Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Popularity (sales)
- Display 15 Products per page
In Stock80mm Swivel Castor Threaded Stem, 90kg Capacity | Blue Rubber Tyre wheel, Plain Bore (K361RNST)
£10.8780mm Stem Fitting Swivel Castor w... Read Moreith M12x25mm Threaded Stem. Blue Rubber Tyre Wheel with a Nylon Centre and Plain Bore. The Load Capacity of this castor is 90kg at 4km/h using manual propulsion.This castor has a ball bearing swivel head and finished with a bright zinc plating.Key Specifications:- Threaded Stem Size: M12x25mm
- Overall Height: 95mm
- Wheel Material: Blue Elastic Rubber Tyre on a Black Nylon Centre
- Swivel Radius: 64.5mm
- Out of Stock - On the Way
40mm Swivel Castor, 15kg Capacity | Rubber Tyre Wheel, Plain Bore (YS040RP15KP)
£2.2340mm Grey Rubber... Read More Tyre Wheel on a nylon centre fitted into a Top Plate Swivel Castor with 27x27mm bolt hole centres. The load capacity of this castor is 15kg using manual propulsion at 4km/hThis popular general, light duty purpose castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed. - In Stock
75mm Footmaster Levelling Castor, Stem Fitting, 800kg Capacity | Nylon Wheel (KGD-100S)
£52.1675mm Foot Master Levelling Castor with M16 x 24mm ... Read MoreThreaded Stem Fitting finished in an ivory coloured powder coating finish. This product has a black Nylon Wheel with a 30mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100-S-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
63mm Footmaster Castor with Levelling Foot, 500kg Capacity | 63mm Nylon Wheel, Plain Bore (KGDL65ASFNYN)
Original price was: £65.23.£39.74Current price is: £39.74.Sale!This 63mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot (GDL-65-ASF-NYN). This castor is a swivel castor with a load capacity of 500kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The overall height of the castor is 98mm and the adjustable foot can extend by up to 18mm to enable precise levelling.The load capacity of this product is 500kg and the recommended maximum total load over 4 castors is 1,500kg. - In Stock
100mm Swivel Castor | Polyurethane Tyre Wheel, Roller Bearing, 180kg Capacity (MSZ100PN1B)
£12.82100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 180kg using manual propulsion at 4km/h (walking speed)Key Specification:- Top Plate Size: 105x80mm
- Bolt Hole Centres: 80/76X60mm
- Bolt Hole Size: 9mm (to suit M8 Fixing Bolts)
- Overall Height: 125mm
- Offset: 36mm
- Swivel Radius: 86mm
- Tread width: 34mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
- In Stock
80mm High Temperature Swivel Castor, 100kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX080HT)
£17.2880mm Swivel Castor (Pressed Steel) with 80x60mm Bo... Read Morelt Hole Centres, 108mm Overall Height and High Temperature Black Phenolic Wheel with 35m Tread Width and Smooth Plain Bore. This castor is Rated to +280 degrees C. and has a Load Capacity of 100kg - In Stock
80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV080RN2B)
£8.9880mm Blue Elastic Rubber Tyre wheel on a nylon cen... Read Moretre with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors. The rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.</p> - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NYBH)
£19.31100mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NY)
£17.71100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Fixing Hole Centres. This castor has a White Nylon Wheel with a Smooth Plain Bore. The Load Capacity is 150kg using manual propulsion at 4km/m (walking Speed).Key Specifications- Top Plate Size: 100x85mm
- Bolt Hole Centres: 80x60mm
- Bolt Hole Size: 8.5x12mm (suits 8mm Fixing Bolts)
- Offset: 37mm
- Overall Height: 128mm
- Stainless Steel Grade: AISI 304
- In Stock
75mm Stainless Steel Swivel Castor (BH), 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKABS075TPR)
£9.34This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 10mm Single Bolt Hole. The load capacity of this castor is 75kg using manual propulsion at 4km/hThe grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors.Download Series Data Sheet here - In Stock
100mm High Temperature Swivel Castor, 125kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX100HTBH)
£18.31100mm Single Bolt Hole Swivel Castor (Pressed Stee... Read Morel) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 125kg - In Stock
150mm Swivel Castor, 500kg | Polyurethane Tyre Wheel, Roller Bearing (622PNB)
£38.51150mm Top Plate Swivel Castor (Flexello) with 105X... Read More80mm Fixing Bolt Hole Centres and a 188mm Overall Height. The Castor Wheel has a Red Polyurethane Tyre on a White Nylon Centre Wheel With a 45mm Tread Width and a needle Roller Bearing. Load Capacity = 500Kg using manual propulsion at 4km/h. - Out of Stock - On the Way
125mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSV125NY1B)
£10.59125mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- In Stock
50mm Compact Swivel Castor, 150kg Capacity | 50mm Polyurethane Tyre Wheel, Ball bearing (KS050PT2B)
£15.6550mm Low Level swivel castor with 90x66mm Top Plat... Read Moree and 75/61x51/45mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 73mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
80mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSZH080PN1B)
£7.1880mm Single Bolt Hole (12mm) Swivel Castor (Presse... Read Mored Steel). Polyurethane Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 130kg using manual propulsion at 4km/h.
