- Display 15 Products per page
In Stock60mm Swivel and Brake Castor, 120kg Capacity | Nylon Wheel, Plain Bore (MSVH060NY0BSWB)
£12.6560mm Single Bolt Hole Swivel Castor to suit 12m... Read Morem bolt. This castor comes with a Swivel and Wheel Brake that locks both the wheel and the swivel head. The castor bracket is made from pressed steel and houses a solid nylon Wheel with a plain bore (without a bearing).
This castor's load capacity is rated to 120kg using manual propulsion at 4km/h making it a great castor choice for most applications that require a small castor.
This single bolt hole castor can be fitted with an expander fitting and requires a ACZ500 bolt hole reducer to reduce the 12mm bolt hole to 10mm for the expander fittings bolt that is 10mm.
- In Stock
Guide Roller, 50mm X 20mm, Polyurethane Tyre, 12mm Ball Bearing, 60kg (KGR5020PTB12)
£13.7650mm Guide Roller with a 20mm Tread Width with a s... Read Moreingle 12mm shielded ball bearing (6201ZZ). The guide wheel's tyre is polyurethane (92 Shore A Hardness) with a Load Capacity of 60kg. - In Stock
200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£81.48200mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- In Stock
80mm Swivel Castor with Brake, 70kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080GRP1BSWB)
£7.7880mm Grey Rubber Tyre wheel on a plastic centre... Read More with a roller bearing fitted into a pressed steel swivel and brake castor bracket. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 70kg using manual propulsion at 4km/h (walking speed)
The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon. The rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head, this castors a great choice for many industrial or domestic applications.
- In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 725kg, 20mm Roller Bearing (WSU6RBM20)
£63.99150mm Polyurethane Tyre on a Cast Iron Centre W... Read Moreheel with a 20mm Roller Bearing (Flexello). Load Capacity = 725kg
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making it smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required start the wheel rolling.
- Out of Stock - On the Way
250mm Swivel Castor with Brake, 1500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS250PCB1500SWB)
£312.69250mm Top Plate Swivel Castor and Swivel & Whe... Read Moreel Brake (Industrial Castor) with 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1500kg - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK200PN2B)
£48.52200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Nylon Centre Wheel with Ball Bearings. Load Capacity = 500kg. - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822PNB)
£59.07200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 500kg - Out of Stock - On the Way
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 30mm Plain Bore (20060PT030)
£168.88200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Swivel Castor with Brake, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822SUBTSB)
£117.35200mm Top Plate Swivel Castor and Swivel & Whe... Read Moreel Brake (Pressed Steel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
125mm Swivel Castor, 360kg Capacity | Nylon Wheel, Plain Bore (561NY)
£25.52125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105mm Bolt Hole Centres. This castor houses a white Nylon Wheel with a smooth Plain Bore and has a Load Capacity of 360kg using manual propulsion at 5km/h (walking speed) - In Stock
160mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK160PC2B)
Original price was: £70.91.£56.73Current price is: £56.73.Sale!160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Castor Wheel with Ball Bearings. Load Capacity 600kg using manual propulsion at 4km/h.This castor is made from 4mm thick heavy gauge pressed steel. It is a product that is built to last and is great for arduous applications.The polyurethane elastomer wheel offers excellent elasticity, hardness and resistance to compression. This means that while it has a low rolling resistance it is also gentle on floors and absorbs some of the rolling vibration for user comfort and reduced noise. - In Stock
150mm Swivel Castor, 725kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (655SUB)
Original price was: £145.52.£112.48Current price is: £112.48.Sale!150mm Top Plate Swivel Castor. The 4 hole top plat... Read Moree measures 162mm x 140mm with 140mm x 105mm Fixing Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Polyurethane Tyre on Cast Iron Centre with a needle roller bearing. Load Capacity = 725kg.The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head. - In Stock
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.75125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
Swivel Castor, 250kg Capacity | 100mm Cast Iron Wheel with Plain Bore (422CI)
£24.73100mm Swivel Castor (Flexello) with 80x60mm Fixing... Read More Bolt Hole Centres. This castor is fitted with Cast Iron Wheel with Smooth Plain Bore. 250kg Load Capacity
