- Sorry, this product cannot be purchased.
- Display 15 Products per page
-
In Stock200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822SUB)
£103.73200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg -
In StockDesigner Polyurethane Tyre Wheel 300mm | Polyurethane Tyre / Cast Iron, 2800kg, 50mm Plain Bore Keywayed (30075PTU50)
£401.96300mm Polyurethane (Premium Grade REVVOTHANE) T... Read Moreyred / Cast Iron Centre Wheel with 50mm Keywayed Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock100mm Swivel Castor with Brake, 250kg Capacity | Nylon Wheel, Roller Bearing (422NYBTSB)
£31.14100mm Swivel Castor with Swivel & Wheel Brake ... Read More(Pressed Steel frame). The top plate has 80x60mm Bolt Hole Centres and 128mm Overall Height. The White Nylon Wheel has a tread width of 32mm and contains a Roller Bearing. Load Capacity = 250kg Nylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most popular castor wheel material. The roller bearing in the hub (central part of the wheel) consists of steel rollers within an impact resistant plastic cage. These rollers rotate between the axle tube and the wheel hub which reduces the rolling resistance making it easy to move even under heavy loads. Roller bearings are rugged, robust and largely maintenance-free.
-
In Stock6000-2RS Dual Rubber Sealed Ball Bearing 10mm x 26mm x 8mm (60002RS)
£1.85The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 10mm
- Outer Diameter: 26mm
- Width: 8mm
-
In Stock150mm Swivel Castor with Brake, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HBT150PC2B)
£116.48150mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Locking both the swivel head and the wheel). This fabricated castor is coated in Black paint and the top plate has 120x60mm or 105x80mm Slotted Hole Centres. The wheel has a Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings and the load capacity is 700kg at 4km/h (walking speed) using manual propulsion -
In Stock75mm Footmaster Castor with Levelling Foot, 700kg Capacity | Nylon Wheel, Ball bearing (KGDL75ASFNYD)
Original price was: £85.44.£51.03Current price is: £51.03. Sale!This 75mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot (GDL-75-ASF-NYD). This castor is a swivel castor with a load capacity of 700kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear. The overall height of the castor is 110mm and the adjustable foot can extend by up to 18mm to enable precise levelling. The load capacity of this product is 700kg and the recommended maximum total load over 4 castors is 2,100kg. -
In Stock100mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSVH100NY2BSWB)
£10.41100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor with Swivel and Wheel Brake. This castor has Nylon Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. -
Out of Stock - On the Way125mm Swivel Castor with Brake, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (DBRN12511030)
Original price was: £13.14.£12.32Current price is: £12.32. Sale!125mm Top Plate Swivel Castor And Swivel & Whe... Read Moreel Brake (Pressed Steel) With 80X60mm Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel With Roller Bearing. Load Capacity = 200Kg -
In Stock160mm Swivel Castor with Brake, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160BRP1BSWB)
£17.82160mm Top Plate Swivel Castor with Swivel & Wh... Read Moreeel Brake (Pressed Steel). The castor wheel has a Black Rubber Tyre on a Black Polypropylene (Plastic) Centre Wheel with Roller Bearing. The Load Capacity is 135kg using manual propulsion at 4km/h. Key Specifications:- Plate Size: 135X110mm
- Bolt Hole Centres: 105x80/75mm
- Bolt Hole Size: 11mm (suits 10mm fixing bolts)
- Overall height: 196mm
- Offset: 55mm
- Swivel Radius: 165mm
- Bearing Type: Roller Bearing
- Brake Type: Swivel & Wheel Brake (also known as a Total Stop Brake because it locks both the swivel action and wheel when applied)
-
In Stock160mm Fixed Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (MFK160NY2B)
£27.75160mm Top Plate Fixed Castor (Pressed Steel) with ... Read More105x80mm Fixing Bolt Hole Centres. Nylon Wheel with a 50mm Tread Width and Ball Bearings. Load Capacity = 500kg. This castor is made from 4mm thick heavy gauge pressed steel. It is a product that is built to last and is great for arduous applications. The white nylon castor wheel is a hard tread and contains Ball Bearings which ensures the lowest rolling resistance. Nylon is probably the most popular wheel used because it is relatively inexpensive, strong and long lasting. It is unaffected by water and resistant to most chemicals except acids and chlorines.
-
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNB)
£30.57125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock100mm Swivel Castor, 80kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV100RPBH)
£6.10100mm Grey Rubber Tyre wheel with a polypropyle... Read Morene centre fitted into a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a grey rubber tyre that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock100mm AGV Swivel Castor, Twin Wheel, 310kg Load | Polyurethane Wheel, Ball bearing (GATD100ASFHUD)
Original price was: £569.41.£220.07Current price is: £220.07. Sale!This Twin wheel ... Read More100mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In StockAdjustable Feet, Tilting, M10 x 100mm Stem, 250kg Load Capacity, 47.5mm Base (GL47.5XM10X100T)
£2.25Tilting Adjustable Levelling Feet with M10 x 100mm... Read More Stem and 47.5mm Base Diameter (20mm Base Height). Maximum Tile Angle = 20 Degrees. Load Capacity = 250kg -
In StockPuncture Proof Wheel 400mm | Puncture Proof Tyre / Red Polypropylene Centre, 200kg, 35mm Plain Bore (PP400RP0)
£74.66400mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Block Tread on a Red Polypropylene Centre. This size wheel is often referred to as a 16" or 16 Inch Wheel and has a 35mm Plain Bore, 100mm Tread Width, 61mm Hub Length, and 200kg Load Capacity
