mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
200mm Swivel Castor, 450kg Capacity | Rubber Tyre Wheel, Roller Bearing (822RNB)
£60.16200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre wheel on a Nylon Centre with a Needle Roller Bearing. Load Capacity = 450kg - In Stock
150mm AGV Swivel Castor, Twin Wheel, 630kg Capacity | Polyurethane Wheel, Ball bearing (GASD150ASFHUD)
£707.56This Twin wheel ... Read MoreAutomated Guided Vehicle (AGV) Castor with 150m diameter wheels has shock absorbing function and a bracket made from strong Forged steel that is zinc plated. There is double thrust bearing in the swivel head to achieve a high load capacity and maintain castor performance and durability.The role of the spring in an AGV castor is different to that of a standard shock absorbing castor. In a standard shock absorbing castor, the spring absorbs shock and noise whereas, it's role in a AGV castor is primarily to keep the wheels in contact with the floor.When determining the overall height requirement of a shock absorbing AVG, it should be designed based on the spring cushion being fully compressed.The shock absorbing pad made from a special rubber compound absorbs minor shocks and vibrations to protect the AGV unit. There is a 10mm range of compression which helps prevent the castors from losing contact with the floor which may be caused by small floor imperfections. An AGV's castor leaving the floor when changing directions is often the cause of the AGV becoming unbalanced and coming to a stop by straying off its designated path.The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameterThis castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, Having a twin wheel castor is great for reducing the effort required to swivel the castor and most efficient by reducing the amount of room the castor needs to turn the AGV Cart.The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. - In Stock
200mm Swivel Castor, 600kg Capacity | Cast Iron Wheel, Ball Bearing (KSMG200CIB)
£55.40200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball Bearing. Load Capacity = 600kg - In Stock
100mm Swivel Castor with 21.5mm to 24mm Expander Fitting, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (194551)
Original price was: £7.30.£7.09Current price is: £7.09. Sale!... Read Morefont-weight: bold;">Excess Project Stock: 100mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 21.5mm - 24.5mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 100kg using manual propulsion at 4km/h.
The expander fitting is designed to fit into an round hollow tube with an internal diameter of 21.5mm to 24.5mm.
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
- In Stock
200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Roller Bearing (KSMG200NYB)
£35.16200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
80mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSVH080PN2B)
£8.9080mm Single Bolt Hole (12mm) Pressed Steel Swivel ... Read MoreCastor. This castor has Polyurethane Tyred wheel on a Nylon Centred with a Single Ball Bearing. The Load Capacity is 130kg using manual propulsion at 4km/h. - In Stock
63mm Stainless Steel Footmaster Levelling Castor, 550kg Load Capacity (KSGDN-80S)
Original price was: £133.69.£129.80Current price is: £129.80. Sale!63mm Footmaster castor with Stainless forged steel... Read More plate and stainless casting frame, M12 x 18mm Threaded Stem Fitting. 550kg Static Load and 275kg Dynamic Capacity with Machine Cast Nylon Wheel and Vibration Damping Rubber Pad. Nylon Handwheel height adjustment Operation. This footmaster castor has an overall height of 103mm when the wheel is engaged with a total lift of 15mm using the rubber footpad.The version of the Footmaster Levelling castor has a double ball bearing with hardened stainless steel bearings in the swivel head. The KSGDN Footmaster castor has completely corrosion-resistant components applied.The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place.Because of the lifting and lowering function of the Footmaster castor, like regular Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load for each Footmaster Castor is half the castor's Static Load Capacity of when the castor is stationary and the foot-pads are lowered.This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity. - In Stock
75mm Footmaster Levelling Castor, Stem Fitting, 100kg Capacity | Nylon Wheel (KGD-120S)
£65.4775mm Footmaster Levelling Castor with M16x 24mm... Read More Stem Fitting. 1000kg Static and 500kg Dynamic Load Capacity. Die Cast Aluminium Foot Pad. Hex Adjuster with M16 Leveler (Spanner not included)
The Foot Master levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity.
- In Stock
50mm Low Level Swivel Castor, 270kg Capacity | Steel Wheel, Plain Bore (2SL050ST0L)
£27.7850mm Low Level Twin Wheel Swivel Castor (Revvo Bra... Read Morend). The steel wheels each have a tread width of 14mm and turn on a smooth Plain Bore. The Load Capacity of 270kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
50mm Footmaster Levelling Castor, Stem Fitting, 280kg Capacity | Nylon Wheel (KGD-60SBLACK)
£30.43M12 x 18mm Threaded Stem Fitting Foot Master Level... Read Moreling Castor with a black powder coating finish. This product has a black Nylon Wheel with a 25mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (422NYB)
£20.16100mm Top Plate Swivel Castor (Flexello Brand - Pr... Read Moreessed Steel) with 80x60mm Fixing Bolt Hole Centres. White Nylon Wheel with Roller Bearing. Load Capacity = 250kgNylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most castor wheel material.The wheel has a roller bearing in the hub (central part of the wheel) which consists of rollers made of steel within a cage. These rollers rotate between the axle tube and the wheel hub. This makes the rolling resistance of the bearing relatively slight, even under heavy loads. Roller bearings are rugged, robust and largely maintenance-free. - In Stock
75mm AGV Swivel Castor, Twin Wheel, 250kg Load | Polyurethane Wheel, Ball bearing (GATD75ASFHUD)
£436.04This Twin wheel ... Read More75mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter.The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.