- Display 15 Products per page
- In Stock
Pallet Roller, 82mm X 80mm, Nylon, Without Bearing (47x14mm Bearing Seat), 680kg (KR8280NY)
£10.7382mm X 80mm Nylon Pallet Roller sold without beari... Read Morengs and has a 47mm x 14mm bearing seat. Load Capacity = 680kg - In Stock
Designer Polyurethane Tyre Wheel 200mm | Polyurethane Tyre / Cast Iron, 1300kg, 30mm Plain Bore (20060PT030)
£181.53200mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
200mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH200PT15)
£287.07200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1500kg - In Stock
125mm Swivel and Brake Castor, 100kg Capacity | Polypropylene Wheel, Plain Bore (LSV125PPBHBR)
£9.29125mm White Polypropylene wheel fitted in a 12m... Read Morem Single Bolt Hole Swivel and Brake Castor (Pressed Steel castor frame). This castor has a 100kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
Adjustable Feet, Rigid, M8 x 25mm Stem, 250kg Load Capacity, 30mm Base (GL30XM8X25R)
£0.71Rigid Adjustable Levelling Feet with M8 x 25mm Ste... Read Morem and 30mm Base Diameter (16mm Base Height). Load Capacity = 250kg - In Stock
Puncture Proof Wheel 300mm | Puncture Proof Tyre / Red Steel Centre, 150kg, 20mm Roller Bearing (PP300RSB20D)
£60.09300mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) on a Red Steel Centre. This Wheel has a 20mm Roller Bearing, 100mm Tread Width, 65mm Hub Length, and 150kg Load Capacity - In Stock
Ball Transfer Unit, 30mm Load Ball, 300kg Load Capacity (K30BTU)
£13.1030mm Ball Transfer Unit. "Drop-In" model with Chro... Read Moreme steel load ball case hardened for durability. Suits 46mm Seating Hole. Load Capacity = 300kg. Supplied with Spring Clip. Check 2D Image for Dimensional Data. - In Stock
150mm Swivel Castor, 370kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH150RU15)
£91.95150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 370kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
125mm High Temperature Swivel Castor, 150kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX125HT)
£33.09125mm High Temperature Swivel Castor (Pressed Stee... Read Morel). The top plate has four fixing holes with 80x60mm Bolt Hole spacing and the wheel is made from black phenolic resin with a smooth plain bore. It is Rated to +280 degrees C and has a load capacity of 150kg - In Stock
150mm Fixed Castor, 910kg Capacity | Cast Iron Wheel, Ball Bearing (TFH150CI2H)
£71.70150mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor) with 105x80 Hole Centres. Cast Iron Wheel with Ball Bearing. Load Capacity = 910kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- In Stock
Castor Wheel 125mm | Polyurethane Tyre / Nylon Centre, 300kg, 15mm Plain Bore (WPN5M15)
£14.94125mm Polyurethane Tyred Castor Wheel with a Grey ... Read MoreNylon Centre and 15mm Smooth Plain Bore. Load Capacity = 300kg - In Stock
200mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH200NY1B)
£21.18200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.794 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
- In Stock
150mm Swivel Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (TSH150NY2H)
£108.29150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 800kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181