- Display 15 Products per page
-
In StockDesigner Polyurethane Tyre Wheel 100mm | Polyurethane Tyre / Cast Iron, 500kg, 20mm Plain Bore (10040PT020)
£63.35100mm Polyurethane (Extra Heavy Duty) Tyred / Cast ... Read More Iron Centre Wheel with 20mm Plain Bore. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:Reduce load by 25% if continuous use for more than 45 minutes.Reduce Load by further 30% if used as Drive Wheel.Reduce load by further 30% if used at speeds greater than 6kp/h. -
In StockPuncture Proof Wheel 400mm | Puncture Proof Tyre / Red Polypropylene Centre, 200kg, 20mm Plain Bore (PP400RP20D)
£63.43400mm Puncture Proof Wheel (Micro-Cellular Polyure ... Read Morethane) with a Block Tread on a Red Polypropylene Centre. This Wheel has a 20mm Plain Bore, 100mm Tread Width, 66mm Hub Length, and 200kg Load Capacity -
In Stock200mm Fixed Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (KF200NYBJ800)
£63.45200mm Fixed Castor with a 135mm x 110mm Top Plate ... Read Moreand 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water. Being a hard tread it offers the lowest rolling resistance and easiest mobility. This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors -
In Stock150mm Fixed Castor, 370kg Capacity | Rubber Tyre Wheel, Ball bearing (HKF15020341)
£63.48150mm Top Plate Fixed Castor (Fabricated Steel) wi ... Read Moreth 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 370kg -
In Stock200mm Fixed Castor, 1150kg Capacity | Cast Iron Wheel, Roller Bearing (TFH200CI15)
£63.89200mm Heavy Duty Top Plate Fixed Castor (Fabricate ... Read Mored Castor) with 105x80mm Fixing Bolt Hole Centres and a premium quality Cast Iron Wheel with a Roller Bearing. The Load Capacity is 1150kg using manual propulsion at 4km/h. The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm. Use 12mm diameter bolts when fitting at 120 x 60mm Use 10mm diameter bolts when fitting at 105x80/75mm Cast Iron Wheels are a great choice for many rough service applications because they are strong, shock resistant and have a long working life. They have a very low tractive resistance which aids in the ease of movement and are not susceptible to picking up swarf and other floor debris which may hamper the performance of other Castor Wheel materials. Features of the H Series Castor The Genuine Revvo H Series castor is made from heavy gauge forged steel The side plates are press formed to a cylindrical shape to give the best strength to weight ratio Power Towable to 6km/h. -
In Stock160mm Stainless Steel Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS160RNBBH)
£63.95160mm Bolt Hole Swivel Castor (Stainless Steel Cas ... Read Moretor) with 16mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock150mm Swivel Castor with Brake, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing, KSMG150CRPCB (KSMG150CRPCB)
£63.97150mm Swivel Castor (Fabricated Steel) with 105x80 ... Read Moremm Fixing Bolt Hole Centres that suit a 12mm Fixing Bolt. The wheel has a Crown Tread Polyurethane Tyre bonded to a Cast Iron Centre with Ball Bearings. Load Capacity = 500kg Key Specifications: Top Plate Size: 140mm x 110mm Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm Overall Height: 190mm Tread Width: 45mm Castor Offset: 40mm Crown tread wheels have a smaller point of contact with the floor which increases wheel's manoeuvrability by lowering the swivel resistance cause by friction with the floor. -
In Stock150mm Shock Absorbing Fixed Castor With Brake, 360kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP150BRFMUD)
Original price was: £119.80.£63.98Current price is: £63.98. Sale!150mm Shock absorbing (14mm Compression) fixed cas ... Read Moretor with Brake and Polyurethane Tyred Aluminium Wheel. Load Capacity = 360kgFor the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is between 11 and 12mm. -
In StockCastor Wheel 150mm | Nylon, 800kg, 20mm Ball Bearing (150NY2H)
£64.04This 150mm white nylon castor wheel is designed fo ... Read Morer heavy-duty industrial applications where strength, durability, and smooth movement are essential. Manufactured from high-quality impact-resistant nylon, this wheel offers exceptional performance under high loads while maintaining very low rolling and swivel resistance. Equipped with 20mm precision ball bearings, the wheel delivers smooth, efficient rolling even in demanding environments. The nylon construction provides excellent abrasion resistance, long service life, and reliable performance on a wide range of surfaces. With an impressive 800kg load capacity, this wheel is ideal for use on trolleys, machinery, industrial equipment, material handling systems, and heavy-duty castor assemblies. Key Specifications: Wheel Diameter: 150mm Tread Width: 50mm Hub Length: 60mm (distance through the central bore) Wheel Material: White Nylon Shore Hardness: 70 Shore D Bearing Type: Ball Bearings (20mm bore) Maximum Load Capacity: 800kg Benefits: Heavy-duty nylon wheel for industrial use Low rolling and swivel resistance for easy manoeuvrability High abrasion and impact resistance Smooth, reliable performance under heavy loads This robust nylon castor wheel is an excellent choice for applications requiring strength, efficiency, and long-term reliability. -
In StockCrown Tread Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 750kg, 20mm Ball bearing (CR20020241)
£64.07200mm Crown Tread Polyurethane / Cast Iron Wheel w ... Read Moreith 20mm Ball Bearing. Load Capacity = 750kg -
In StockPuncture Proof Wheel 300mm | Puncture Proof Tyre / Red Steel Centre, 150kg, 20mm Roller Bearing (PP300RSB20D)
£64.07300mm Puncture Proof Wheel (Micro-Cellular Polyure ... Read Morethane) on a Red Steel Centre. This Wheel has a 20mm Roller Bearing, 100mm Tread Width, 65mm Hub Length, and 150kg Load Capacity -
In Stock125mm Swivel Castor with Brake, 180kg Capacity | Rubber Tyre Wheel, Ball Bearing (KS125RNB180SWB)
£64.13125mm Top Plate Swivel Castor and Swivel & Whe ... Read Moreel Brake (Industrial Castor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 180kg -
In StockCastor Wheel 150mm | Polyurethane Tyre / Cast Iron Centre, 730kg, 20mm Roller Bearing (150PT15)
£64.63150mm Polyurethane Tyre on a Cast Iron Centre Whee ... Read Morel (Revvo) with a 20mm Roller Bearing, 38mm Tread Width, 60mm Hub (the distance through the central bore) and a 92-97 shore A hardness. This castor wheel's Load Capacity is 730kg using manual propulsion and 4 km/h. Polyurethane tyres have a very high tear and abrasion resistance providing up to 10 times the life of natural rubber when used under similar conditions and loads. Furthermore, they have approximately 30% less rolling resistance compared with comparable rubber tyre wheels making them easier to move. -
In Stock75mm Black Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£64.6475mm Foot Master Levelling Castor with an Black po ... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100-F-NYN-BLK) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. -
In Stock75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100F)
£64.6475mm Foot Master Levelling Castor with an Ivory Co ... Read Morelour powder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 750kg Static Load and 375kg Dynamic Load (GDR-100-F-NYN). Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
