- Display 15 Products per page
In StockDesigner Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 30mm Plain Bore (15050PT030)
£106.15150mm Polyurethane (Extra Heavy Duty) Tyred / Cast... Read More Iron Centre Wheel with 30mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
Swivel Castor With Brake (Twin Wheel), 200mm, 2000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing, (K2BT200PC2BD)
£679.37200mm Twin Wheel Extra Heavy Duty Swivel Castor wi... Read Moreth Brake and 4-Way Directional Lock. The Square Top Plate measures 230mm x 230mm and has 190mm x 190mm Fixing Bolt Hole Centre. This Caster Comes with Two Polyurethane Tyre on a Cast Iron Centre Wheels Running On Quality Ball Bearings. The Load Capacity Of This Castor Is 2,000kg.The Braking Mechanism on this product is a Wheel Brake only. This means that when the brake is applied it acts only on the castor wheels while the castor's swivel head is free to turn. - In Stock
Pneumatic Wheel 360mm | Pneumatic Tyre / Red Polypropylene Centre, 125kg, 20mm Plain Bore (PWP360PB20)
£25.71360mm Black Pneumatic Rubber Tyre / Red Polypropyl... Read Moreene Centre Wheel (3.50-8). This pneumatic castor wheel has a4 Ply rating tyre with Rib tread, 63mm Hub Length and 20mm Plain Bore. Load Capacity = 125kg.Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impact loads from bad floors. - In Stock
125mm Swivel Castor, 500kg Capacity | Cast Iron Wheel, Ball bearing (HKS12520441)
£69.55125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 500kg - Out of Stock - On the Way
Castor Wheel, 200mm | Rubber Tyre / Cast Iron Centre, 585kg Capacity, 25.4mm Roller Bearing (WRT8LRB)
£58.23200mm Black Rubber Tyre on a Cast Iron Centre Whee... Read Morel (Flexello Brand) with (1 Inch) 25.4mm Roller Bearing. The tread width is 51mm and the hub length is 60mm. Load Capacity = 585kgRubber tyres are gentle on floors and can absorb rolling vibrations making the use of this wheel quieter than a hard tread like Cast Iron and more comfortable for the user. - In Stock
Puncture Proof Wheel 200mm | Puncture Proof Tyre / Red Polypropylene Centre, 50kg, 25mm Roller Bearing (PP200RPB25R)
£22.62200mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Rib Tread on a Red Polypropylene Centre. This Wheel has a 25mm Roller Bearing, 50mm Tread Width, 52mm Hub Length, and 50kg Load Capacity - In Stock
High Temperature Cast Iron Wheel, 150mm, 20mm Steel Roller Bearing, 1180kg (WCI6RBM20HT)
£32.60150mm High Temperature Cast Iron Wheel (Flexello) ... Read Morewith 20mm Steel Roller Bearing, 60mm Hub Length (the distance through the central bore) and 45mm Tread Width. Because this wheel is fitted with a steel caged roller bearing and retainers it is suitable for high temperature use to 200 degrees Celsius. The Load Capacity of the castor wheel is 1180kg.Cast Iron Castor Wheels are a great choice for many rough service applications because they are strong, shock resistant and have a long working life. They have a very low tractive resistance which aids in the ease of movement and are not susceptible to picking up swarf and other floor debris which may hamper the performance of other Castor Wheel materials. - Out of Stock - On the Way
150mm Swivel Castor with Brake, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KBMG150EAB)
£44.81150mm Top Plate Swivel Castor with Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
Puncture Proof Wheel 260mm | Puncture Proof Tyre / Red Polypropylene Centre, 120kg, 25.4mm Plain Bore (PP260RP1D)
£39.64260mm Puncture Proof Wheel (Micro-Cellular Polyure... Read Morethane) with a Diamond Tread on a Red Polypropylene Centre. This Wheel has a 25.4mm Plain Bore, 85mm Tread Width, 76mm Hub Length, and 120kg Load Capacity - Out of Stock - On the Way
40mm Swivel Castor, 15kg Capacity | Polypropylene Wheel, Plain Bore (C041PLN)
£2.38A great value, general purpose, light duty cast... Read Moreor. This 40mm Top Plate Swivel Castor has a housing made from pressed steel and with four 38x38mm Fixing holes Hole Centres to accommodate 6mm bolts. The wheel is a Black Polypropylene Wheel with on a smooth Plain Bore and will not damage or mark concrete floors.
The load capacity of the castor is 15kg and the recommended load capacity over 4 castors is 45kg using manual propulsion at 4 km/h.
- In Stock
Designer Polyurethane Tyre Wheel 150mm | Polyurethane Tyre / Cast Iron, 900kg, 25mm Plain Bore (15050PT025)
£106.15150mm Polyurethane (Extra Heavy Duty) Tyre on a Ca... Read Morest Iron Centre Wheel with 25mm Smooth Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
- In Stock
100mm High Temperature Stainless Steel Swivel Castor, 150kg Capacity | Phenolic Wheel, Plain Bore (MSS100HT)
£30.45100mm High Temperature Top Plate Swivel Castor (St... Read Moreainless Steel Castor) with 80x60mm Bolt Hole Centres and 128mm overall height. Black Phenolic caster wheel with 35mm Tread Width and Smooth Plain Bore. Load Capacity = 150kgThis castor is rated from -40 Deg. C to +280 Deg. C and is made from AISI304 Stainless Steel with a double ball race in the swivel head. - In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
- In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG150PCB)
£59.95150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a Polyurethane Tyre wheel with a Cast Iron Centre and Ball Bearings. Load Capacity = 500kg using manual propulsion at 4 km/h.Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
- Out of Stock - On the Way
125mm Swivel Castor with Brake, 350kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KBMG125CRPCB)
£60.87125mm Swivel Castor (Fabricated Steel) with Swivel... Read More & Wheel Brake and 105x80mm Fixing Bolt Hole Centres. The wheel has a Crown Tread Polyurethane Tyred on Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 350kgKey Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Brake Style: Swivel & Wheel Brake (also known as a Total Stop Brake). Locks the wheel and swivel rotation when applied.
- Overall Height: 165mm
- Offset: 39mm
- Swivel Radius: 147mm
- Bearing Type: Ball Bearing
- Tread Hardness: 92 +/-3 Shore A
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Crowned Polyurethane Tread for easy manoeuvrability.
