- Display 15 Products per page
In StockHeaded Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm.The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length).The total length of the product is 15mm.- In Stock
35mm Compact Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBH)
£10.2935mm Low Level swivel castor with 10mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
160mm Swivel and Brake Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH160RN1BSWB)
£27.39160mm Single Bolt Hole (12mm) Swivel Castor with S... Read Morewivel and Wheel Brake (Pressed Steel). Blue Rubber Tyred / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
Designer Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 25mm Ball Bearing (10040PT225)
£111.53100mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Plain Bore (TS4100PT04)
£36.95100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel with smooth Plain Bore. Load Capacity = 225Kg - In Stock
Puncture Proof Wheel 370mm | Puncture Proof Tyre / Red Polypropylene Centre, 170kg, 25.4mm Plain Bore (PP370RP1R)
£43.64370mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Rib Tread on a Red Polypropylene Centre. This Wheel has a 25.4mm Plain Bore, 100mm Tread Width, 66mm Hub Length, and 170kg Load Capacity - In Stock
50mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV050RP)
£2.3250mm Swivel Castor with a non-marking Grey Rubber ... Read MoreTyre Wheel on a nylon centre. This castor is made from Pressed Steel and has a Top Plate with 36x36mm bolt hole centres which suit a 6mm fixing bolt. The load capacity of this castor is 50kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with a grey rubber tyre wheel that will not mark or damage the floor. It is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed. For example, on a trolley or dolly. - In Stock
150mm Swivel Castor with Brake, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKB15020241)
£127.12150mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 700kg - In Stock
150mm Stainless Steel Fixed Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MFS150PNB)
£33.21150mm Top Plate Fixed Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
Expander Fitting, Round Tube, 24mm to 27mm (WR0724/27)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Castor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Ball Bearing (150PT2H)
£89.37150mm Castor Wheel with a Polyurethane Tyre (Revvo... Read Morethane) on a Cast Iron Centre and 20mm Ball Bearings. Load Capacity = 730kg using manual propulsion @ 4km/h.Key Specifications:- Hub Length: 57mm
- Tread Width: 38mm
- Bearing Type: Ball Bearings
- Tyre Hardness: 93 Shore A
- Wear Resistance: Has a life of up to 10 times that of natural rubber under similar conditions and load
- High Load Capacity: Up to 3 times the loading of an equivalent rubber tyre wheel.
- Low Rolling Resistance
- Floor Protection: Shock absorbing, quiet running and will not harm sound floors
- Resistant to Chemicals and Oils: Resistant to a wide range of commonly encountered chemicals and oils such as Mineral Oil, Greases, Hydraulic Fluid, Aliphatic solvents, Petrol, Diesel and cutting oils.
- In Stock
100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH100PT1H)
£108.74100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 340kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
42mm Footmaster Levelling Castor, Stem Fitting, 60kg Capacity | 42mm Nylon Wheel (KGD-40S)
£21.8242mm Foot Master Levelling Castor with an M8 x 15m... Read Morem Threaded stem finished in an ivory coloured powder coating. The swivel head's plate is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 20mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 60kg Static Load and 30kg Dynamic Load (GD-40-S-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
150mm Fixed Castor, 2200kg Capacity | Cast Nylon Wheel, Ball bearing (GXT150ARFMCD)
Original price was: £308.50.£193.75Current price is: £193.75.Sale!150mm Machine Ca... Read Morest Nylon Wheel fitted into an extra strong Fabricated Top Plate Fixed Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 2200kg at 4km/hThis high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical - In Stock
200mm Shock Absorbing Swivel Castor With Brake, 450kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP200BSFMUD)
£87.85200mm Shock absorbing (15mm Compression) Swivel... Read More castor with Brake and Polyurethane Tyred Aluminium Wheel. Load Capacity = 450kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is just over 10mm.
