- Display 15 Products per page
In StockCastor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 1100kg, 20mm Roller Bearing (200PT15)
£97.83200mm Polyurethane Tyre Wheel on a Cast Iron Centr... Read Moree with a 60mm hub length (the distance through the central bore) and a 20mm Needle Roller Bearing to reduce the rolling resistance. The polyurethane has a shore hardness of 92 - 97 shore A and the Load Capacity of this castor wheel is 1100Kg at 4km/h (walking speed) using manual propulsion.Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move.- In Stock
Threaded Inset, Square, M8 | Suits 1 1/4″ x 1 1/4″ Tube OD with 16 Gauge Wall Thickness (SQRM85854)
£0.47Square Insert with M8 Thread for Square tube with ... Read Moreoutside Diameter of 1 1/4" x 1 1/4" and wall thickness of 16g (1.62mm). Load Capacity = 250kg - In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (Flexello 461RNB)
£25.48100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel fitted with a Roller Bearing. Load Capacity = 160kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating and has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. The roller bearing consists of steel rollers in a plastic cage that minimise rolling resistance even under heavy loads.
- In Stock
100mm LAG Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23606FR)
£70.48100mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (LAG Pressed Steel) with a large Top Plate measuring 135 x 110mm and 105 x 80mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 40mm Tread Width and Ball Bearings. Load Capacity = 300kgA Total Stop Brake means that when applied, both the wheel and swivel rotation is stopped. - In Stock
125mm Swivel Castor with Brake, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV125PN2BSWB)
£15.16125mm Top Plate Swivel Castor with Swivel &... Read More; Wheel Brake and with 80x60mm Bolt Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 200kg - In Stock
150mm Swivel Castor with Brake (Powder Coated), 700kg Capacity | Polyurethane Tyre Wheel (KGHP150BSFMUD)
Original price was: £156.01.£90.44Current price is: £90.44.Sale!150mm Heavy-duty Swivel & Wheel Brake Castor w... Read Moreith a Powder Coated Pressed Steel Bracket and a 200mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball BearingsFeatures:- 700kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Total Stop Brake System: Applying the brake pedal simultaneously locks both the wheel and the swivel rotation.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
- In Stock
100mm Swivel and Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (1322786)
£16.49100mm Bolt Hole Swivel Castor and Swivel & Whe... Read Moreel brake (Pressed Steel) with 10mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
260mm Swivel Castor with Brake, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KS260PPDBR)
£133.04260mm Puncture Proof Braked Castor (Pressed Steel)... Read More with 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kgThe wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. - In Stock
Rubber Tyre Trolley/Sack Truck Wheel 250mm | Black Rubber Tyre / Red Polypropylene (Plastic) Centre, 275kg, 25.4mm Roller Bearing (EPR250R25.4/51RED)
£16.58250mm Black Solid Rubber Tyre on a Red Polypropyle... Read Morene (Plastic) Centre Wheel with a 1 inch (25.4mm) Roller Bearing. Load Capacity = 275kg. The roller bearing consists of steel rollers housed in a plastic cage that roll on the axle to reduce the rolling resistance even under load.This 10 inch diameter wheel (from outside edge of the black rubber tyre) is suitable for use as a trolley or cart wheel, sack truck wheel, castor wheel or anywhere where the axle the wheel is being fitted onto has a 24.5mm (1 Inch) diameter. - In Stock
Castor Wheel 200mm | Rubber Tyre / Cast Iron, 535kg, 20mm Roller Bearing (200RU15)
£50.39200mm Rubber Tyre / Cast Iron Center wheel with 20... Read Moremm Roller Bearing. Load Capacity 553kg - Out of Stock - On the Way
75mm Low Level Fixed Castor, 540kg Capacity | Nylon Wheel, Roller Bearing (BMCF75E)
£20.50This low level business machine castor is made to ... Read Moretake a heavy load with a low overall height of 104mm. This Fixed Castor has a 4 hole top plate measuring 105x79.5mm with 85.4x60.35mm bolt hole centres. Load Capacity = 540kg using manual propulsion at 4km/hThe castor wheel is heavy duty nylon with a 46mm tread width and needle roller bearing to reduce the rolling resistance and is ideal for heavy duty applications where there is an height restriction. The black nylon wheel is gentle on concrete floors. - In Stock
50mm Swivel and Brake Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBHBR)
£3.32This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor with brake (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
150mm Fixed Castor (Powder Coated), 700kg Capacity | Polyurethane Tyre Wheel (KGHP150ARFMUD)
Original price was: £101.26.£58.70Current price is: £58.70.Sale!150mm Heavy-duty Fixed Castor with a Powder Coated... Read More Pressed Steel Bracket and a 200mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball BearingsFeatures:- 700kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have no sideways movement on the wheel to provide exceptional operating performance.
- In Stock
100mm Stainless Steel Swivel Castor With Brake, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NYBR)
£21.26100mm Top Plate Swivel Castor with Brake (Stainles... Read Mores Steel Castor) with 80x60mm Fixing Hole Centres. This castor has a White Nylon Wheel with a Smooth Plain Bore. The Load Capacity is 150kg using manual propulsion at 4km/m (walking Speed).Key Specifications- Top Plate Size: 100x85mm
- Bolt Hole Centres: 80x60mm
- Bolt Hole Size: 8.5x12mm (suits 8mm Fixing Bolts)
- Offset: 37mm
- Overall Height: 128mm
- Brake Style: Swivel & Wheel Brake (also known as a Total Stop Brake). Both the swivel rotation and the wheel is locked when applied.
- Stainless Steel Grade: AISI 304
- In Stock
Pneumatic Wheel 360mm | Pneumatic Tyre / Red Polypropylene Centre, 125kg, 20mm Roller Bearing (PWP360RB20)
£28.56360mm Black Pneumatic Rubber Tyre / Red Polypropyl... Read Moreene Centre Wheel (3.50-8). This pneumatic castor wheel has a 4 Ply rating tyre with Rib tread, 63mm Hub Length and 20mm Roller Bearing. Load Capacity = 125kg.Pneumatic Wheels are rubber tyres that are inflated with air. They are used in either a castor frame or mobile handling equipment such as garden trolleys, carts, sack trucks and other transport equipment. Being a very soft tyre they exceptionally kind on floors and provide great operator comfort. Pneumatic castor wheels have a bit of bounce which lowers the rolling resistance on uneven surfaces. Therefore, they protect the transportation unit from much of the impact loads from bad floors.
